The A11 Tribute is an integrated amplifier by Rotel that delivers 50 watts x 2 channels into 8 ohms. It was released in September 2020. A minimum impedance of 4 ohms makes it compatible with a wide range of loudspeakers. It also has a phono input, so a turntable can connect straight to it. The Rotel A11 Tribute has an MSRP of $800.
Rotel A11 Tribute Amplifier Internal View
Rotel later replaced the Rotel A11 Tribute with the Rotel A11 MKII. Follow the link to read our in-depth comparison of these speakers:
Compare Rotel A11 Tribute vs Rotel A11 MKII
There are 10 Rotel amplifiers in our database. Below you can see the main specs of these amps.
Rotel Integrated Amplifier Series
Performance Specs
One of the most important factors when deciding on an integrated amplifier is its power ratings and compatibility with your speaker's impedance requirements. The Rotel A11 Tribute is rated at 50 watts RMS into 8-ohms. Rotel provides this wattage at a THD (Total Harmonic Distortion) of 0.03% which is an important indicator of distortion at the given values (lower THD is better).
Here are the main highlights of its performance specs:
- 50 watts into 8-ohms (20 Hz-20 kHz) at 0.03%
- 4-ohms Min Impedance (allows compatibility with a wide range of loudspeakers)
- 100dB Signal to Noise Ratio
How loud will 50 watts actually play in your room? →
Wiring more than one pair of speakers to it? Check the load first →
Which speakers suit the Rotel A11 Tribute?
50 W into 8 ohms, rated down to 4 ohms.
We rank every passive speaker we cover against it on power, impedance safety and current
delivery.
Need more power?
Rotel A11 Tribute is rated at 50 watts into 8 ohms, which puts it in our Up to 60 watts band. The next band up is 61 to 90 watts, which is worth about 3.9dB more output. That is a real difference in headroom on peaks, and a modest one in how loud the system plays - power and loudness are not the same thing.
Before buying watts, check what your speakers actually need: the amp and speaker matcher works it out from their sensitivity, impedance and your room.
When pairing the Rotel A11 Tribute with a passive Bookshelf (Stand mount) or Passive Floor Standing (Tower) speaker, you have to check if their Max Power Range is below the max wattage of the amp for the given impedance levels.
Operating your amp outside of this max range may damage the speakers.
What size of room is the Rotel A11 Tribute Amplifier good for?
An essential deciding factor is the size of the room in which you intend to employ the Rotel A11 Tribute amplifier. Here, taking into account its maximum power parameters, we analyzed its applicability to various size environments:
| Listening Environment |
Suitability |
| Near-field | Average |
| Small Room | Good |
| Mid-size Room | Average |
| Large Room | Poor |
| Very Large Room | Bad |
Inputs and Outputs
Besides the performance specs of the Rotel A11 Tribute, the next important feature set that you have to evaluate is the input and output selections that it offers.
Rotel A11 Tribute has total of 4 Analog inputs including 1 Phono Input (MM).
Rotel A11 Tribute Back View (Click the image for the larger version)
Inputs
- Total Number of Analog Inputs: 4
- Phono Input
Outputs
- Speaker Outputs (A/B switchable)
- Stereo RCA Preamp Outputs
- 3.5mm Headphone Output
Bluetooth Connectivity
Rotel A11 Tribute features built-in Bluetooth for wireless music streaming from your Bluetooth-enabled devices such as Apple iPod/iPhone/iPad, Android smartphone/tablet, Windows PC, Mac computers/laptops.
Among the amps in the same price range, these are the 5 amps that have Bluetooth Connectivity:
Rotel A11 Tribute supports the following Bluetooth Codecs when used with supported devices:
Phono Input
Rotel A11 Tribute features one Phono Input which is compatible with
MM (Moving Magnet) type of phono cartridges, you can connect your turntable with MM cartridges directly to this amp without the need for a phono preamp. If you are using an MC cartridge on your turntable, you need to use a phono preamp that has MC phono stage such as the
Cambridge Duo or the
iFi ZEN Phono.
Subwoofer Output
Rotel A11 Tribute has Stereo RCA preamp outputs which can be used to connect to a powered subwoofer via an RCA cable ( as long as your sub supports this connection).
Check our
Powered Subwoofers page to find a subwoofer that will work with Rotel A11 Tribute amp and your speakers.
