SpeakerDecision
  • SPEAKERS by TYPE
    • Passive Bookshelf Speakers
    • Passive Floor-standing Speakers
    • Passive Center Channel Speakers
    • Passive In-wall Speakers
    • All Passive Speakers
    • Powered Subwoofers
    • Powered Stereo Speakers
  • AMPLIFIERS
  • SMART FIND
Audiolab 6000A MKII Review
Audiolab 6000A MKII

Main Features

  • 50 watts RMS into 8-ohms
  • Built-in DAC
  • Phono Input
  • Bluetooth v5.1
  • Weight: 17.19 lbs / 7.80 kg
  • Dimensions (H x W x D):3-1/8 x 17-9/16 x 14-1/16 inch
CHECK PRICE

Compare To

x
Add an Amp for comparison
Audiolab 6000A MKII Review
Audiolab 6000A MKII Audiolab 6000A MKII
See at AMAZON

The 6000A MKII is an Integrated Amplifier by Audiolab that delivers 50 watts x 2 channels into 8 ohms and 75 watts x 2 channels into 4 ohms. Minimum impedance of 4 ohms makes the 6000A MKII compatible with a wide range of loudspeakers. Thanks to its built-in ESS Sabre ES9038Q2M DAC, you can play digital sources directly without the need for an external DAC unit. Audiolab 6000A MKII lets you connect your turntable via its Phono input and start listening to your vinyl collection without a hassle. Audiolab 6000A MKII has an MSRP of 1099$.

Audiolab 6000A MKII Amplifier Internal View
Audiolab 6000A MKII Amplifier Internal View

There are 7 Audiolab amplifiers in our database. Below you can see the main specs of these amps.

Audiolab Integrated Amplifier Series
Model Watts RMS (8-ohms) Minimum Impedance Built-in DAC Bluetooth
Audiolab 7000A
Compare
70 watts4-ohmsYesYes
Audiolab 6000A
Compare
50 watts4-ohmsYesYes
Audiolab 8300A
Compare
75 watts4-ohmsNo
Audiolab 9000A
Compare
100 watts4-ohmsYesYes
Audiolab 6000A MKII
50 watts4-ohmsYesYes
Audiolab 6000A Play
Compare
50 watts4-ohmsYesYes
Audiolab Omnia
Compare
50 watts4-ohmsYesYes


**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.

Performance Specs

One of the most important factors when deciding on an integrated amplifier is its power ratings and compatibility with your speaker's impedance requirements.The Audiolab 6000A MKII is rated at 50 watts RMS into 8-ohms. Audiolab provides this wattage at a THD (Total Harmonic Distortion) of 0.0004% which is an important indicator of distortion at the given values (lower THD is better).

Here are the main highlights of its performance specs:

  • 50 watts into 8-ohms (20-20k) at 0.0004%
  • 75 watts into 4-ohms
  • 4-ohms Min Impedance (allows compatibility with a wide range of loudspeakers)
  • 110dB Signal to Noise Ratio

When pairing the Audiolab 6000A MKII with a passive Bookshelf (Stand mount) or Passive Floor Standing (Tower) speaker, you have to check if their Max Power Range is below the max wattage of the amp for the given impedance levels. Operating your amp outside of this max range may damage the speakers.


What size of room is the Audiolab 6000A MKII Amplifier good for?

An essential deciding factor is the size of the room in which you intend to employ the Audiolab 6000A MKII amplifier. Here, taking into account its maximum power parameters, we analyzed its applicability to various size environments:

Listening Environment Suitability
Near-fieldAverage
Small RoomGood
Mid-size RoomAverage
Large RoomPoor
Very Large RoomBad

Inputs and Outputs

Besides the performance specs of the Audiolab 6000A MKII, the next important feature set that you have to evaluate is the input and output selections that it offers. Audiolab 6000A MKII has total of 3 Analog inputs including 1 Phono Input (MM).

