The POWERNODE Edge is a streaming integrated amplifier by Bluesound that delivers 40 watts x 2 channels into 8 ohms. It was released in October 2022. It is a 2-channel design using a Class D output stage. A minimum impedance of 4 ohms makes it compatible with a wide range of loudspeakers. It has a built-in DAC, so you can play digital sources directly with no separate DAC unit needed. The Bluesound POWERNODE Edge has an MSRP of $649.
There are 3 Bluesound amplifiers in our database. Below you can see the main specs of these amps.
Bluesound Integrated Amplifier Series
Performance Specs
One of the most important factors when deciding on an integrated amplifier is its power ratings and compatibility with your speaker's impedance requirements. The Bluesound POWERNODE Edge is rated at 40 watts RMS into 8-ohms. Bluesound provides this wattage at a THD (Total Harmonic Distortion) of 0.008% which is an important indicator of distortion at the given values (lower THD is better).
Here are the main highlights of its performance specs:
- 40 watts into 8-ohms (20 Hz-20 kHz) at 0.008%
- 4-ohms Min Impedance (allows compatibility with a wide range of loudspeakers)
- 92dB Signal to Noise Ratio
How loud will 40 watts actually play in your room? →
Wiring more than one pair of speakers to it? Check the load first →
Which speakers suit the Bluesound POWERNODE Edge?
40 W into 8 ohms, rated down to 4 ohms.
We rank every passive speaker we cover against it on power, impedance safety and current
delivery.
Need more power?
Bluesound POWERNODE Edge is rated at 40 watts into 8 ohms, which puts it in our Up to 60 watts band. The next band up is 61 to 90 watts, which is worth about 3.9dB more output. That is a real difference in headroom on peaks, and a modest one in how loud the system plays - power and loudness are not the same thing.
Before buying watts, check what your speakers actually need: the amp and speaker matcher works it out from their sensitivity, impedance and your room.
When pairing the Bluesound POWERNODE Edge with a passive Bookshelf (Stand mount) or Passive Floor Standing (Tower) speaker, you have to check if their Max Power Range is below the max wattage of the amp for the given impedance levels.
Operating your amp outside of this max range may damage the speakers.
What size of room is the Bluesound POWERNODE Edge Amplifier good for?
An essential deciding factor is the size of the room in which you intend to employ the Bluesound POWERNODE Edge amplifier. Here, taking into account its maximum power parameters, we analyzed its applicability to various size environments:
| Listening Environment |
Suitability |
| Near-field | Good |
| Small Room | Good |
| Mid-size Room | Average |
| Large Room | Poor |
| Very Large Room | No way |
Inputs and Outputs
Besides the performance specs of the Bluesound POWERNODE Edge, the next important feature set that you have to evaluate is the input and output selections that it offers.
Bluesound POWERNODE Edge has total of 1 Analog inputs .
Bluesound POWERNODE Edge Back View (Click the image for the larger version)
Inputs
- Total Number of Analog Inputs: 1
- 1 Optical Digital Input
- USB Input:
- USB-A(playing files from a thumb drive or external hard drive)
Outputs
- Speaker Outputs
- Mono-RCA(Sub) Preamp Outputs
- Subwoofer Output (1)
Bluetooth Connectivity
Bluesound POWERNODE Edge features built-in Bluetooth 5.0 for wireless music streaming from your Bluetooth-enabled devices such as Apple iPod/iPhone/iPad, Android smartphone/tablet, Windows PC, Mac computers/laptops.
Among the amps in the same price range, these are the 5 amps that have Bluetooth Connectivity:
Bluesound POWERNODE Edge supports the following Bluetooth Codecs when used with supported devices:
Bluetooth Transmitter:Bluesound POWERNODE Edge can also act as a Bluetooth transmitter, making it possible to stream the music from the amp to your bluetooth headphones or speakers.
Phono Input
Bluesound POWERNODE Edge doesn't have a phono input so in order to play your vinyl albums, Bluesound POWERNODE Edge has to be paired with a Phono Preamp that is MM (Moving Magnet) or/and MC (Moving COil) depending on your cartridge type.
