Bowers & Wilkins 803 D5 is a 3-way Passive Bass Reflex Floor-standing speaker by Bowers Wilkins. It was released in 2025. It features a 1" Diamond dome Tweeter, 1 x 5" Midrange and 2 x 7" Aerofoil Woofer.
The D5 803. B&W lists it in the sitemap by number only, as product 300875, with no name in the URL at all.
The speaker has a frequency range of 19-28k Hz and a sensitivity of 90 dB. Bowers & Wilkins 803 D5 has an MSRP of 35000$ per pair.
Room Size Suitability
The size of the room where you plan to use the Bowers & Wilkins 803 D5 is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Bad |
| Small Room | Poor |
| Mid-size Room | Average |
| Large Room | Good |
| Very Large Room | Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Bowers Wilkins's 800 D5 Series of Loudspeakers
803 D5 is a member of Bowers Wilkins's 800 D5 series of Passive speakers. Below you can see the main specs of these speakers.
See all 7 Bowers Wilkins 800 D5 models compared »
Bowers Wilkins 800 D5 Series Speakers
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Bowers & Wilkins 803 D5 Speaker
Bowers & Wilkins 803 D5 has a Frequency response range of 19-28k Hz at ±0.0dB and Power Range of 50-1000 watts. With a minimum frequency of 19 Hz, 803 D5 delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Visit our Powered Subwoofers section to find out more about the available subwoofer options.
Here we have a comparison of how 803 D5's Low and High frequency values compare with the average, max and min Low and High frequency values in its class.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
Impedance and Sensitivity
Bowers & Wilkins 803 D5's nominal impedance level is
8 ohms but can go down to as low as
3.0 ohms, and has a sensitivity of
90 dB.
Sensitivity
Floor-standing Speakers
8 Ohms is pretty much the standard nominal impedance amongst stereo speakers and amplifiers so Bowers & Wilkins 803 D5 is not considered a difficult to drive speaker from nominal Impedance perspective.
Sensitivity
90dB of the Bowers & Wilkins 803 D5 is an average sensitivity for stereo speaker so it is neither easy nor difficult to drive Sensitivity wise.
Minimum Impedance of the Bowers & Wilkins 803 D5
Even though the nominal impedance of the 803 D5 is 8 ohms, the minimum impedance level of this speaker according to Bowers Wilkins is 3.0 ohms Bowers & Wilkins 803 D5 so while choosing an amplifier, you should ideally check if the unit you are considering can provide this impedance level.
Check the amplifiers that are in a similar price range to the Bowers & Wilkins 803 D5:
Input Type
803 D5 has Binding post type connectors and lets bi-amping/bi-wiring. Bi-wiring can enhance the overall transparency of your loudspeakers by using separate speaker wires for the low and high-frequency drivers from a single amplifier. Bi-amping, on the other hand, involves using separate amplifiers for the high and low-frequency drivers, potentially resulting in a greater dynamic range and reduced distortion.
Bowers & Wilkins 803 D5 External Dimensions and Weight
Bowers & Wilkins 803 D5 has external dimensions of (Height x Width x Depth) 45-7/8 x 14-1/8 x 19-5/8inch (1165.0 x 359.0 x 499.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Bowers & Wilkins 803 D5 is approximately 1791.4cm2 / 277.7inch2.
WeightThe Bowers & Wilkins 803 D5 weighs 63.70kg / 140.1lbs per piece. Here is a comparison of how 803 D5's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers under $30000
Cabinet type and Materials
Bowers & Wilkins 803 D5 has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Port Position
Bowers & Wilkins 803 D5 is a rear-firing port speaker so you have to make sure you leave enough space between the back of the speaker and wall or bookshelf so that it has room to breathe.
Does the Bowers & Wilkins 803 D5 come with a Grille?
803 D5 comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Bowers & Wilkins 803 D5.
Official Product Page
Official manufacturer's product page for the Bowers & Wilkins 803 D5 speaker can be found below:
Official Product Page for Bowers & Wilkins 803 D5
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.