The Play is a streaming integrated amplifier by Eversolo that delivers 60 watts x 2 channels into 8 ohms and 110 watts x 2 channels into 4 ohms. It was released in 2025. It is a 2-channel design using a Class D output stage. Speakers connect via binding posts. A minimum impedance of 4 ohms makes it compatible with a wide range of loudspeakers. It has a built-in DAC, so you can play digital sources directly with no separate DAC unit needed. It also has a phono input, so a turntable can connect straight to it. The Eversolo Play has an MSRP of $699.
Performance Specs
One of the most important factors when deciding on an integrated amplifier is its power ratings and compatibility with your speaker's impedance requirements. The Eversolo Play is rated at 60 watts RMS into 8-ohms. Eversolo provides this wattage at a THD (Total Harmonic Distortion) of 0.0037% which is an important indicator of distortion at the given values (lower THD is better).
Here are the main highlights of its performance specs:
- 60 watts into 8-ohms at 0.0037%
- 110 watts into 4-ohms
- 4-ohms Min Impedance (allows compatibility with a wide range of loudspeakers)
- 109dB Signal to Noise Ratio
Built-in Sources
Most integrated amplifiers expect you to bring your own source. Eversolo Play does not:
- Internet radio radio built in.
How loud will 60 watts actually play in your room? →
Wiring more than one pair of speakers to it? Check the load first →
Which speakers suit the Eversolo Play?
60 W into 8 ohms, 110 W into 4, rated down to 4 ohms.
We rank every passive speaker we cover against it on power, impedance safety and current
delivery.
Need more power?
Eversolo Play is rated at 60 watts into 8 ohms, which puts it in our Up to 60 watts band. The next band up is 61 to 90 watts, which is worth about 3.9dB more output. That is a real difference in headroom on peaks, and a modest one in how loud the system plays - power and loudness are not the same thing.
Before buying watts, check what your speakers actually need: the amp and speaker matcher works it out from their sensitivity, impedance and your room.
When pairing the Eversolo Play with a passive Bookshelf (Stand mount) or Passive Floor Standing (Tower) speaker, you have to check if their Max Power Range is below the max wattage of the amp for the given impedance levels.
Operating your amp outside of this max range may damage the speakers.
What size of room is the Eversolo Play Amplifier good for?
An essential deciding factor is the size of the room in which you intend to employ the Eversolo Play amplifier. Here, taking into account its maximum power parameters, we analyzed its applicability to various size environments:
| Listening Environment |
Suitability |
| Near-field | Average |
| Small Room | Good |
| Mid-size Room | Average |
| Large Room | Poor |
| Very Large Room | Bad |
Inputs and Outputs
Besides the performance specs of the Eversolo Play, the next important feature set that you have to evaluate is the input and output selections that it offers.
Eversolo Play has total of 2 Analog inputs .
Inputs
- Total Number of Analog Inputs: 2
- Phono Input
- Yes Optical Digital Input
- Yes Coaxial Digital Input
- USB Input
- HDMI Input (Yes)
Outputs
- Speaker Outputs
- Yes Headphone Output
- Subwoofer Output
Bluetooth Connectivity
Eversolo Play features built-in Bluetooth for wireless music streaming from your Bluetooth-enabled devices such as Apple iPod/iPhone/iPad, Android smartphone/tablet, Windows PC, Mac computers/laptops.
Among the amps in the same price range, these are the 5 amps that have Bluetooth Connectivity:
Phono Input
Eversolo Play features two Phono Inputs which are compatible with
MM (Moving Magnet) type of phono cartridges, you can connect your turntable with MM cartridges directly to this amp without the need for a phono preamp. If you are using an MC cartridge on your turntable, you need to use a phono preamp that has MC phono stage such as the
Cambridge Duo or the
iFi ZEN Phono.
Subwoofer Output
Eversolo Play has a dedicated subwoofer output which can be used to connect it directly to a powered subwoofer via an LFE(Low Frequency Effects) cable.