Subwoofer Output
Bluesound POWERNODE Edge has a dedicated subwoofer output which can be used to connect it directly to a powered subwoofer via an LFE(Low Frequency Effects) cable.
Check our
Powered Subwoofers page to find a subwoofer that will work with Bluesound POWERNODE Edge amp and your speakers.
DAC and Digital Music
The Bluesound POWERNODE Edge's built-in DAC allows the connection of digital sources directly, eliminating the need for an external DAC.
Bluesound POWERNODE Edge External Dimensions and Weight
Bluesound POWERNODE Edge has external dimensions of (H x W x D) 1.75inch x 8.6875inch x 8.5inch (44.4mm x 220.7mm x 215.9mm ). The unit weighs
1.37 kg (3 lbs).
Base Surface Area
Base surface area of an integrated amplifier may become an important decision factor when the space in your room or desk is limited.
The base area of the Bluesound POWERNODE Edge is approximately 476.5cm2 / 73.9inch2.
- Width: 220.7mm (8.6875")
- Height: 44.4mm (1.75")
- Depth: 215.9mm (8.5")
- Weight: 1.37 kg (3 lbs)
- Base Surface Area: ~476.5cm2 / 73.9inch2
- Volume: ~2.1 liter / 0.6 gallon
Bluesound POWERNODE Edge - Top View
Available colors
Bluesound POWERNODE Edge is available in Black and White color options.
What's in the Box of Bluesound POWERNODE Edge?
Here are the items that are included inside the box of POWERNODE Edge:
- Wireless music streaming amplifier
- 6-feet AC power cord
- 58-inch Ethernet cable
- Optical-to-3.5mm adapter
- Mounting bracket
- Mounting screw
- Rubber mount attachment
- Quick Setup Guide
- Warranty Information
- License Agreement
User's Manual
For more information about how to setup, use and maintain the Bluesound POWERNODE Edge, use the direct link below to download the official manual document:
Download User Manual for Bluesound POWERNODE Edge
Official Product Page
Official manufacturer's product page for the Bluesound POWERNODE Edge Integrated Amplifier can be found below:
Official Product Page for Bluesound POWERNODE Edge
Warranty
1 Year of parts warranty and 1 Year of labor warranty is generally provided for the Bluesound POWERNODE Edge by the manufacturer.
| General |
| Brand |
Bluesound |
| Full Model Name |
Bluesound POWERNODE Edge |
| Release Date |
October 2022 |
| Amplifier Type |
Integrated Amplifier |
| Number of Channels |
2 |
| Amp Class |
Class D |
| Amplifier Technology |
Solid State |
| Performance |
| Watts RMS per Channel into 8-ohms |
40 watts |
| Watts RMS per Channel into 6-ohms |
N/A |
| Watts RMS per Channel into 4-ohms |
N/A |
| Frequency Bandwidth |
20 Hz-20 kHz |
| THD |
0.008% |
| Minimum Impedance |
4 |
| Signal to Noise Ratio |
92 dB |
| Digital Music |
| Built-in DAC |
Yes |
| Bluetooth |
Yes |
| WiFi |
Yes |
| Ecosystem |
| Apple AirPlay |
Yes |
| Apple AirPlay2 |
Yes |
| DTS Play-Fi |
No |
| Chromecast built-in |
No |
| Roon |
Ready |
| HEOS |
No |
| BluOS |
Yes |
| CONNECTIONS |
| Total Analog Inputs |
1 |
| Phono Input |
No |
| Optical Digital Inputs |
1 |
| Coaxial Digital Inputs |
No |
| USB Input |
Yes |
| USB Type |
USB-A(playing files from a thumb drive or external hard drive) |
| Preamp Outputs |
Mono-RCA(Sub) |
| Pre-out / Main-in Loop |
No |
| Headphone Output |
No |
| Subwoofer Output |
Yes |
| Removable Power Cord |
|
| PHYSICAL SPECS |
| Height |
44.4mm (1.75") |
| Width |
220.7mm (8.6875") |
| Depth |
215.9mm (8.5") |
| Weight |
1.37 kg (3 lbs) |
| Available Colors |
Black,White |
| OTHER |
| Parts Warranty |
1 Year |
| Labor Warranty |
1 Year |