The A10 MKII is an integrated amplifier by Rotel that delivers 50 watts x 2 channels into 8 ohms. It was released in July 2023. It is a 2-channel design using a Class A/B output stage. It has a built-in DAC, so you can play digital sources directly with no separate DAC unit needed. It also has a phono input, so a turntable can connect straight to it. The Rotel A10 MKII has an MSRP of $599.
Rotel A10 MKII Amplifier Internal View
There are 10 Rotel amplifiers in our database. Below you can see the main specs of these amps.
Rotel Integrated Amplifier Series
Performance Specs
One of the most important factors when deciding on an integrated amplifier is its power ratings and compatibility with your speaker's impedance requirements. The Rotel A10 MKII is rated at 50 watts RMS into 8-ohms. Rotel provides this wattage at a THD (Total Harmonic Distortion) of 0.03% which is an important indicator of distortion at the given values (lower THD is better).
Here are the main highlights of its performance specs:
- 50 watts into 8-ohms (20 Hz-20 kHz) at 0.03%
- 90dB Signal to Noise Ratio
How loud will 50 watts actually play in your room? →
Wiring more than one pair of speakers to it? Check the load first →
Which speakers suit the Rotel A10 MKII?
50 W into 8 ohms, rated down to 8 ohms.
We rank every passive speaker we cover against it on power, impedance safety and current
delivery.
Need more power?
Rotel A10 MKII is rated at 50 watts into 8 ohms, which puts it in our Up to 60 watts band. The next band up is 61 to 90 watts, which is worth about 3.9dB more output. That is a real difference in headroom on peaks, and a modest one in how loud the system plays - power and loudness are not the same thing.
Before buying watts, check what your speakers actually need: the amp and speaker matcher works it out from their sensitivity, impedance and your room.
When pairing the Rotel A10 MKII with a passive Bookshelf (Stand mount) or Passive Floor Standing (Tower) speaker, you have to check if their Max Power Range is below the max wattage of the amp for the given impedance levels.
Operating your amp outside of this max range may damage the speakers.
What size of room is the Rotel A10 MKII Amplifier good for?
An essential deciding factor is the size of the room in which you intend to employ the Rotel A10 MKII amplifier. Here, taking into account its maximum power parameters, we analyzed its applicability to various size environments:
| Listening Environment |
Suitability |
| Near-field | Average |
| Small Room | Good |
| Mid-size Room | Average |
| Large Room | Poor |
| Very Large Room | Bad |
Inputs and Outputs
Besides the performance specs of the Rotel A10 MKII, the next important feature set that you have to evaluate is the input and output selections that it offers.
Rotel A10 MKII has total of 4 Analog inputs including 1 Phono Input (MM).
Rotel A10 MKII Back View (Click the image for the larger version)
Inputs
- Total Number of Analog Inputs: 4
- Phono Input
Outputs
- Speaker Outputs
- 3.5mm Headphone Output
Bluetooth Connectivity
Rotel A10 MKII doesn't have bluetooth connectivity feature. In order to stream your music via bluetooth, the easiest way is to connect an external bluetooth receiver to your Rotel A10 MKII. Two bluetooth receivers that we recommend are the
iFi Zen Blue V2 and the
Audioengine B1.
Among the amps in the same price range, these are the 5 amps that have Bluetooth Connectivity:
Phono Input
Rotel A10 MKII features one Phono Input which is compatible with
MM (Moving Magnet) type of phono cartridges, you can connect your turntable with MM cartridges directly to this amp without the need for a phono preamp. If you are using an MC cartridge on your turntable, you need to use a phono preamp that has MC phono stage such as the
Cambridge Duo or the
iFi ZEN Phono.
DAC and Digital Music
The Rotel A10 MKII's built-in DAC allows the connection of digital sources directly, eliminating the need for an external DAC.
Rotel A10 MKII Pros and Cons
Drawn from the published figures on this page, not from listening.
- ✓50 watts per channel into 8 ohms.
