ELAC Debut 2.0 B6.2 is a 2-way Passive Ported Bookshelf speaker designed by Andrew Jones for ELAC. It features a 1" Soft-Dome Tweeter and 1 x 6.5" Woven Aramid-Fiber Woofer. The speaker has a frequency range of 44-35k Hz and a sensitivity of 87 dB. ELAC Debut 2.0 B6.2 has an MSRP of 400$ per pair but can often be found around 240$ per pair.
What size of room is the ELAC Debut 2.0 B6.2 speaker good for?
The size of the room that you are planning to use the ELAC Debut 2.0 B6.2 is an important decision factor. Here we have evaluated its suitability to various size of environments considering its size and max power parameters:
|Very Large Room||Poor|
What are the speakers in ELAC's Debut 2.0 Series?
Debut 2.0 B6.2 is a member of ELAC's Debut 2.0 series of Passive speakers. Below you can see the main specs of these speakers.
ELAC Debut 2.0 Series Speakers
**This post contains affiliate links and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
What is the Frequency Response of the ELAC Debut 2.0 B6.2 speaker?
ELAC Debut 2.0 B6.2 has a Frequency response range of 44-35k Hz at ±3dB and Power Range of up to 120 watts. At a minimum frequency of 44 Hz, Debut 2.0 B6.2 will provide a deep bass that will probably satisfy majority of listeners, especially for music. Movie lovers and music listeners who likes to experience a full range response will still benefit from use of a subwooofer though.
To focus on the subwoofers that are in a similar price range with ELAC Debut 2.0 B6.2, check the Powered Subwoofers under $500. Alternatively, find the Full list of Powered Subwoofers regardless from the price.
Here we have a comparison of how Debut 2.0 B6.2's Low and High frequency values compared with the average, max and min Low and High frequency values in its class.
Among the speakers in our database with a max MSRP price of 500$ (Pair), these are the 4 Passive Bookshelf speakers that have the deeper bass levels than the ELAC Debut 2.0 B6.2's 44Hz:
What is the Crossover frequency of ELAC Debut 2.0 B6.2?
Crossover frequency of the Debut 2.0 B6.2 is set to 2200Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower frequency signals are sent to the woofer by the crossover component.
What is the Impedance and Sensitivity of the ELAC Debut 2.0 B6.2? Is it an easy to drive speaker?
ELAC Debut 2.0 B6.2's nominal impedance level is 6 ohms
and has a sensitivity of 87 dB
Nominal Impedance of 6 Ohms makes the ELAC Debut 2.0 B6.2 a relatively difficult to drive speaker compares to more frequently found 8 ohms speakers from nominal Impedance perspective.
With a sensitivity level of only 87 dB, ELAC Debut 2.0 B6.2 is a difficult to drive speaker from Sensitivity perspective, make sure to choose an amplifier with high output if you like listening your music at high volume levels. You may especially have hard time using Tube amplifiers which are traditionally very low power compared to Class A/B or Class D speakers.
Check our Integrated Amplifiers page to find an amplifier to pair with the ELAC Debut 2.0 B6.2.
Debut 2.0 B6.2 features 5-Way post type connectors. Bi-amping and Bi-wiring is not possible.
ELAC Debut 2.0 B6.2 External Dimensions and Weight
ELAC Debut 2.0 B6.2 has external dimensions of (Height x Width x Depth) 14.7 x 7.6 x 10.5inch (375.0 x 195.0 x 268.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of ELAC Debut 2.0 B6.2 is approximately 522.6cm2 / 81.0inch2.
To have a better perspective on the real life size of ELAC Debut 2.0 B6.2, let's compare it with a standard size Compact Disc which has a diameter of 4.7inch (120mm).
Here we place the ELAC Debut 2.0 B6.2 virtually next to a standard width amplifier and turntable on a BDI Octave Media Cabinet to get a better idea about the size.
The ELAC Debut 2.0 B6.2 weighs 7.40kg / 16.3lbs (per piece). Here is a comparison of how Debut 2.0 B6.2's weight compared with the average, max and min weights in its class.
All Bookshelf Speakers
Bookshelf Speakers under $500
Cabinet type and Materials
ELAC Debut 2.0 B6.2 has a Ported
type cabinet and MDF/Vinyl finish.
ELAC Debut 2.0 B6.2 is a front-firing port speaker which gives you more flexibility compared to rear firing speakers when you need to place it close against a wall or other surfaces.
ELAC Debut 2.0 B6.2 is available in Black.
Debut 2.0 B6.2 doesn't sport any built-in mounting bracket so you need an external structure to mount on walls.
Does the ELAC Debut 2.0 B6.2 come with a Grille?
Debut 2.0 B6.2 comes with magnetic grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound pass as clearly as possible. Since the included grille of the Debut 2.0 B6.2 magnetic type, it is very easy to put it on and off.
What's in the Box of ELAC Debut 2.0 B6.2?
Here are the items that are included inside the box of Debut 2.0 B6.2:
2 Bookshelf loudspeakers2 GrillesOperating Instructions
For more information about how to setup, use and maintain the ELAC Debut 2.0 B6.2, use the direct link below to download the official manual document:
Download User Manual for ELAC Debut 2.0 B6.2
Here is a link to download the official brochure for the ELAC Debut 2.0 B6.2 speaker:
Official Brochure for ELAC Debut 2.0 B6.2
Official Product Page
Official manufacturer's product page for the ELAC Debut 2.0 B6.2 speaker can be found below:
Official Product Page for ELAC Debut 2.0 B6.2
3 Years of parts warranty and 3 Years of labor warranty is generally provided by the manufacturer.