The PM6007 is an integrated amplifier with built-in DAC by Marantz that delivers 45 watts x 2 channels into 8 ohms and 60 watts x 2 channels into 4 ohms. It was released in August 2020. It is a 2-channel design using a Class A/B output stage. A minimum impedance of 4 ohms makes it compatible with a wide range of loudspeakers. It has a built-in DAC (AK4490 24-bit/192kHz), so you can play digital sources directly with no separate DAC unit needed. It also has a phono input, so a turntable can connect straight to it. The Marantz PM6007 has an MSRP of $899.
There are 10 Marantz amplifiers in our database. Below you can see the main specs of these amps.
Marantz Integrated Amplifier Series
Performance Specs
One of the most important factors when deciding on an integrated amplifier is its power ratings and compatibility with your speaker's impedance requirements. The Marantz PM6007 is rated at 45 watts RMS into 8-ohms. Marantz provides this wattage at a THD (Total Harmonic Distortion) of 0.08% which is an important indicator of distortion at the given values (lower THD is better).
Here are the main highlights of its performance specs:
- 45 watts into 8-ohms (20 Hz-20 kHz) at 0.08%
- 60 watts into 4-ohms
- 4-ohms Min Impedance (allows compatibility with a wide range of loudspeakers)
- 102dB Signal to Noise Ratio
How loud will 45 watts actually play in your room? →
Wiring more than one pair of speakers to it? Check the load first →
Which speakers suit the Marantz PM6007?
45 W into 8 ohms, 60 W into 4, rated down to 4 ohms.
We rank every passive speaker we cover against it on power, impedance safety and current
delivery.
Need more power?
Marantz PM6007 is rated at 45 watts into 8 ohms, which puts it in our Up to 60 watts band. The next band up is 61 to 90 watts, which is worth about 3.9dB more output. That is a real difference in headroom on peaks, and a modest one in how loud the system plays - power and loudness are not the same thing.
Before buying watts, check what your speakers actually need: the amp and speaker matcher works it out from their sensitivity, impedance and your room.
When pairing the Marantz PM6007 with a passive Bookshelf (Stand mount) or Passive Floor Standing (Tower) speaker, you have to check if their Max Power Range is below the max wattage of the amp for the given impedance levels.
Operating your amp outside of this max range may damage the speakers.
Marantz PM6007 Amplifier
What size of room is the Marantz PM6007 Amplifier good for?
An essential deciding factor is the size of the room in which you intend to employ the Marantz PM6007 amplifier. Here, taking into account its maximum power parameters, we analyzed its applicability to various size environments:
| Listening Environment |
Suitability |
| Near-field | Average |
| Small Room | Good |
| Mid-size Room | Average |
| Large Room | Poor |
| Very Large Room | Bad |
Inputs and Outputs
Besides the performance specs of the Marantz PM6007, the next important feature set that you have to evaluate is the input and output selections that it offers.
Marantz PM6007 has total of 4 Analog inputs including 1 Phono Input (MM).
Marantz PM6007 Back View (Click the image for the larger version)
Inputs
- Total Number of Analog Inputs: 4
- Phono Input
- 2 Optical Digital Input
- 1 Coaxial Digital Input
Outputs
- Speaker Outputs
- Sub Preamp Outputs
- 1/4 Headphone Output
- Subwoofer Output
Bluetooth Connectivity
Marantz PM6007 doesn't have bluetooth connectivity feature. In order to stream your music via bluetooth, the easiest way is to connect an external bluetooth receiver to your Marantz PM6007. Two bluetooth receivers that we recommend are the
iFi Zen Blue V2 and the
Audioengine B1.
Among the amps in the same price range, these are the 5 amps that have Bluetooth Connectivity:
Phono Input
Marantz PM6007 features one Phono Input which is compatible with
MM (Moving Magnet) type of phono cartridges, you can connect your turntable with MM cartridges directly to this amp without the need for a phono preamp. If you are using an MC cartridge on your turntable, you need to use a phono preamp that has MC phono stage such as the
Cambridge Duo or the
iFi ZEN Phono.