- ✓4 analogue inputs, enough for a full rack of sources.
- ✓Built-in DAC, so a TV, computer or streamer can connect digitally with nothing in between.
- ✓Phono stage built in (MM), so a turntable needs no separate preamplifier.
- ✓Headphone output (3.5mm).
- ✓Has tone controls.
- ✓5-year parts warranty, longer than most of the market.
- ✓Detachable mains lead (IEC 2-prong).
- ✗Rated only down to 8 ohms - a 4 ohm speaker, or one that dips below that, is outside what the maker specifies.
- ✗The phono stage is moving-magnet only; a moving-coil cartridge would need a step-up or an external stage.
- ✗No Bluetooth and no network streaming - everything arrives over a cable.
Rotel A10 MKII External Dimensions and Weight
Rotel A10 MKII has external dimensions of (H x W x D) 2-7/8inch x 17inch x 14-7/8inch (74.0mm x 432.0mm x 378.0mm ). The unit weighs
6.59 kg (14.5 lbs).
Base Surface Area
Base surface area of an integrated amplifier may become an important decision factor when the space in your room or desk is limited.
The base area of the Rotel A10 MKII is approximately 1633.0cm2 / 253.1inch2.
- Width: 432.0mm (17")
- Height: 74.0mm (2-7/8")
- Depth: 378.0mm (14-7/8")
- Weight: 6.59 kg (14.5 lbs)
- Base Surface Area: ~1633.0cm2 / 253.1inch2
- Volume: ~12.1 liter / 3.2 gallon
Available colors
Rotel A10 MKII is available in Black and Silver color options.
What's in the Box of Rotel A10 MKII?
Here are the items that are included inside the box of A10 MKII:
- Stereo integrated amplifier
- 58-inch AC power cord
- Remote control (RR-AX1403)
- 2 -inchAAA-inch batteries
- Quick Installation Guide
- Onwer-feets Manual on USB thumbdrive
- Warranty/Registration Card
- Important Safety Instructions
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided for the Rotel A10 MKII by the manufacturer.
Rotel A10 MKII Lifestyle
| General |
| Brand |
Rotel |
| Full Model Name |
Rotel A10 MKII |
| Release Date |
July 2023 |
| Amplifier Type |
Integrated Amplifier |
| Number of Channels |
2 |
| Amp Class |
Class A/B |
| Amplifier Technology |
Solid State |
| Performance |
| Watts RMS per Channel into 8-ohms |
50 watts |
| Watts RMS per Channel into 6-ohms |
N/A |
| Watts RMS per Channel into 4-ohms |
N/A |
| Frequency Bandwidth |
20 Hz-20 kHz |
| THD |
0.03% |
| Minimum Impedance |
8 |
| Signal to Noise Ratio |
90 dB |
| Digital Music |
| Built-in DAC |
Yes |
| Bluetooth |
No |
| WiFi |
|
| Ecosystem |
| Apple AirPlay |
No |
| Apple AirPlay2 |
No |
| DTS Play-Fi |
No |
| Chromecast built-in |
No |
| Roon |
No |
| HEOS |
No |
| BluOS |
No |
| CONNECTIONS |
| Total Analog Inputs |
4 |
| Phono Input |
Yes |
| Optical Digital Inputs |
No |
| Coaxial Digital Inputs |
No |
| USB Input |
No |
| Preamp Outputs |
No |
| Pre-out / Main-in Loop |
No |
| Headphone Output |
3.5mm |
| Subwoofer Output |
Yes |
| Removable Power Cord |
IEC 2-prong |
| PHYSICAL SPECS |
| Height |
74.0mm (2-7/8") |
| Width |
432.0mm (17") |
| Depth |
378.0mm (14-7/8") |
| Weight |
6.59 kg (14.5 lbs) |
| Available Colors |
Black,Silver |
| OTHER |
| Tone Controls |
Yes |
| Parts Warranty |
5 Years |
| Labor Warranty |
5 Years |