Eversolo has announced the DAC-R8. It is $1,280 in the US, on preorder through Forte Distribution, Eversolo’s US distributor. There is no shipping date yet. Eversolo’s own announcement on 16 November says only that it will “launch soon”.
It is three things in one box: a DAC, a preamp with a real analog volume control, and a headphone amp. The headline is the DAC itself. Eversolo designed it in-house, as a resistor ladder (R2R), instead of buying a chip from ESS or AKM like most DACs at this price.
Eversolo DAC-R8 with its analog VU meter display, stacked on the T8 streaming transport it was sized to match
Quick facts
- Price. $1,280 in the US. Preorder now, no ship date.
- What it is. R2R DAC, preamp and headphone amp. Not a streamer.
- Connections. Digital inputs only (USB, I2S, AES/EBU, coaxial, optical, HDMI ARC, Bluetooth). XLR and RCA outputs, one 6.35 mm headphone jack.
- Headphone power. 1 W into 16 or 32 ohms, 0.16 W into 300 ohms, at high gain.
- Our data. It is the 15th DAC or headphone amp we list, and sits between the iFi NEO iDSD 2 ($999) and the Rotel DX-3 ($1,699).
What R2R means, in one paragraph
Most DACs use a chip that switches very fast and lets a filter smooth the result. An R2R DAC does it the old way. It has a ladder of precision resistors, and each bit of the digital signal switches a step of that ladder on or off. The hard part is making hundreds of resistors match closely enough. Eversolo says it splits the job into a 5-bit coarse ladder and a 20-bit fine ladder, run by an FPGA, with separate paths for PCM and DSD. It plays PCM up to 768 kHz and DSD512 over USB and I2S.
You get three modes: NOS (no oversampling), OS (2x, 4x or 8x oversampling) and BEST, plus six digital filters. Eversolo’s figures for the XLR output are 0.000316 percent THD+N and 130 dB signal to noise. Those are the maker’s numbers. Nobody has measured one yet.
What plugs into it, and what does not
Here is the part to check before you order. The DAC-R8 has no analog inputs. The back panel has analog outputs (XLR and RCA) and digital inputs only. eCoustics’ launch story lists balanced and RCA analog inputs. That is wrong. Eversolo’s spec table lists none, and the photo below shows none.
The back of the Eversolo DAC-R8: digital inputs, HDMI ARC, I2S, clock input and 12 V triggers, and analog outputs only
So if you use it as your preamp, every source has to be digital. A turntable, a phono stage, a cassette deck or the analog output of an old CD player has nowhere to go. If any of those are in your system, you need a different preamp, or a second box to switch between them.
The digital side is generous. USB-B, I2S over an HDMI-type socket, AES/EBU, coaxial and optical, plus HDMI ARC for a TV and Bluetooth 5.4 with aptX Adaptive. The ARC input takes stereo PCM up to 192 kHz. There is also a 10 or 25 MHz clock input and a 12 V trigger in and out.
As a headphone amp: fine, not a powerhouse
Eversolo quotes 1 W into 16 ohms and 1 W into 32 ohms at high gain, and 160 mW into 300 ohms. The jack is single-ended only. There is no balanced headphone output.
I lined that up against the other 14 DAC and headphone amps we list. Six quote more power into 32 ohms, and four of those cost less:
- iFi NEO iDSD 2: 5,551 mW maximum, $999, with a DAC
- Schiit Midgard: 4,800 mW, $219, no DAC
- Schiit Magni Unity: 2,500 mW, $119, DAC optional
- iFi ZEN CAN 3: 2,000 mW balanced, $229, no DAC
The other two, the iFi iDSD Phantom (2,311 mW single-ended) and the Rotel, cost more. The Yamaha HA-L7A quotes the same 1 W as the DAC-R8 at $3,999.
Into 300 ohms the gap is bigger. The DAC-R8 gives 160 mW. The $119 Magni Unity gives 415 mW and the $219 Midgard 750 mW. So if you own hard-to-drive planar or high-impedance headphones, a DAC-R8 is not the best place to spend $1,280.
