The 9000A is an integrated amplifier with built-in DAC by Audiolab that delivers 100 watts x 2 channels into 8 ohms and 160 watts x 2 channels into 4 ohms. It was released in November 2022. It is a 2-channel design using a Class A/B output stage. A minimum impedance of 4 ohms makes it compatible with a wide range of loudspeakers. It has a built-in DAC (ES9038Pro 32-bit), so you can play digital sources directly with no separate DAC unit needed. It also has a phono input, so a turntable can connect straight to it. The Audiolab 9000A has an MSRP of $2,999.
There are 7 Audiolab amplifiers in our database. Below you can see the main specs of these amps.
Audiolab Integrated Amplifier Series
Performance Specs
One of the most important factors when deciding on an integrated amplifier is its power ratings and compatibility with your speaker's impedance requirements. The Audiolab 9000A is rated at 100 watts RMS into 8-ohms. Audiolab provides this wattage at a THD (Total Harmonic Distortion) of 0.002% which is an important indicator of distortion at the given values (lower THD is better).
Here are the main highlights of its performance specs:
- 100 watts into 8-ohms (20 Hz-20 kHz) at 0.002%
- 160 watts into 4-ohms
- 4-ohms Min Impedance (allows compatibility with a wide range of loudspeakers)
- 110dB Signal to Noise Ratio
How loud will 100 watts actually play in your room? →
Wiring more than one pair of speakers to it? Check the load first →
Which speakers suit the Audiolab 9000A?
100 W into 8 ohms, 160 W into 4, rated down to 4 ohms.
We rank every passive speaker we cover against it on power, impedance safety and current
delivery.
Need more power?
Audiolab 9000A is rated at 100 watts into 8 ohms, which puts it in our 91 to 120 watts band. The next band up is 121 to 180 watts, which is worth about 1.5dB more output. That is a real difference in headroom on peaks, and a modest one in how loud the system plays - power and loudness are not the same thing.
Before buying watts, check what your speakers actually need: the amp and speaker matcher works it out from their sensitivity, impedance and your room. Plenty of systems are better served by the 61 to 90 watts band and better speakers.
When pairing the Audiolab 9000A with a passive Bookshelf (Stand mount) or Passive Floor Standing (Tower) speaker, you have to check if their Max Power Range is below the max wattage of the amp for the given impedance levels.
Operating your amp outside of this max range may damage the speakers.
What size of room is the Audiolab 9000A Amplifier good for?
An essential deciding factor is the size of the room in which you intend to employ the Audiolab 9000A amplifier. Here, taking into account its maximum power parameters, we analyzed its applicability to various size environments:
| Listening Environment |
Suitability |
| Near-field | Poor |
| Small Room | Poor |
| Mid-size Room | Good |
| Large Room | Good |
| Very Large Room | Average |
Inputs and Outputs
Besides the performance specs of the Audiolab 9000A, the next important feature set that you have to evaluate is the input and output selections that it offers.
Audiolab 9000A has total of 3 Analog inputs including 1 Phono Input (MM).
Audiolab 9000A Back View (Click the image for the larger version)
Inputs
- Total Number of Analog Inputs: 3
- Phono Input
- 2 Optical Digital Input
- 2 Coaxial Digital Input
- USB Input:
- USB-A(Service Only)
- USB-B
- HDMI Input (Arc)
Audiolab 9000A Connections
Outputs
- Speaker Outputs
- Stereo RCA Preamp Outputs
- Pre-out/Main-in Loop
- 1/4 Headphone Output
Bluetooth Connectivity
Audiolab 9000A features built-in Bluetooth 5.1 for wireless music streaming from your Bluetooth-enabled devices such as Apple iPod/iPhone/iPad, Android smartphone/tablet, Windows PC, Mac computers/laptops.
Among the amps in the same price range, these are the 5 amps that have Bluetooth Connectivity:
Audiolab 9000A supports the following Bluetooth Codecs when used with supported devices:
Phono Input
Audiolab 9000A features one Phono Input which is compatible with
MM (Moving Magnet) type of phono cartridges, you can connect your turntable with MM cartridges directly to this amp without the need for a phono preamp. If you are using an MC cartridge on your turntable, you need to use a phono preamp that has MC phono stage such as the
Cambridge Duo or the
iFi ZEN Phono.
Subwoofer Output
Audiolab 9000A has Stereo RCA preamp outputs which can be used to connect to a powered subwoofer via an RCA cable ( as long as your sub supports this connection).
Check our
Powered Subwoofers page to find a subwoofer that will work with Audiolab 9000A amp and your speakers.
