The PMA-3000NE is an integrated amplifier by Denon that delivers 80 watts x 2 channels into 8 ohms and 160 watts x 2 channels into 4 ohms. It was released in September 2024. It is a 2-channel design using a Class A/B output stage. A minimum impedance of 4 ohms makes it compatible with a wide range of loudspeakers. It has a built-in DAC, so you can play digital sources directly with no separate DAC unit needed. It also has a phono input, so a turntable can connect straight to it. The Denon PMA-3000NE has an MSRP of $3,799.
There are 7 Denon amplifiers in our database. Below you can see the main specs of these amps.
Denon Integrated Amplifier Series
Performance Specs
One of the most important factors when deciding on an integrated amplifier is its power ratings and compatibility with your speaker's impedance requirements. The Denon PMA-3000NE is rated at 80 watts RMS into 8-ohms. Denon provides this wattage at a THD (Total Harmonic Distortion) of 0.07% which is an important indicator of distortion at the given values (lower THD is better).
Here are the main highlights of its performance specs:
- 80 watts into 8-ohms (20 Hz-20 kHz) at 0.07%
- 160 watts into 4-ohms
- 4-ohms Min Impedance (allows compatibility with a wide range of loudspeakers)
- 110dB Signal to Noise Ratio
How loud will 80 watts actually play in your room? →
Wiring more than one pair of speakers to it? Check the load first →
Which speakers suit the Denon PMA-3000NE?
80 W into 8 ohms, 160 W into 4, rated down to 4 ohms.
We rank every passive speaker we cover against it on power, impedance safety and current
delivery.
Need more power?
Denon PMA-3000NE is rated at 80 watts into 8 ohms, which puts it in our 61 to 90 watts band. The next band up is 91 to 120 watts, which is worth about 1.5dB more output. That is a real difference in headroom on peaks, and a modest one in how loud the system plays - power and loudness are not the same thing.
Before buying watts, check what your speakers actually need: the amp and speaker matcher works it out from their sensitivity, impedance and your room. Plenty of systems are better served by the Up to 60 watts band and better speakers.
When pairing the Denon PMA-3000NE with a passive Bookshelf (Stand mount) or Passive Floor Standing (Tower) speaker, you have to check if their Max Power Range is below the max wattage of the amp for the given impedance levels.
Operating your amp outside of this max range may damage the speakers.
Inputs and Outputs
Besides the performance specs of the Denon PMA-3000NE, the next important feature set that you have to evaluate is the input and output selections that it offers.
Inputs
- Phono Input
- 3 Optical Digital Input
- 1 Coaxial Digital Input
- USB Input
Outputs
- Speaker Outputs
- Preamp Outputs
- 1/4 Headphone Output
DAC and Digital Music
The Denon PMA-3000NE's built-in DAC allows the connection of digital sources directly, eliminating the need for an external DAC.
Denon PMA-3000NE Pros and Cons
Drawn from the published figures on this page, not from listening.
- ✓Power nearly doubles into a harder load, 80 watts into 8 ohms rising to 160 into 4, which points to a power supply with real current in reserve.
- ✓Signal-to-noise ratio of 110dB, so the amplifier itself should be inaudible between tracks.
- ✓Built-in DAC, so a TV, computer or streamer can connect digitally with nothing in between.
- ✓Digital inputs cover 3 optical, 1 coaxial and USB.
- ✓Phono stage built in, so a turntable needs no separate preamplifier.
- ✓Pre-outs (Yes) leave room to add a power amplifier or an active subwoofer later.
- ✓Headphone output (1/4).
- ✓5-year parts warranty, longer than most of the market.
- ✓Detachable mains lead (IEC 2-prong).
- ✗No Bluetooth and no network streaming - everything arrives over a cable.
- ✗It weighs 25.1kg - check the shelf, and plan on a second pair of hands.
Denon PMA-3000NE External Dimensions and Weight
Denon PMA-3000NE has external dimensions of (H x W x D) 7-3/16inch x 17-1/8inch x 18-11/16inch (183.0mm x 435.0mm x 475.0mm ). The unit weighs
25.05 kg (55.1 lbs).
Base Surface Area
Base surface area of an integrated amplifier may become an important decision factor when the space in your room or desk is limited.
The base area of the Denon PMA-3000NE is approximately 2066.3cm2 / 320.3inch2.
- Width: 435.0mm (17-1/8")
- Height: 183.0mm (7-3/16")
- Depth: 475.0mm (18-11/16")
- Weight: 25.05 kg (55.1 lbs)
- Base Surface Area: ~2066.3cm2 / 320.3inch2
- Volume: ~37.8 liter / 10.0 gallon
What's in the Box of Denon PMA-3000NE?
Here are the items that are included inside the box of PMA-3000NE:
- Integrated amplifier
- 68-inch AC power cord
- Remote control (RC-1207)
- 2 -inchAAA-inch batteries
- Quick Start Guide
- Safety Instructions
- Warranty Information
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided for the Denon PMA-3000NE by the manufacturer.
| General |
| Brand |
Denon |
| Full Model Name |
Denon PMA-3000NE |
| Release Date |
September 2024 |
| Amplifier Type |
Integrated Amplifier |
| Number of Channels |
2 |
| Amp Class |
Class A/B |
| Amplifier Technology |
Solid State |
| Performance |
| Watts RMS per Channel into 8-ohms |
80 watts |
| Watts RMS per Channel into 6-ohms |
N/A |
| Watts RMS per Channel into 4-ohms |
160 watts |
| Frequency Bandwidth |
20 Hz-20 kHz |
| THD |
0.07% |
| Minimum Impedance |
4 |
| Signal to Noise Ratio |
110 dB |
| Digital Music |
| Built-in DAC |
Yes |
| Bluetooth |
|
| WiFi |
|
| Ecosystem |
| Apple AirPlay |
No |
| Apple AirPlay2 |
No |
| DTS Play-Fi |
No |
| Chromecast built-in |
|
| Roon |
No |
| HEOS |
No |
| BluOS |
No |
| CONNECTIONS |
| Phono Input |
Yes |
| Optical Digital Inputs |
3 |
| Coaxial Digital Inputs |
1 |
| USB Input |
Yes |
| Preamp Outputs |
Yes |
| Pre-out / Main-in Loop |
No |
| Headphone Output |
1/4 |
| Subwoofer Output |
Yes |
| Removable Power Cord |
IEC 2-prong |
| PHYSICAL SPECS |
| Height |
183.0mm (7-3/16") |
| Width |
435.0mm (17-1/8") |
| Depth |
475.0mm (18-11/16") |
| Weight |
25.05 kg (55.1 lbs) |
| OTHER |
| Parts Warranty |
5 Years |
| Labor Warranty |
5 Years |