Audiolab 6000A MKII Back View
Audiolab 6000A MKII Back View (Click the image for the larger version)

Inputs
  • Total Number of Analog Inputs: 3
  • Phono Input
  • 2 Optical Digital Input
  • 2 Coaxial Digital Input

Audiolab 6000A MKII connection
Audiolab 6000A MKII Connections

Outputs
  • Stereo RCA Preamp Outputs
  • Pre-out/Main-in Loop
  • 1/4 Headphone Output

Bluetooth Connectivity

Audiolab 6000A MKII features built-in Bluetooth 5.1 for wireless music streaming from your Bluetooth-enabled devices such as Apple iPod/iPhone/iPad, Android smartphone/tablet, Windows PC, Mac computers/laptops.

Among the amps in the same price range, these are the 5 amps that have Bluetooth Connectivity:

  • Rotel A12 MKII - MSRP 1100$ - Compare w/ 6000A MKII
  • Audiolab 6000A - MSRP 899$ - Compare w/ 6000A MKII
  • NAD C 389 - MSRP 1499$ - Compare w/ 6000A MKII
  • Cambridge Audio CXA81 - MSRP 1299$ - Compare w/ 6000A MKII
  • Cambridge Audio CXA61 - MSRP 999$ - Compare w/ 6000A MKII

Audiolab 6000A MKII supports the following Bluetooth Codecs when used with supported devices:

  • aptX HD
  • aptX

Phono Input

Audiolab 6000A MKII features one Phono Input which is compatible with MM (Moving Magnet) type of phono cartridges, you can connect your turntable with MM cartridges directly to this amp without the need for a phono preamp. If you are using an MC cartridge on your turntable, you need to use a phono preamp that has MC phono stage such as the Cambridge Duo or the iFi ZEN Phono.

Subwoofer Output

Audiolab 6000A MKII has Stereo RCA preamp outputs which can be used to connect to a powered subwoofer via an RCA cable ( as long as your sub supports this connection).
Check our Powered Subwoofers page to find a subwoofer that will work with Audiolab 6000A MKII amp and your speakers.

Audiolab 6000A MKII Antennas
Audiolab 6000A MKII Antennas

DAC and Digital Music

The Audiolab 6000A MKII's built-in DAC allows the connection of digital sources directly, eliminating the need for an external DAC. The DAC chip that is used in the 6000A MKII is the ESS Sabre ES9038Q2M, and supports resolutions up to 24-bit, 192KHZ.

Audiolab 6000A MKII External Dimensions and Weight

Audiolab 6000A MKII has external dimensions of (H x W x D) 3-1/8inch x 17-9/16inch x 14-1/16inch (65 x 444 x 299mm ). The unit weighs 7.80kg / 17.2lbs.

Base Surface Area
Base surface area of an integrated amplifier may become an important decision factor when the space in your room or desk is limited. The base area of the Audiolab 6000A MKII is approximately 1327.6cm2 / 205.8inch2.

  • Width: 444.0mm (17-9/16")
  • Height: 65.0mm (3-1/8")
  • Depth: 299.0mm (14-1/16")
  • Weight: 7.80 kg (17.19lbs)
  • Base Surface Area: ~1327.6cm2 / 205.8inch2
  • Volume: ~8.6 liter / 2.3 gallon

Available colors

Audiolab 6000A MKII is available in Black and Silver color options.

User's Manual

For more information about how to setup, use and maintain the Audiolab 6000A MKII, use the direct link below to download the official manual document:
Download User Manual for Audiolab 6000A MKII

Official Product Page

Official manufacturer's product page for the Audiolab 6000A MKII Integrated Amplifier can be found below:
Official Product Page for Audiolab 6000A MKII

Warranty

2 Years of parts warranty and 2 Years of labor warranty is generally provided for the Audiolab 6000A MKII by the manufacturer.

