No single best amplifier here. What decides it is what you have to drive, what you need to plug in, and how much of the system you want in one box.
| Area | Better | Why |
|---|
| Power | evenly matched | Effectively the same output - 50W against 60W into 8 ohms is under 1dB, which is not an audible difference in loudness. |
| Noise floor | A | Audiolab 6000A MKII is the quieter design on paper - 110dB against 100dB. Audible mainly with sensitive speakers in a quiet room. |
| Built-in DAC | B | Both decode on board. Rotel A12 MKII goes higher - 384kHz against 192kHz. Very few recordings exist above 192kHz, so treat this as headroom, not as sound quality. |
| Analogue inputs | B | Rotel A12 MKII takes more analogue sources - 4 against 3. |
| Room to grow | A | Only Audiolab 6000A MKII offers a pre-out/main-in loop - which decides whether you can add a subwoofer or a power amplifier later without replacing the box. |
| Shelf space | depends | Audiolab 6000A MKII takes up about 19% less shelf area (1328cm² against 1633cm²), and it is 79mm shallower, which is the measurement that decides whether a rack door shuts. |
| Price | evenly matched | Priced within a few per cent of each other. |
A Audiolab 6000A MKII B Rotel A12 MKII
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both amplifiers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Neither runs away with it - they trade advantages. Let the "depends" rows and the speakers you already own settle it.
What a spec sheet cannot show: how either sounds with your speakers, how the controls feel day to day, and what the app is like to live with - which is where most all-in-one amplifiers are actually won or lost. Power figures are the manufacturers' own and are not measured to a common standard, so treat small differences as noise. If you can hear both, that will tell you more than any row above.