Rotel A11 Tribute Pros and Cons
Drawn from the published figures on this page, not from listening.
- ✓50 watts per channel into 8 ohms.
- ✓Signal-to-noise ratio of 100dB, so the amplifier itself should be inaudible between tracks.
- ✓4 analogue inputs, enough for a full rack of sources.
- ✓Phono stage built in (MM), so a turntable needs no separate preamplifier.
- ✓Bluetooth (AptX,AAC,SBC) for playing straight from a phone.
- ✓Pre-outs (Stereo RCA) leave room to add a power amplifier or an active subwoofer later.
- ✓A and B speaker terminals, for a second pair or for bi-wiring.
- ✓Headphone output (3.5mm).
- ✓Has tone controls.
- ✓5-year parts warranty, longer than most of the market.
- ✓Detachable mains lead (IEC 2-prong).
- ✗Analogue inputs only - a TV, computer or CD transport needs an external DAC.
- ✗The phono stage is moving-magnet only; a moving-coil cartridge would need a step-up or an external stage.
Rotel A11 Tribute External Dimensions and Weight
Rotel A11 Tribute has external dimensions of (H x W x D) 3-5/8inch x 17inch x 14-13/16inch (93.0mm x 432.0mm x 377.0mm ). The unit weighs
6.86 kg (15.1 lbs).
Base Surface Area
Base surface area of an integrated amplifier may become an important decision factor when the space in your room or desk is limited.
The base area of the Rotel A11 Tribute is approximately 1628.6cm2 / 252.4inch2.
- Width: 432.0mm (17")
- Height: 93.0mm (3-5/8")
- Depth: 377.0mm (14-13/16")
- Weight: 6.86 kg (15.1 lbs)
- Base Surface Area: ~1628.6cm2 / 252.4inch2
- Volume: ~15.1 liter / 4.0 gallon
Available colors
Rotel A11 Tribute is available in Black and Silver color options.
What's in the Box of Rotel A11 Tribute?
Here are the items that are included inside the box of A11 Tribute:
- Stereo integrated amplifier
- 58-inch AC power cord
- Remote control (RR-AX1401)
- 2 AAA batteries
- Owners Manual on CD-ROM
- Warranty Information
- Important Safety Instructions
Official Product Page
Official manufacturer's product page for the Rotel A11 Tribute Integrated Amplifier can be found below:
Official Product Page for Rotel A11 Tribute
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided for the Rotel A11 Tribute by the manufacturer.
Related Videos
| General |
| Brand |
Rotel |
| Full Model Name |
Rotel A11 Tribute |
| Release Date |
September 2020 |
| Amplifier Type |
Integrated Amplifier |
| Amp Class |
Class A/B |
| Amplifier Technology |
Solid State |
| Performance |
| Watts RMS per Channel into 8-ohms |
50 watts |
| Watts RMS per Channel into 6-ohms |
N/A |
| Watts RMS per Channel into 4-ohms |
N/A |
| Frequency Bandwidth |
20 Hz-20 kHz |
| THD |
0.03% |
| Minimum Impedance |
4 |
| Signal to Noise Ratio |
100 dB |
| Digital Music |
| Built-in DAC |
No |
| DAC Specs |
Texas Instruments (TI) |
| Bluetooth |
Yes |
| WiFi |
|
| Ecosystem |
| Apple AirPlay |
No |
| Apple AirPlay2 |
No |
| DTS Play-Fi |
No |
| Chromecast built-in |
No |
| Roon |
No |
| HEOS |
No |
| BluOS |
No |
| CONNECTIONS |
| Total Analog Inputs |
4 |
| Phono Input |
Yes |
| Optical Digital Inputs |
No |
| Coaxial Digital Inputs |
No |
| USB Input |
No |
| Preamp Outputs |
Stereo RCA |
| Pre-out / Main-in Loop |
No |
| Headphone Output |
3.5mm |
| Removable Power Cord |
IEC 2-prong |
| PHYSICAL SPECS |
| Height |
93.0mm (3-5/8") |
| Width |
432.0mm (17") |
| Depth |
377.0mm (14-13/16") |
| Weight |
6.86 kg (15.1 lbs) |
| Available Colors |
Black,Silver |
| OTHER |
| Tone Controls |
Yes |
| Parts Warranty |
5 Years |
| Labor Warranty |
5 Years |