In fairness, the Rotel is a closer fight than the headline numbers suggest. The Rotel DX-3 ($1,699) quotes 1.4 W into 32 ohms, but that is from its balanced jack. Its single-ended jack gives 383 mW, well under the DAC-R8’s 1 W.
| FEATURE and SPECS COMPARISON | |  |  |  |
| Model | DAC-R8 | NEO iDSD 2 | DX-3 |
| Type | Headphone Amplifier | Headphone Amplifier | Headphone Amplifier |
| THD | 0.000287% @ 1 kHz (headphone out, high gain); 0.000316% XLR line out | <0.0015% | Single-ended < 0.008% @ 70 mW, balanced < 0.004% @ 280 mW (32 ohms, 1 kHz) |
| Signal to Noise Ratio | 127 | 120 | 110 |
| Frequency Bandwidth | 20 Hz-20 kHz | 20 Hz-20 kHz | 20 Hz-20 kHz |
| Built-in DAC | | | |
| DAC | Eversolo OriginR2R discrete R2R, 5+20-bit, FPGA controlled, fully differential | - | 32-bit ESS |
| Phono Input | | - | - |
| Optical Digital Inputs | 1 | - | - |
| Coaxial Digital Inputs | 1 | - | - |
| USB Input | Yes | - | - |
| HDMI ARC | | - | - |
| XLR Input | No | No | No |
| Preamp Outputs | Yes | Yes | Yes |
| Headphone Output | 1/4 | 1/4 | 1/4 |
| Bluetooth | Yes | - | - |
| Wi-Fi | No | - | - |
| Handheld Remote | | - | - |
| Height | 75.0mm | 41.0mm | 73.0mm |
| Width | 315.0mm | 214.0mm | 215.0mm |
| Depth | 230.0mm | 158.0mm | 247.0mm |
| Weight | 4.00kg | 0.92kg | 3.20kg |
| MSRP | 1280 USD | 999 USD | 1699 USD |
| Check Current Price | Amazon, B&H Photo | Amazon, B&H Photo | Amazon, B&H Photo |
iFi NEO iDSD 2: a DAC and headphone amp for $999, with over five times the quoted power of the DAC-R8 into 32 ohms
As a preamp for an Eversolo power amp
This is where the DAC-R8 makes the most sense. The volume control is a stepped resistor ladder switched by relays, fully balanced, so the volume is set in the analog domain rather than by throwing away bits. Eversolo pitches it straight into a power amp or active speakers.
We list three Eversolo power amps, and all three take XLR:
- AMP-F2, $799, 250 W into 4 ohms (Eversolo gives no 8 ohm figure). With the DAC-R8: $2,079.
- AMP-F8, $1,800, 180 W into 8 ohms. With the DAC-R8: $3,080.
- AMP-F10, $2,480, 200 W into 8 ohms. With the DAC-R8: $3,760.
None of those pairs can stream. For that Eversolo wants you to add its T8 streaming transport, $1,380, which is the same width and depth. A T8, DAC-R8 and AMP-F8 stack comes to $4,460. If you only want one box, Eversolo’s own Play streams, decodes and drives speakers for $699, with far less power and no R2R.
The DSP is a nice extra for active speakers. Plug the DAC-R8 into a computer by USB and a browser page gives you parametric EQ, a 20-band EQ, FIR filters up to 8,192 taps, channel delay and REW measurement import. No driver needed.
The 5.2 inch touchscreen on the Eversolo DAC-R8 shows input, sample rate, filter and output at a glance
The catches
No analog inputs. Said above, but it is the one that will catch people. A preamp with no analog inputs is a digital-only preamp.
It does not stream. No Wi-Fi, no Ethernet. You need a computer, a streamer or Eversolo’s $1,380 T8. Bluetooth is there for the phone, not as a main source.
The headphone amp is ordinary for the price. 1 W single-ended is plenty for most dynamic headphones. It is not enough to make the DAC-R8 the best headphone buy at $1,280.
No ship date and no measurements. Every performance figure here is Eversolo’s. R2R DACs are hard to make measure well, so the independent bench tests will matter more than usual.
What I take from it
The DAC-R8 is a digital hub first. Feed it from a computer, a streamer and a TV, run it into a power amp or active speakers, and use the headphone jack when you need it. For that job, an in-house R2R DAC, an analog stepped volume control and real DSP at $1,280 is an interesting package. Just make sure you have no analog sources left, because it cannot take them. And if headphones are the main reason you are shopping, the headphone amps we list include stronger options for less.
Would you give up analog inputs for an R2R DAC and analog volume at this price, or is a turntable still in your system?