Subwoofer Output
Marantz PM6007 has a dedicated subwoofer output which can be used to connect it directly to a powered subwoofer via an LFE(Low Frequency Effects) cable.
Check our
Powered Subwoofers page to find a subwoofer that will work with Marantz PM6007 amp and your speakers.
DAC and Digital Music
The Marantz PM6007's built-in DAC allows the connection of digital sources directly, eliminating the need for an external DAC. The DAC chip that is used in the PM6007 is the
AK4490 24-bit/192kHz.
Marantz PM6007 Handheld Remote
Marantz PM6007 External Dimensions and Weight
Marantz PM6007 has external dimensions of (H x W x D) 4-1/8inch x 17-3/8inch x 15-11/16inch (105.0mm x 442.0mm x 399.0mm ). The unit weighs
7.59 kg (16.7 lbs).
Base Surface Area
Base surface area of an integrated amplifier may become an important decision factor when the space in your room or desk is limited.
The base area of the Marantz PM6007 is approximately 1763.6cm2 / 273.4inch2.
- Width: 442.0mm (17-3/8")
- Height: 105.0mm (4-1/8")
- Depth: 399.0mm (15-11/16")
- Weight: 7.59 kg (16.7 lbs)
- Base Surface Area: ~1763.6cm2 / 273.4inch2
- Volume: ~18.5 liter / 4.9 gallon
What's in the Box of Marantz PM6007?
Here are the items that are included inside the box of PM6007:
- ntegrated Amplifier
- 68-inch AC power cord
- Remote control (RC004PMCD)
- 2 AAA batteries
- Owners Manual on CD-ROM
- Quick Start Guide
- Safety Instructions
- Warranty Information
Official Product Page
Official manufacturer's product page for the Marantz PM6007 Integrated Amplifier can be found below:
Official Product Page for Marantz PM6007
Warranty
3 Years of parts warranty and 3 Years of labor warranty is generally provided for the Marantz PM6007 by the manufacturer.
Marantz PM6007 Lifestyle
| General |
| Brand |
Marantz |
| Full Model Name |
Marantz PM6007 |
| Release Date |
August 2020 |
| Amplifier Type |
Integrated Amplifier |
| Number of Channels |
2 |
| Amp Class |
Class A/B |
| Amplifier Technology |
Solid State |
| Performance |
| Watts RMS per Channel into 8-ohms |
45 watts |
| Watts RMS per Channel into 6-ohms |
N/A |
| Watts RMS per Channel into 4-ohms |
60 watts |
| Frequency Bandwidth |
20 Hz-20 kHz |
| Damping Factor |
100 |
| THD |
0.08% |
| Minimum Impedance |
4 |
| Signal to Noise Ratio |
102 dB |
| Digital Music |
| Built-in DAC |
Yes |
| DAC Specs |
AK4490 24-bit/192kHz |
| Bluetooth |
No |
| WiFi |
|
| Ecosystem |
| Apple AirPlay |
No |
| Apple AirPlay2 |
No |
| DTS Play-Fi |
No |
| Chromecast built-in |
No |
| Roon |
No |
| HEOS |
No |
| BluOS |
No |
| CONNECTIONS |
| Total Analog Inputs |
4 |
| Phono Input |
Yes |
| Optical Digital Inputs |
2 |
| Coaxial Digital Inputs |
1 |
| USB Input |
No |
| Preamp Outputs |
Sub |
| Pre-out / Main-in Loop |
No |
| Headphone Output |
1/4 |
| Subwoofer Output |
Yes |
| Removable Power Cord |
IEC 2-prong |
| PHYSICAL SPECS |
| Height |
105.0mm (4-1/8") |
| Width |
442.0mm (17-3/8") |
| Depth |
399.0mm (15-11/16") |
| Weight |
7.59 kg (16.7 lbs) |
| OTHER |
| Tone Controls |
Yes |
| Parts Warranty |
3 Years |
| Labor Warranty |
3 Years |