Audiolab 6000A MKII  Lifestyle
Audiolab 6000A MKII Lifestyle

Audiolab 6000A MKII Detailed Specifications

General
Brand Audiolab
Full Model Name Audiolab 6000A MKII
Amplifier Type Integrated Amplifier
Amp Class Class A/B
Performance
Watts RMS per Channel into 8-ohms 50 watts
Watts RMS per Channel into 6-ohms N/A
Watts RMS per Channel into 4-ohms 75 watts
Frequency Bandwidth 20-20k
THD 0.0004%
Minimum Impedance 4
Signal to Noise Ratio 110 dB
Digital Music
Built-in DAC Yes
DAC Specs ESS Sabre ES9038Q2M
Bluetooth Yes
WiFi 802.11ac
Ecosystem
Apple AirPlay No
Apple AirPlay2 No
DTS Play-Fi Yes
Chromecast built-in No
Roon No
HEOS No
BluOS No

CONNECTIONS
Total Analog Inputs 3
Phono Input Yes
Optical Digital Inputs 2
Coaxial Digital Inputs 2
USB Input Firmware only
Preamp Outputs Stereo RCA
Pre-out / Main-in Loop Yes
Headphone Output 1/4
Removable Power Cord IEC 2-prong
PHYSICAL SPECS
Height 65.0mm (3-1/8")
Width 444.0mm (17-9/16")
Depth 299.0mm (14-1/16")
Weight 7.80 kg (17.19lbs)
Available Colors Black,Silver
OTHER
Parts Warranty 2 Years
Labor Warranty 2 Years
Audiolab 6000A MKII Alternatives in No Streaming Amplifiers
Model Watts RMS (8-ohms) Minimum Impedance Built-in DAC Phono Stage
Audiolab 7000A
Compare
70 watts4-ohmsYesMM
Audiolab 6000A
Compare
50 watts4-ohmsYesMM
Audiolab 6000A Play
Compare
50 watts4-ohmsYesMM
Audiolab 8300A
Compare
75 watts4-ohmsNoMM
Audiolab 9000A
Compare
100 watts4-ohmsYesMM
Audiolab Omnia
Compare
50 watts4-ohmsYesMM
Cambridge Audio CXA81
Compare
80 watts4-ohmsYesNo
NAD C 389
Compare
130 watts4-ohmsYesMM
Latest Amplifiers
Audiolab 8300A
Audiolab 8300A
75 watts into 8-ohms
Audiolab 6000A MKII
Audiolab 6000A MKII
50 watts into 8-ohms
WiiM Amp Pro
WiiM Amp Pro
60 watts into 8-ohms
Cambridge Audio CXA81 Mk II
Cambridge Audio CXA81 Mk II
80 watts into 8-ohms
Cambridge Audio EXA100
Cambridge Audio EXA100
100 watts into 8-ohms
WiiM Vibelink
WiiM Vibelink
100 watts into 8-ohms
Naim Uniti Nova Power Edition
Naim Uniti Nova Power Edition
150 watts into 8-ohms
WiiM Amp
WiiM Amp
60 watts into 8-ohms

Most Popular Amplifiers
Audiolab 7000A
Audiolab 7000A
70 watts into 8-ohms
Yamaha A-S801
Yamaha A-S801
100 watts into 8-ohms
Denon PMA-900HNE
Denon PMA-900HNE
50 watts into 8-ohms
Yamaha A-S301
Yamaha A-S301
60 watts into 8-ohms
Denon PMA-1700NE
Denon PMA-1700NE
70 watts into 8-ohms
Rotel A14 MKII
Rotel A14 MKII
80 watts into 8-ohms
Yamaha A-S501
Yamaha A-S501
85 watts into 8-ohms
Rotel Diamond Series RA-6000
Rotel Diamond Series RA-6000
200 watts into 8-ohms
Rotel A12 MKII
Rotel A12 MKII
60 watts into 8-ohms
Audiolab 6000A
Audiolab 6000A
50 watts into 8-ohms

Copyright © 2025 by SpeakerDecision
About Privacy Contact US Camera Decision