Revel Performa3 M106 is a 2-way Passive Bass Reflex Bookshelf speaker by Revel. It was released in 2013. It features a 1" Hard-Dome with Acoustic Lens Waveguide Tweeter and 1 x 6.5" Aluminum Woofer. The speaker has a frequency range of 59Hz- 20kHz and a sensitivity of 87 dB. Revel M106 has an MSRP of 2200$ per pair but can often be found around 1540$ per pair.
Room Size Suitability
The size of the room where you plan to use the Revel M106 is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Poor |
| Small Room | Average |
| Mid-size Room | Good |
| Large Room | Average |
| Very Large Room | Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Revel's Performa3 Series of Loudspeakers
M106 is a member of Revel's Performa3 series of Passive speakers. The Performa3 range was Revel's mid-tier line of high-performance American speakers. Below you can see the main specs of these speakers.
See all 6 Revel Performa3 models compared »
Revel Performa3 Series Speakers
Revel Performa3 Series Speakers
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Revel M106 Speaker
Revel M106 has a Frequency response range of 59Hz- 20kHz at ±3dB and Power Range of 50-150 watts. With a minimum frequency of 59 Hz, M106 delivers moderate bass depth so depending on your use case, you might want to consider adding a subwoofer to your system.
Here we have a comparison of how M106's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Bookshelf Speakers
Thinking about a subwoofer for the Revel M106?
Among the speakers in our database with a max MSRP price of 3000$ (Pair), these are the 5 Passive Bookshelf speakers that have the deeper bass levels than the Revel M106's 59Hz:
Crossover frequency of the Revel M106?
The crossover frequency of the M106 is set to 2300Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
Revel M106's nominal impedance level is
8 ohms and has a sensitivity of
87 dB.
Sensitivity
Bookshelf Speakers
8 Ohms is pretty much the standard nominal impedance amongst stereo speakers and amplifiers so Revel Performa3 M106 is not considered a difficult to drive speaker from nominal Impedance perspective.
Sensitivity
With a sensitivity level of only 87 dB, Revel Performa3 M106 is a difficult to drive speaker from Sensitivity perspective, make sure to choose an amplifier with a high output if you like listening to your music at high volume levels. You may especially have a hard time using Tube amplifiers which are traditionally very low power compared to Class A/B or Class D amps. Work out how loud the Revel M106 plays in your room →
What amplifier does the Revel M106 need?
At normal listening levels in a medium room, about
15–150 W
per channel into 8 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $2,500, or every amplifier we cover.
Input Type
M106 features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
Work out what gauge speaker cable this run needs →
Revel M106 Back View
Revel M106 External Dimensions and Weight
Revel M106 has external dimensions of (Height x Width x Depth) 15-1/16 x 8-1/4 x 11inch (383.0 x 210.0 x 280.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Revel M106 is approximately 588.0cm2 / 91.1inch2.
To get a better perspective on the real life size of Revel M106, let's compare it with a standard size Compact Disc which has a diameter of 4.7inch (120mm).
Revel M106 Speaker Size Compared to a Compact Disc
Here we place the Revel M106 virtually next to a standard width amplifier and turntable on a BDI Octave Media Cabinet to get a better idea about the size.
Revel M106 Speaker next to an amplifier and turntable
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe Revel M106 weighs 8.41kg / 18.5lbs per piece. Here is a comparison of how M106's weight compares with the average, max and min weights in its class.
Weight
All Bookshelf Speakers
Weight
Bookshelf Speakers under $3000
Revel M106 on a Stand
Cabinet type and Materials
Revel M106 has a
Bass Reflex type cabinet and a Wood/Lacquer finish. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Port Position
Revel M106 is a rear-firing port speaker so you have to make sure you leave enough space between the back of the speaker and wall or bookshelf so that it has room to breathe. M106 comes with
Foam port plug so if you don't have any choice but place the speakers too close to the walls or other surfaces, you can use these plugs in order to avoid boomy or too much bass.
Available colors
Revel M106 is available in Gloss Walnut and Piano Black.
Wall Mounting
M106 doesn't sport any built-in mounting bracket, so you need an external structure to mount it on walls.
Does the Revel M106 come with a Grille?
M106 comes with magnetic grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible. Since the included grille of the M106 is magnetic type, it is very easy to put it on and off.
Revel M106 with Grille
What's in the Box of Revel M106?
Here are the items that are included inside the box of M106:
- Bookshelf loudspeaker
- Grille
- Foam port plug
- Owners Manual
Recommended Accessories
Here is a list of accessories that we think you may need for the Revel Performa3 M106.
- Speaker Cable and Connectors
- Vibration Isolators: IsoAcoustics isolators are our favorite isolators but you may find more affordable options too.
- Acoustic Panels and Treatments: Your room is as important as your stereo equipment so acoustic treatments goes a long way in improving the overall performance.
- Speaker Stands: Stands bring your bookshelf speakers to ideal height (rule of thumb is to have the tweeter level with your ear in your listening position), helps stability and acoustical isolation.
User's Manual
For more information about how to setup, use and maintain the Revel Performa3 M106, use the direct link below to download the official manual document:
Download User Manual for Revel M106
Official Brochure
Here is a link to download the official brochure for the Revel Performa3 M106 speaker:
Official Brochure for Revel M106
Official Product Page
Official manufacturer's product page for the Revel Performa3 M106 speaker can be found below:
Official Product Page for Revel M106
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.