The A8 is an integrated amplifier by Rotel that delivers 30 watts x 2 channels into 8 ohms and 40 watts x 2 channels into 4 ohms. It was released in July 2024. It is a 2-channel design using a Class A/B output stage. It has a built-in DAC, so you can play digital sources directly with no separate DAC unit needed. It also has a phono input, so a turntable can connect straight to it. The Rotel A8 has an MSRP of $499.
There are 10 Rotel amplifiers in our database. Below you can see the main specs of these amps.
Rotel Integrated Amplifier Series
Performance Specs
One of the most important factors when deciding on an integrated amplifier is its power ratings and compatibility with your speaker's impedance requirements. The Rotel A8 is rated at 30 watts RMS into 8-ohms. Rotel provides this wattage at a THD (Total Harmonic Distortion) of 0.03% which is an important indicator of distortion at the given values (lower THD is better).
Here are the main highlights of its performance specs:
- 30 watts into 8-ohms (20 Hz-20 kHz) at 0.03%
- 40 watts into 4-ohms
- 90dB Signal to Noise Ratio
How loud will 30 watts actually play in your room? →
Wiring more than one pair of speakers to it? Check the load first →
Which speakers suit the Rotel A8?
30 W into 8 ohms, 40 W into 4, rated down to 8 ohms.
We rank every passive speaker we cover against it on power, impedance safety and current
delivery.
Need more power?
Rotel A8 is rated at 30 watts into 8 ohms, which puts it in our Up to 60 watts band. The next band up is 61 to 90 watts, which is worth about 3.9dB more output. That is a real difference in headroom on peaks, and a modest one in how loud the system plays - power and loudness are not the same thing.
Before buying watts, check what your speakers actually need: the amp and speaker matcher works it out from their sensitivity, impedance and your room.
When pairing the Rotel A8 with a passive Bookshelf (Stand mount) or Passive Floor Standing (Tower) speaker, you have to check if their Max Power Range is below the max wattage of the amp for the given impedance levels.
Operating your amp outside of this max range may damage the speakers.
Inputs and Outputs
Besides the performance specs of the Rotel A8, the next important feature set that you have to evaluate is the input and output selections that it offers.
Inputs
Outputs
- Speaker Outputs
- 3.5mm Headphone Output
DAC and Digital Music
The Rotel A8's built-in DAC allows the connection of digital sources directly, eliminating the need for an external DAC.
Rotel A8 Pros and Cons
Drawn from the published figures on this page, not from listening.
- ✓30 watts per channel into 8 ohms, 40 into 4.
- ✓Built-in DAC, so a TV, computer or streamer can connect digitally with nothing in between.
- ✓Phono stage built in, so a turntable needs no separate preamplifier.
- ✓Headphone output (3.5mm).
- ✓5-year parts warranty, longer than most of the market.
- ✗Rated only down to 8 ohms - a 4 ohm speaker, or one that dips below that, is outside what the maker specifies.
- ✗No Bluetooth and no network streaming - everything arrives over a cable.
Rotel A8 External Dimensions and Weight
Rotel A8 has external dimensions of (H x W x D) 2-7/8inch x 17inch x 13-7/8inch (74.0mm x 432.0mm x 353.0mm ). The unit weighs
5.82 kg (12.8 lbs).
Base Surface Area
Base surface area of an integrated amplifier may become an important decision factor when the space in your room or desk is limited.
The base area of the Rotel A8 is approximately 1525.0cm2 / 236.4inch2.
- Width: 432.0mm (17")
- Height: 74.0mm (2-7/8")
- Depth: 353.0mm (13-7/8")
- Weight: 5.82 kg (12.8 lbs)
- Base Surface Area: ~1525.0cm2 / 236.4inch2
- Volume: ~11.3 liter / 3.0 gallon
What's in the Box of Rotel A8?
Here are the items that are included inside the box of A8:
- Stereo integrated amplifier
- Remote control (RR-AX1403)
- 2 -inchAAA-inch batteries
- Quick Installation Guide
- Warranty/Registration Card
- Important Safety Instructions
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided for the Rotel A8 by the manufacturer.
| General |
| Brand |
Rotel |
| Full Model Name |
Rotel A8 |
| Release Date |
July 2024 |
| Amplifier Type |
Integrated Amplifier |
| Number of Channels |
2 |
| Amp Class |
Class A/B |
| Amplifier Technology |
Solid State |
| Performance |
| Watts RMS per Channel into 8-ohms |
30 watts |
| Watts RMS per Channel into 6-ohms |
N/A |
| Watts RMS per Channel into 4-ohms |
40 watts |
| Frequency Bandwidth |
20 Hz-20 kHz |
| THD |
0.03% |
| Minimum Impedance |
8 |
| Signal to Noise Ratio |
90 dB |
| Digital Music |
| Built-in DAC |
Yes |
| Bluetooth |
|
| WiFi |
|
| Ecosystem |
| Apple AirPlay |
No |
| Apple AirPlay2 |
No |
| DTS Play-Fi |
No |
| Chromecast built-in |
|
| Roon |
No |
| HEOS |
No |
| BluOS |
No |
| CONNECTIONS |
| Phono Input |
Yes |
| Optical Digital Inputs |
No |
| Coaxial Digital Inputs |
No |
| USB Input |
No |
| Preamp Outputs |
No |
| Pre-out / Main-in Loop |
No |
| Headphone Output |
3.5mm |
| Subwoofer Output |
Yes |
| Removable Power Cord |
No |
| PHYSICAL SPECS |
| Height |
74.0mm (2-7/8") |
| Width |
432.0mm (17") |
| Depth |
353.0mm (13-7/8") |
| Weight |
5.82 kg (12.8 lbs) |
| OTHER |
| Parts Warranty |
5 Years |
| Labor Warranty |
5 Years |