The AMP-F2 is a stereo power amplifier by Eversolo that delivers 250 watts x 2 channels into 4 ohms at 1% THD+N, or 450 watts into 2 ohms bridged to mono. Eversolo publishes no 8 ohm rating. It was released in 2024. It is a 2-channel design using a Class D output stage. Bridged to mono it delivers 450 watts mono into 2 ohms, which is the usual way to use a pair of these on a demanding speaker. Speakers connect via binding posts. A minimum impedance of 2 ohms makes it compatible with a wide range of loudspeakers. The Eversolo AMP-F2 has an MSRP of $799.
There are 2 Eversolo amplifiers in our database. Below you can see the main specs of these amps.
Eversolo Power Amplifier Series
Performance Specs
One of the most important factors when deciding on an integrated amplifier is its power ratings and compatibility with your speaker's impedance requirements. The Eversolo AMP-F2 is rated at 250 watts RMS into 4-ohms.
Here are the main highlights of its performance specs:
Wiring more than one pair of speakers to it? Check the load first →
When pairing the Eversolo AMP-F2 with a passive Bookshelf (Stand mount) or Passive Floor Standing (Tower) speaker, you have to check if their Max Power Range is below the max wattage of the amp for the given impedance levels.
Operating your amp outside of this max range may damage the speakers.
Inputs and Outputs
Besides the performance specs of the Eversolo AMP-F2, the next important feature set that you have to evaluate is the input and output selections that it offers.
Eversolo AMP-F2 has total of 2 Analog inputs .
Inputs
- Total Number of Analog Inputs: 2
Outputs
Bluetooth Connectivity
Eversolo AMP-F2 doesn't have bluetooth connectivity feature. In order to stream your music via bluetooth, the easiest way is to connect an external bluetooth receiver to your Eversolo AMP-F2. Two bluetooth receivers that we recommend are the
iFi Zen Blue V2 and the
Audioengine B1.
Among the amps in the same price range, these are the 5 amps that have Bluetooth Connectivity:
Phono Input
Eversolo AMP-F2 doesn't have a phono input so in order to play your vinyl albums, Eversolo AMP-F2 has to be paired with a Phono Preamp that is MM (Moving Magnet) or/and MC (Moving COil) depending on your cartridge type.
Balanced connections
Eversolo AMP-F2 has a balanced XLR input. A balanced cable carries the signal twice, on two conductors of opposite polarity. Interference picked up along the way lands on both equally and cancels when the two are recombined at the far end, so the longer the cable run and the noisier the surroundings, the more the connection is worth. Whether a balanced connection also yields more power depends on how the amplifier is built inside - some are balanced end to end, others convert to single-ended internally and deliver the same power either way, so it is worth reading the maker's own wording rather than assuming.
Eversolo AMP-F2 Pros and Cons
Drawn from the published figures on this page, not from listening.
- ✓Rated down to 2 ohms, so even a speaker with a punishing impedance dip is within its brief.
- ✓Class D output stage, so it runs cool and wastes little power as heat - which is how it fits in a small case.
- ✓Can be bridged to mono, so a pair can be used as two larger monoblocks.
- ✓Balanced XLR inputs, worth having on a long cable run.
- ✓At 270mm wide it fits where a full-size component will not.
- ✗A power amplifier has no volume control and no input selection - it needs a preamplifier, or a source with a variable output, in front of it.
Eversolo AMP-F2 External Dimensions and Weight
Eversolo AMP-F2 has external dimensions of (H x W x D) 1-15/16 x 10-5/8 x 7-3/8 inch (50 x 270 x 187 mm ).
Base Surface Area
Base surface area of an integrated amplifier may become an important decision factor when the space in your room or desk is limited.
The base area of the Eversolo AMP-F2 is approximately 504.9cm2 / 78.3inch2.
- Width: 270.0mm (10-5/8")
- Height: 50.0mm (1-15/16")
- Depth: 187.0mm (7-3/8")
- Weight: —
- Base Surface Area: ~504.9cm2 / 78.3inch2
- Volume: ~2.5 liter / 0.7 gallon
Available colors
Eversolo AMP-F2 is available in Black and Silver color options.
| General |
| Brand |
Eversolo |
| Full Model Name |
Eversolo AMP-F2 |
| Release Date |
2024 |
| Amplifier Type |
Power Amplifier |
| Number of Channels |
2 |
| Amp Class |
Class D |
| Amplifier Technology |
Solid State |
| Performance |
| Watts RMS per Channel into 8-ohms |
N/A |
| Watts RMS per Channel into 6-ohms |
N/A |
| Watts RMS per Channel into 4-ohms |
250 watts |
| Bridged Power per Channel |
Yes, 450 watts mono into 2 ohms |
| Frequency Bandwidth |
|
| THD |
|
| Minimum Impedance |
2 |
| Signal to Noise Ratio |
N/A |
| Digital Music |
| Built-in DAC |
No |
| Bluetooth |
No |
| WiFi |
No |
| CONNECTIONS |
| Total Analog Inputs |
2 |
| Phono Input |
No |
| Headphone Output |
No |
| Removable Power Cord |
|
| Speaker Connectors |
Binding posts |
| PHYSICAL SPECS |
| Height |
50.0mm (1-15/16") |
| Width |
270.0mm (10-5/8") |
| Depth |
187.0mm (7-3/8") |
| Weight |
— |
| Available Colors |
Black,Silver |
| OTHER |
| Parts Warranty |
|
| Labor Warranty |
|
How much power does the Eversolo AMP-F2 have?
The Eversolo AMP-F2 delivers 250 watts x 2 channels into 4 ohms at 1% THD+N, or 450 watts into 2 ohms bridged to mono. Eversolo publishes no 8 ohm rating.
Does the Eversolo AMP-F2 use vacuum tubes?
No. The Eversolo AMP-F2 is a solid-state amplifier - there are no vacuum tubes in it.
What amplifier class is the Eversolo AMP-F2?
The Eversolo AMP-F2 uses a Class D amplifier design. Class D is a modern switching design that runs cool and wastes very little energy as heat, which is how makers fit high power into a compact, light chassis.
Does the Eversolo AMP-F2 have a built-in DAC?
No. The Eversolo AMP-F2 has no built-in DAC, so a digital source such as a streamer or CD transport needs its own converter, or you connect it over analogue.
Can I connect a turntable to the Eversolo AMP-F2?
No. The Eversolo AMP-F2 has no phono input, so a turntable needs an external phono preamp (or a deck with one built in) before it can be connected.
Does the Eversolo AMP-F2 have Bluetooth?
No. The Eversolo AMP-F2 does not have Bluetooth built in; you would need an external Bluetooth receiver connected to one of its inputs.
Does the Eversolo AMP-F2 have a headphone output?
No. The Eversolo AMP-F2 does not have a headphone output, so headphone listening needs a separate headphone amplifier.
How much does the Eversolo AMP-F2 cost?
The Eversolo AMP-F2 has a manufacturer's list price (MSRP) of $799.
Was this amplifier review useful?
Tell us what is missing or wrong and we will fix it.