ELAC Debut 2.0 F5.2 is a 3-way Passive Bass Reflex Floor-standing speaker designed by Andrew Jones for ELAC. It features a 1" dome with wide-dispersion waveguide Tweeter, 1 x 5.25" Midrange and 2 x 5.25" Woven Aramid-Fiber Woofer. The speaker has a frequency range of 42-35k Hz and a sensitivity of 86 dB. ELAC Debut 2.0 F5.2 has an MSRP of 800$ per pair but can often be found around 480$ per pair.
Debut 2.0 F5.2 also gives the user optional Dolby Atmos capability by equipping the unit with upward-firing Dolby Atmos drivers.
Room Size Suitability
The size of the room where you plan to use the ELAC Debut 2.0 F5.2 is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Bad |
| Small Room | Poor |
| Mid-size Room | Good |
| Large Room | Good |
| Very Large Room | Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
ELAC later replaced Debut 2.0 F5.2 with Debut 3.0 DF53. Follow the link to read our in-depth comparison of these speakers:
Compare ELAC Debut 2.0 F5.2 vs ELAC Debut 3.0 DF53
ELAC's Debut 2.0 Series of Loudspeakers
Debut 2.0 F5.2 is a member of ELAC's Debut 2.0 series of Passive speakers. Below you can see the main specs of these speakers.
ELAC Debut 2.0 Series Speakers
ELAC Debut 2.0 Series Speakers
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the ELAC Debut 2.0 F5.2 Speaker
ELAC Debut 2.0 F5.2 has a Frequency response range of 42-35k Hz at ±3dB and Power Range of up to 140 watts. With a minimum frequency of 42 Hz, Debut 2.0 F5.2 delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
To focus on the subwoofers that are in a similar price range with ELAC Debut 2.0 F5.2, check out the Powered Subwoofers under $1000. Alternatively, find the Full list of Powered Subwoofers regardless of the price.
Here we have a comparison of how Debut 2.0 F5.2's Low and High frequency values compare with the average, max and min Low and High frequency values in its class.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
Among the speakers in our database with a max MSRP price of 1000$ (Pair), these are the 5 Passive Floor-standing speakers that have the deeper bass levels than the ELAC Debut 2.0 F5.2's 42Hz:
Crossover frequency of the ELAC Debut 2.0 F5.2?
Debut 2.0 F5.2 is a 3-way speaker and its crossover frequency between the woofer and the midrange set to 90Hz and the Crossover frequency between the midrange and the tweeter is set to 2200Hz.
Impedance and Sensitivity
ELAC Debut 2.0 F5.2's nominal impedance level is
6 ohms and has a sensitivity of
86 dB.
Sensitivity
Floor-standing Speakers
Nominal Impedance of the 6 Ohms makes the ELAC Debut 2.0 F5.2 a relatively difficult to drive speaker compared to more frequently found 8 ohms speakers from nominal Impedance perspective.
Sensitivity
With a sensitivity level of only 86 dB, ELAC Debut 2.0 F5.2 is a difficult to drive speaker from Sensitivity perspective, make sure to choose an amplifier with a high output if you like listening to your music at high volume levels. You may especially have a hard time using Tube amplifiers which are traditionally very low power compared to Class A/B or Class D amps.
Check the amplifiers that are in a similar price range to the ELAC Debut 2.0 F5.2:
Input Type
Debut 2.0 F5.2 features 5-Way post type connectors. Bi-amping and Bi-wiring are not possible.
ELAC Debut 2.0 F5.2 Back View
ELAC Debut 2.0 F5.2 External Dimensions and Weight
ELAC Debut 2.0 F5.2 has external dimensions of (Height x Width x Depth) 41-1/16 x 7-7/16 x 10-1/4inch (1043.0 x 189.0 x 261.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of ELAC Debut 2.0 F5.2 is approximately 493.3cm2 / 76.5inch2.
To get a better perspective on the real life size of ELAC Debut 2.0 F5.2, let's compare it with a standard size Compact Disc which has a diameter of 4.7inch (120mm).
ELAC Debut 2.0 F5.2 Speaker Size Compared to a Compact Disc
Here we place the ELAC Debut 2.0 F5.2 virtually next to a standard width amplifier and turntable on a media center to get a better idea about the size.
ELAC Debut 2.0 F5.2 Floor-standing Speaker next to a Media Stand
WeightThe ELAC Debut 2.0 F5.2 weighs 15.64kg / 34.4lbs per piece. Here is a comparison of how Debut 2.0 F5.2's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers under $1000
How does the ELAC Debut 2.0 F5.2 compare to the ELAC Debut 2.0 F6.2?
One of the natural alternative to the ELAC Debut 2.0 F5.2 is the Debut 2.0 F6.2 which is located one step higher in ELAC's Passive Floor-standing selection.
Here is a scaled size comparison of these two speakers to give you an idea how their external dimensions compare:
Comparison image of ELAC Debut 2.0 F5.2 and ELAC Debut 2.0 F6.2 Size and External Dimensions
Check the Detailed Comparison of ELAC Debut 2.0 F5.2 vs Debut 2.0 F6.2 for more details.
Cabinet type and Materials
ELAC Debut 2.0 F5.2 has a
Bass Reflex type cabinet and a MDF/Vinyl finish. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Speaker Feet
ELAC Debut 2.0 F5.2 comes with
4 Spikes (hex-nuts attached) which you can use to secure your loudspeaker on the surface that you are putting on. It is always recommended to use some kind of feet under all types of speakers. Besides limiting the movement of the speakers, it also compensates for non-flat surfaces and limits the contact surface area of the speaker. Rubber based feet also help isolating the vibrations within certain frequency ranges.
Port Position
ELAC Debut 2.0 F5.2 is a rear-firing port speaker so you have to make sure you leave enough space between the back of the speaker and wall or bookshelf so that it has room to breathe.
Available colors
ELAC Debut 2.0 F5.2 is available in Black.
Does the ELAC Debut 2.0 F5.2 come with a Grille?
Debut 2.0 F5.2 comes with magnetic grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible. Since the included grille of the Debut 2.0 F5.2 is magnetic type, it is very easy to put it on and off.
ELAC Debut 2.0 F5.2 with Grille
What's in the Box of ELAC Debut 2.0 F5.2?
Here are the items that are included inside the box of Debut 2.0 F5.2:
Floorstanding loudspeakerGrille4 Spikes (hex-nuts attached)Operating Instructions
Recommended Accessories
Here is a list of accessories that we think you may need for the ELAC Debut 2.0 F5.2.
User's Manual
For more information about how to setup, use and maintain the ELAC Debut 2.0 F5.2, use the direct link below to download the official manual document:
Download User Manual for ELAC Debut 2.0 F5.2
Official Brochure
Here is a link to download the official brochure for the ELAC Debut 2.0 F5.2 speaker:
Official Brochure for ELAC Debut 2.0 F5.2
Official Product Page
Official manufacturer's product page for the ELAC Debut 2.0 F5.2 speaker can be found below:
Official Product Page for ELAC Debut 2.0 F5.2
Warranty
3 Years of parts warranty and 3 Years of labor warranty is generally provided by the manufacturer.