Klipsch Reference Premiere RP-6203F is a 2-way Passive Bass Reflex Floor-standing speaker by Klipsch. It is due in October 2026. It features a 1" Tractrix Horn Tweeter and 2 x 6.5" Cerametallic Woofer.
The smaller tower: two 6.5 inch Cerametallic woofers with Faraday rings under a 1 inch titanium LTS tweeter, crossed at 1770 Hz, and dual-chamber rear-firing Tractrix ports. 96 dB sensitive and rated 125 W continuous, with adjustable metal outrigger feet.
The speaker has a frequency range of 38-25k Hz and a sensitivity of 96 dB. Klipsch RP-6203F has an MSRP of 1400$ per pair.
Room Size Suitability
The size of the room where you plan to use the Klipsch RP-6203F is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Bad |
| Small Room | Poor |
| Mid-size Room | Good |
| Large Room | Good |
| Very Large Room | Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Klipsch replaced the older RP-6000F II with this model. Follow the link to read our detailed comparison of these models:
Compare Klipsch RP-6203F vs Klipsch RP-6000F II
Klipsch's Reference Premiere (RP) III Series of Loudspeakers
RP-6203F is a member of Klipsch's Reference Premiere (RP) III series of Passive speakers. Below you can see the main specs of these speakers.
See all 9 Klipsch Reference Premiere (RP) III models compared »
Klipsch Reference Premiere (RP) III Series Speakers
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Klipsch RP-6203F Speaker
Klipsch RP-6203F has a Frequency response range of 38-25k Hz and Power Range of up to 125 watts. With a minimum frequency of 38 Hz, RP-6203F delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how RP-6203F's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Floor-standing Speakers
Thinking about a subwoofer for the Klipsch RP-6203F?
Among the speakers in our database with a max MSRP price of 1500$ (Pair), these are the 5 Passive Floor-standing speakers that have the deeper bass levels than the Klipsch RP-6203F's 38Hz:
Crossover frequency of the Klipsch RP-6203F?
The crossover frequency of the RP-6203F is set to 1770 Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
Klipsch RP-6203F's nominal impedance level is
8 ohms but can go down to as low as
3.5 ohms, and has a sensitivity of
96 dB.
Sensitivity
Floor-standing Speakers
8 Ohms is pretty much the standard nominal impedance amongst stereo speakers and amplifiers so Klipsch Reference Premiere RP-6203F is not considered a difficult to drive speaker from nominal Impedance perspective.
Sensitivity
96dB of the Klipsch Reference Premiere RP-6203F is considered a high sensitivity compared to average stereo speaker which makes RP-6203F an easy to drive from Sensitivity perspective. If you are planning to power your speaker with a Tube amp which are generally very low power, the Klipsch RP-6203F will be a good choice. Work out how loud the Klipsch RP-6203F plays in your room →
Minimum Impedance of the Klipsch RP-6203F
Even though the nominal impedance of the RP-6203F is 8 ohms, the minimum impedance level of this speaker according to Klipsch is 3.5 ohms Klipsch Reference Premiere RP-6203F so while choosing an amplifier, you should ideally check if the unit you are considering can provide this impedance level.
What amplifier does the Klipsch RP-6203F need?
At normal listening levels in a medium room, about
1.9–60 W
per channel into 8 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $1,500, or every amplifier we cover.
Input Type
RP-6203F has Binding post type connectors and lets bi-amping/bi-wiring. Bi-wiring can enhance the overall transparency of your loudspeakers by using separate speaker wires for the low and high-frequency drivers from a single amplifier. Bi-amping, on the other hand, involves using separate amplifiers for the high and low-frequency drivers, potentially resulting in a greater dynamic range and reduced distortion.
Work out what gauge speaker cable this run needs →
Klipsch RP-6203F External Dimensions and Weight
Klipsch RP-6203F has external dimensions of (Height x Width x Depth) 39-5/8 x 9-5/16 x 17-9/16inch (1006.0 x 236.0 x 446.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Klipsch RP-6203F is approximately 1052.6cm2 / 163.2inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers under $1500
Cabinet type and Materials
Klipsch RP-6203F has a
Bass Reflex type cabinet and a MDF (internally braced) finish. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Port Position
Klipsch RP-6203F is a rear-firing port speaker so you have to make sure you leave enough space between the back of the speaker and wall or bookshelf so that it has room to breathe.
Available colors
Klipsch RP-6203F is available in Ebony and Walnut.
Does the Klipsch RP-6203F come with a Grille?
RP-6203F comes with grilles in black color choices. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Klipsch Reference Premiere RP-6203F.
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.