Check our
Powered Subwoofers page to find a subwoofer that will work with Eversolo Play amp and your speakers.
DAC and Digital Music
The Eversolo Play's built-in DAC allows the connection of digital sources directly, eliminating the need for an external DAC.
Eversolo Play Pros and Cons
Drawn from the published figures on this page, not from listening.
- ✓Power nearly doubles into a harder load, 60 watts into 8 ohms rising to 110 into 4, which points to a power supply with real current in reserve.
- ✓Class D output stage, so it runs cool and wastes little power as heat - which is how it fits in a small case.
- ✓Signal-to-noise ratio of 109dB, so the amplifier itself should be inaudible between tracks.
- ✓Distortion is specified at 0.0037%, an order of magnitude below what is generally held to be audible.
- ✓Built-in DAC handling 32-bit / 768 and DSD, so a TV, computer or streamer can connect digitally with nothing in between.
- ✓Phono stage built in (MM), so a turntable needs no separate preamplifier.
- ✓Streams over the network without a separate streamer: Tidal, Qobuz and Amazon Music; Roon.
- ✓Bluetooth for playing straight from a phone.
- ✓Headphone output.
- ✓At 230mm wide it fits where a full-size component will not.
- ✓Built-in Internet radio tuner.
- ✓App control.
- ✗The phono stage is moving-magnet only; a moving-coil cartridge would need a step-up or an external stage.
Eversolo Play External Dimensions and Weight
Eversolo Play has external dimensions of (H x W x D) 2-15/16 x 9-1/16 x 9-1/16 inch (75 x 230 x 230 mm ). The unit weighs
2.59 kg (5.7 lbs).
Base Surface Area
Base surface area of an integrated amplifier may become an important decision factor when the space in your room or desk is limited.
The base area of the Eversolo Play is approximately 529.0cm2 / 82.0inch2.
- Width: 230.0mm (9-1/16")
- Height: 75.0mm (2-15/16")
- Depth: 230.0mm (9-1/16")
- Weight: 2.59 kg (5.7 lbs)
- Base Surface Area: ~529.0cm2 / 82.0inch2
- Volume: ~4.0 liter / 1.0 gallon
Available colors
Eversolo Play is available in Black and Silver color options.
| General |
| Brand |
Eversolo |
| Full Model Name |
Eversolo Play |
| Release Date |
2025 |
| Amplifier Type |
Integrated Amplifier |
| Number of Channels |
2 |
| Amp Class |
Class D |
| Amplifier Technology |
Solid State |
| Performance |
| Watts RMS per Channel into 8-ohms |
60 watts |
| Watts RMS per Channel into 6-ohms |
N/A |
| Watts RMS per Channel into 4-ohms |
110 watts |
| Frequency Bandwidth |
|
| Damping Factor |
107 |
| THD |
0.0037% |
| Minimum Impedance |
4 |
| Signal to Noise Ratio |
109 dB |
| Digital Music |
| Built-in DAC |
Yes |
| Bluetooth |
Yes |
| WiFi |
Yes |
| Ecosystem |
| Apple AirPlay |
|
| Apple AirPlay2 |
|
| DTS Play-Fi |
|
| Chromecast built-in |
|
| Roon |
Ready |
| HEOS |
|
| BluOS |
|
| CONNECTIONS |
| Total Analog Inputs |
2 |
| Phono Input |
Yes |
| Optical Digital Inputs |
Yes |
| Coaxial Digital Inputs |
Yes |
| USB Input |
Yes |
| Headphone Output |
Yes |
| Subwoofer Output |
Yes |
| Removable Power Cord |
|
| Speaker Connectors |
Binding posts |
| PHYSICAL SPECS |
| Height |
75.0mm (2-15/16") |
| Width |
230.0mm (9-1/16") |
| Depth |
230.0mm (9-1/16") |
| Weight |
2.59 kg (5.7 lbs) |
| Available Colors |
Black,Silver |
| OTHER |
| Screen |
Yes |
| Parts Warranty |
|
| Labor Warranty |
|