The PMA-1700NE is an Integrated Amplifier with built-in DAC by Denon that delivers 70 watts x 2 channels into 8 ohms and 140 watts x 2 channels into 4 ohms. Minimum impedance of 4 ohms makes the PMA-1700NE compatible with a wide range of loudspeakers. Thanks to its built-in TI (Texas Instruments) PMC1795 32-bit/384kHz DAC, you can play digital sources directly without the need for an external DAC unit. Denon PMA-1700NE lets you connect your turntable via its Phono input and start listening to your vinyl collection without a hassle. Denon PMA-1700NE has an MSRP of 2099$.
There are 5 Denon amplifiers in our database. Below you can see the main specs of these amps.
Denon Integrated Amplifier Series
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Performance Specs
One of the most important factors when deciding on an integrated amplifier is its power ratings and compatibility with your speaker's impedance requirements.The Denon PMA-1700NE is rated at 70 watts RMS into 8-ohms. Denon provides this wattage at a THD (Total Harmonic Distortion) of 0.07% which is an important indicator of distortion at the given values (lower THD is better).
Here are the main highlights of its performance specs:
- 70 watts into 8-ohms (20-20k) at 0.07%
- 140 watts into 4-ohms
- 4-ohms Min Impedance (allows compatibility with a wide range of loudspeakers)
- 107dB Signal to Noise Ratio
When pairing the Denon PMA-1700NE with a passive Bookshelf (Stand mount) or Passive Floor Standing (Tower) speaker, you have to check if their Max Power Range is below the max wattage of the amp for the given impedance levels.
Operating your amp outside of this max range may damage the speakers.
What size of room is the Denon PMA-1700NE Amplifier good for?
An essential deciding factor is the size of the room in which you intend to employ the Denon PMA-1700NE amplifier. Here, taking into account its maximum power parameters, we analyzed its applicability to various size environments:
Listening Environment |
Suitability |
Near-field | Poor |
Small Room | Average |
Mid-size Room | Good |
Large Room | Average |
Very Large Room | Poor |
Inputs and Outputs
Besides the performance specs of the Denon PMA-1700NE, the next important feature set that you have to evaluate is the input and output selections that it offers.
Denon PMA-1700NE has total of 3 Analog inputs including 1 Phono Input (MM,MC).
Inputs
- Total Number of Analog Inputs: 3
- Phono Input
- 2 Optical Digital Input
- 1 Coaxial Digital Input
- USB Input:
Outputs
Bluetooth Connectivity
Denon PMA-1700NE doesn't have bluetooth connectivity feature. In order to stream your music via bluetooth, the easiest way is to connect an external bluetooth receiver to your Denon PMA-1700NE. Two bluetooth receivers that we recommend are the
iFi Zen Blue V2 and the
Audioengine B1.
Among the amps in the same price range, these are the 5 amps that have Bluetooth Connectivity:
Phono Input
Denon PMA-1700NE features one Phono Input which is compatible with
MM (Moving Magnet) type of phono cartridges, you can connect your turntable with MM cartridges directly to this amp without the need for a phono preamp. If you are using an MC cartridge on your turntable, you need to use a phono preamp that has MC phono stage such as the
Cambridge Duo or the
iFi ZEN Phono.
DAC and Digital Music
The Denon PMA-1700NE's built-in DAC allows the connection of digital sources directly, eliminating the need for an external DAC. The DAC chip that is used in the PMA-1700NE is the
TI (Texas Instruments) PMC1795 32-bit/384kHz, and supports resolutions up to
32-bit, 384KHZ.
Denon PMA-1700NE External Dimensions and Weight
Denon PMA-1700NE has external dimensions of (H x W x D) 5-5/16inch x 17-1/8inch x 17-5/8inch (135.0mm x 435.0mm x 448.0mm ). The unit weighs
17.64kg / 38.8lbs.
Base Surface Area
Base surface area of an integrated amplifier may become an important decision factor when the space in your room or desk is limited.
The base area of the Denon PMA-1700NE is approximately 1948.8cm2 / 302.1inch2.
- Width: 435.0mm (17-1/8")
- Height: 135.0mm (5-5/16")
- Depth: 448.0mm (17-5/8")
- Weight: 17.64 kg (38.80lbs)
- Base Surface Area: ~1948.8cm2 / 302.1inch2
- Volume: ~26.3 liter / 6.9 gallon
Available colors
Denon PMA-1700NE is available in Black and Silver color options.
What's in the Box of Denon PMA-1700NE?
Here are the items that are included inside the box of PMA-1700NE:
Integrated amplifier68-inch AC power cordRemote control (RC-1249)2 AAA batteriesQuick Start GuideSafety InstructionsWarranty Information
Official Product Page
Official manufacturer's product page for the Denon PMA-1700NE Integrated Amplifier can be found below:
Official Product Page for Denon PMA-1700NE
Warranty
3 Years of parts warranty and 3 Years of labor warranty is generally provided for the Denon PMA-1700NE by the manufacturer.
General |
Brand |
Denon |
Full Model Name |
Denon PMA-1700NE |
Amplifier Type |
Integrated Amplifier |
Performance |
Watts RMS per Channel into 8-ohms |
70 watts |
Watts RMS per Channel into 6-ohms |
N/A |
Watts RMS per Channel into 4-ohms |
140 watts |
Frequency Bandwidth |
20-20k |
THD |
0.07% |
Minimum Impedance |
4 |
Signal to Noise Ratio |
107 dB |
Digital Music |
Built-in DAC |
Yes |
DAC Specs |
TI (Texas Instruments) PMC1795 32-bit/384kHz |
Bluetooth |
No |
WiFi |
N/A |
Ecosystem |
Apple AirPlay |
No |
Apple AirPlay2 |
No |
DTS Play-Fi |
No |
Chromecast built-in |
No |
Roon |
No |
HEOS |
No |
BluOS |
No |
CONNECTIONS |
Total Analog Inputs |
3 |
Phono Input |
Yes |
Optical Digital Inputs |
2 |
Coaxial Digital Inputs |
1 |
USB Input |
Yes |
Preamp Outputs |
No |
Pre-out / Main-in Loop |
No |
Headphone Output |
1/4 |
Removable Power Cord |
IEC 2-prong |
PHYSICAL SPECS |
Height |
135.0mm (5-5/16") |
Width |
435.0mm (17-1/8") |
Depth |
448.0mm (17-5/8") |
Weight |
17.64 kg (38.80lbs) |
Available Colors |
Black,Silver |
OTHER |
Tone Controls |
Yes |
Parts Warranty |
3 Years |
Labor Warranty |
3 Years |