Audiolab 9000A Antennas
Balanced connections
Audiolab 9000A has a balanced XLR input. A balanced cable carries the signal twice, on two conductors of opposite polarity. Interference picked up along the way lands on both equally and cancels when the two are recombined at the far end, so the longer the cable run and the noisier the surroundings, the more the connection is worth. Whether a balanced connection also yields more power depends on how the amplifier is built inside - some are balanced end to end, others convert to single-ended internally and deliver the same power either way, so it is worth reading the maker's own wording rather than assuming.
DAC and Digital Music
The Audiolab 9000A's built-in DAC allows the connection of digital sources directly, eliminating the need for an external DAC. The DAC chip that is used in the 9000A is the
ES9038Pro 32-bit, and supports resolutions up to
32-bit, 192KHZ.
Audiolab 9000A Handheld Remote
Audiolab 9000A External Dimensions and Weight
Audiolab 9000A has external dimensions of (H x W x D) 3.50inch x 17.5inch x 13.4inch (89.0mm x 444.0mm x 342.0mm ). The unit weighs
9.4 kg (20.7 lbs).
Base Surface Area
Base surface area of an integrated amplifier may become an important decision factor when the space in your room or desk is limited.
The base area of the Audiolab 9000A is approximately 1518.0cm2 / 235.3inch2.
- Width: 444.0mm (17.5")
- Height: 89.0mm (3.50")
- Depth: 342.0mm (13.4")
- Weight: 9.4 kg (20.7 lbs)
- Base Surface Area: ~1518.0cm2 / 235.3inch2
- Volume: ~13.5 liter / 3.6 gallon
Audiolab 9000A screen
Available colors
Audiolab 9000A is available in Black and Silver color options.
What's in the Box of Audiolab 9000A?
Here are the items that are included inside the box of 9000A:
- Audiolab 9000A Stereo 100W Integrated Amplifier (Silver)
- Remote Control
- Power Cord
- Antenna
- Limited 3-Year Warranty
User's Manual
For more information about how to setup, use and maintain the Audiolab 9000A, use the direct link below to download the official manual document:
Download User Manual for Audiolab 9000A
Official Brochure
Here is a link to download the official brochure for the Audiolab 9000A Integrated Amplifier:
Official Brochure for Audiolab 9000A
Official Product Page
Official manufacturer's product page for the Audiolab 9000A Integrated Amplifier can be found below:
Official Product Page for Audiolab 9000A
Warranty
2 Years of parts warranty and 2 Years of labor warranty is generally provided for the Audiolab 9000A by the manufacturer.
| General |
| Brand |
Audiolab |
| Full Model Name |
Audiolab 9000A |
| Release Date |
November 2022 |
| Amplifier Type |
Integrated Amplifier |
| Number of Channels |
2 |
| Amp Class |
Class A/B |
| Amplifier Technology |
Solid State |
| Performance |
| Watts RMS per Channel into 8-ohms |
100 watts |
| Watts RMS per Channel into 6-ohms |
N/A |
| Watts RMS per Channel into 4-ohms |
160 watts |
| Frequency Bandwidth |
20 Hz-20 kHz |
| THD |
0.002% |
| Minimum Impedance |
4 |
| Signal to Noise Ratio |
110 dB |
| Digital Music |
| Built-in DAC |
Yes |
| DAC Specs |
ES9038Pro 32-bit |
| Bluetooth |
Yes |
| WiFi |
|
| Ecosystem |
| Apple AirPlay |
No |
| Apple AirPlay2 |
No |
| DTS Play-Fi |
No |
| Chromecast built-in |
No |
| Roon |
No |
| HEOS |
No |
| BluOS |
No |
| CONNECTIONS |
| Total Analog Inputs |
3 |
| Phono Input |
Yes |
| Optical Digital Inputs |
2 |
| Coaxial Digital Inputs |
2 |
| USB Input |
Yes |
| USB Type |
USB-A(Service Only), USB-B |
| Preamp Outputs |
Stereo RCA |
| Pre-out / Main-in Loop |
Yes |
| Headphone Output |
1/4 |
| Removable Power Cord |
IEC 2-prong |
| PHYSICAL SPECS |
| Height |
89.0mm (3.50") |
| Width |
444.0mm (17.5") |
| Depth |
342.0mm (13.4") |
| Weight |
9.4 kg (20.7 lbs) |
| Available Colors |
Black,Silver |
| OTHER |
| Screen |
4.3-inch (800 x 480mm) Large Size Full View IPS |
| Parts Warranty |
2 Years |
| Labor Warranty |
2 Years |