One is a streaming all-in-one and the other is an amplifier. Judge them on how many boxes you want and what you already own, not on the spec sheet alone.
| Area | Better | Why |
|---|
| Power | evenly matched | Effectively the same output - 100W against 120W into 8 ohms is under 1dB, which is not an audible difference in loudness. |
| Grip on hard loads | evenly matched | Both behave much the same into 4 ohms - output increases strongly (160W and 200W). |
| Noise floor | A | Audiolab 9000A is the quieter design on paper - 110dB against 100dB. Audible mainly with sensitive speakers in a quiet room. |
| Built-in DAC | B | Both decode on board. Rotel RA-1572 MKII goes higher - 384kHz against 192kHz. Very few recordings exist above 192kHz, so treat this as headroom, not as sound quality. |
| Streaming | evenly matched | Only Rotel RA-1572 MKII has Roon. Neither list is longer in a way that matters - check the one service you actually pay for. |
| Analogue inputs | B | Rotel RA-1572 MKII takes more analogue sources - 4 against 3. |
| Room to grow | A | Only Audiolab 9000A offers a pre-out/main-in loop - which decides whether you can add a subwoofer or a power amplifier later without replacing the box. |
| Price | B | Rotel RA-1572 MKII costs less - $2,100 against $2,999 at list. |
| Watts per dollar | B | Rotel RA-1572 MKII is the cheaper watt - about $18 per watt against $30. A blunt measure, and it says nothing about how either sounds, but it is the honest one for raw output. |
A Audiolab 9000A B Rotel RA-1572 MKII
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both amplifiers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Rotel RA-1572 MKII has the edge on paper, though not by much. The rows marked "depends" are more likely to decide this than the score is. Think about the whole system: the roughly $899 saved by taking the cheaper one would buy better speakers or a subwoofer, which does more for the sound than the difference between two competent amplifiers.
What a spec sheet cannot show: how either sounds with your speakers, how the controls feel day to day, and what the app is like to live with - which is where most all-in-one amplifiers are actually won or lost. Power figures are the manufacturers' own and are not measured to a common standard, so treat small differences as noise. If you can hear both, that will tell you more than any row above.