The AMP-F10 is a Stereo Power Amplifier by Eversolo that delivers 200 watts x 2 channels into 8 ohms, 320 watts x 2 into 4 ohms and 450 watts x 2 into 2 ohms. Bridged to mono it makes 650 watts into 8 ohms and 950 watts into 4 ohms. It was released in 2025. It is a 2-channel design using a Class A/B output stage. Bridged to mono it delivers Yes, 650 watts mono into 8 ohms, which is the usual way to use a pair of these on a demanding speaker. Speakers connect via Binding Post. Eversolo AMP-F10 has an MSRP of 2480$.
There are 2 Eversolo amplifiers in our database. Below you can see the main specs of these amps.
Eversolo Power Amplifier Series
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Performance Specs
One of the most important factors when deciding on an integrated amplifier is its power ratings and compatibility with your speaker's impedance requirements.The Eversolo AMP-F10 is rated at 200 watts RMS into 8-ohms. Eversolo provides this wattage at a THD (Total Harmonic Distortion) of 0.008% which is an important indicator of distortion at the given values (lower THD is better).
Here are the main highlights of its performance specs:
- 200 watts into 8-ohms (10 Hz-30 kHz) at 0.008%
- 320 watts into 4-ohms
- 113dB Signal to Noise Ratio
How loud will 200 watts actually play in your room? →
Wiring more than one pair of speakers to it? Check the load first →
Which speakers suit the Eversolo AMP-F10?
200 W into 8 ohms, 320 W into 4, rated down to 2 ohms.
We rank every passive speaker we cover against it on power, impedance safety and current
delivery.
When pairing the Eversolo AMP-F10 with a passive Bookshelf (Stand mount) or Passive Floor Standing (Tower) speaker, you have to check if their Max Power Range is below the max wattage of the amp for the given impedance levels.
Operating your amp outside of this max range may damage the speakers.
What size of room is the Eversolo AMP-F10 Amplifier good for?
An essential deciding factor is the size of the room in which you intend to employ the Eversolo AMP-F10 amplifier. Here, taking into account its maximum power parameters, we analyzed its applicability to various size environments:
| Listening Environment |
Suitability |
| Near-field | Are you nuts? |
| Small Room | Bad |
| Mid-size Room | Poor |
| Large Room | Good |
| Very Large Room | Good |
Inputs and Outputs
Besides the performance specs of the Eversolo AMP-F10, the next important feature set that you have to evaluate is the input and output selections that it offers.
Eversolo AMP-F10 has total of 2 Analog inputs .
Inputs
- Total Number of Analog Inputs: 2
Outputs
Bluetooth Connectivity
Eversolo AMP-F10 doesn't have bluetooth connectivity feature. In order to stream your music via bluetooth, the easiest way is to connect an external bluetooth receiver to your Eversolo AMP-F10. Two bluetooth receivers that we recommend are the
iFi Zen Blue V2 and the
Audioengine B1.
Among the amps in the same price range, these are the 5 amps that have Bluetooth Connectivity:
Phono Input
Eversolo AMP-F10 doesn't have a phono input so in order to play your vinyl albums, Eversolo AMP-F10 has to be paired with a Phono Preamp that is MM (Moving Magnet) or/and MC (Moving COil) depending on your cartridge type.
Eversolo AMP-F10 External Dimensions and Weight
Eversolo AMP-F10 has external dimensions of (H x W x D) 5-13/16 x 16-15/16 x 12-3/16 inch (147 x 430 x 310 mm ). The unit weighs
17.96 kg (39.6 lbs).
Base Surface Area
Base surface area of an integrated amplifier may become an important decision factor when the space in your room or desk is limited.
The base area of the Eversolo AMP-F10 is approximately 1333.0cm2 / 206.6inch2.
- Width: 430.0mm (16-15/16")
- Height: 147.0mm (5-13/16")
- Depth: 310.0mm (12-3/16")
- Weight: 17.96 kg (39.6 lbs)
- Base Surface Area: ~1333.0cm2 / 206.6inch2
- Volume: ~19.6 liter / 5.2 gallon
Available colors
Eversolo AMP-F10 is available in Black and Silver color options.
Official Product Page
Official manufacturer's product page for the Eversolo AMP-F10 Integrated Amplifier can be found below:
Official Product Page for Eversolo AMP-F10
| General |
| Brand |
Eversolo |
| Full Model Name |
Eversolo AMP-F10 |
| Release Date |
2025 |
| Amplifier Type |
Power Amplifier |
| Number of Channels |
2 |
| Amp Class |
Class A/B |
| Amplifier Technology |
Solid State |
| Performance |
| Watts RMS per Channel into 8-ohms |
200 watts |
| Watts RMS per Channel into 6-ohms |
N/A |
| Watts RMS per Channel into 4-ohms |
320 watts |
| Bridged Power per Channel |
Yes, 650 watts mono into 8 ohms |
| Frequency Bandwidth |
10 Hz-30 kHz |
| Damping Factor |
600 |
| THD |
0.008% |
| Minimum Impedance |
2 |
| Signal to Noise Ratio |
113 dB |
| Digital Music |
| Built-in DAC |
No |
| Bluetooth |
No |
| WiFi |
No |
| CONNECTIONS |
| Total Analog Inputs |
2 |
| Phono Input |
No |
| Headphone Output |
No |
| Removable Power Cord |
|
| Speaker Connectors |
Binding Post |
| Level Controls |
Switchable gain, 23 dB or 29 dB |
| PHYSICAL SPECS |
| Height |
147.0mm (5-13/16") |
| Width |
430.0mm (16-15/16") |
| Depth |
310.0mm (12-3/16") |
| Weight |
17.96 kg (39.6 lbs) |
| Available Colors |
Black,Silver |
| OTHER |
| Parts Warranty |
|
| Labor Warranty |
|
How much power does the Eversolo AMP-F10 have?
The Eversolo AMP-F10 delivers 200 watts x 2 channels into 8 ohms, 320 watts x 2 into 4 ohms and 450 watts x 2 into 2 ohms. Bridged to mono it makes 650 watts into 8 ohms and 950 watts into 4 ohms. It increases its output into 4 ohms, so it has some headroom for harder-to-drive speakers.
Does the Eversolo AMP-F10 use vacuum tubes?
No. The Eversolo AMP-F10 is a solid-state amplifier - there are no vacuum tubes in it.
What amplifier class is the Eversolo AMP-F10?
The Eversolo AMP-F10 uses a Class A/B amplifier design. Class A/B is the traditional linear design: it runs warmer and is less efficient than Class D, but it is long valued for its natural, low-distortion sound.
Does the Eversolo AMP-F10 have a built-in DAC?
No. The Eversolo AMP-F10 has no built-in DAC, so a digital source such as a streamer or CD transport needs its own converter, or you connect it over analogue.
Can I connect a turntable to the Eversolo AMP-F10?
No. The Eversolo AMP-F10 has no phono input, so a turntable needs an external phono preamp (or a deck with one built in) before it can be connected.
Does the Eversolo AMP-F10 have Bluetooth?
No. The Eversolo AMP-F10 does not have Bluetooth built in; you would need an external Bluetooth receiver connected to one of its inputs.
Does the Eversolo AMP-F10 have a headphone output?
No. The Eversolo AMP-F10 does not have a headphone output, so headphone listening needs a separate headphone amplifier.
How much does the Eversolo AMP-F10 cost?
The Eversolo AMP-F10 has a manufacturer's list price (MSRP) of $2,480.
Was this amplifier review useful?
Tell us what is missing or wrong and we will fix it.