Klipsch Reference Premiere RP-6103M is a 2-way Passive Bass Reflex Bookshelf speaker by Klipsch. It is due in October 2026. It features a 1" Tractrix Horn Tweeter and 1 x 6.5" Cerametallic Woofer.
The 6.5 inch standmount, and the one most people will compare against the RP-600M II it replaces: a single Cerametallic woofer with a Faraday ring, a 1 inch titanium LTS tweeter in a flush-mounted BMC axial Tractrix horn, crossed at 1500 Hz, rear ported, on dual binding posts.
The speaker has a frequency range of 44-25k Hz and a sensitivity of 94.5 dB. Klipsch RP-6103M has an MSRP of 700$ per pair.
Room Size Suitability
The size of the room where you plan to use the Klipsch RP-6103M is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Average |
| Small Room | Good |
| Mid-size Room | Average |
| Large Room | Poor |
| Very Large Room | Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Klipsch replaced the older RP-600M II with this model. Follow the link to read our detailed comparison of these models:
Compare Klipsch RP-6103M vs Klipsch RP-600M II
Klipsch's Reference Premiere (RP) III Series of Loudspeakers
RP-6103M is a member of Klipsch's Reference Premiere (RP) III series of Passive speakers. Below you can see the main specs of these speakers.
See all 9 Klipsch Reference Premiere (RP) III models compared »
Klipsch Reference Premiere (RP) III Series Speakers
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Klipsch RP-6103M Speaker
Klipsch RP-6103M has a Frequency response range of 44-25k Hz and Power Range of up to 100 watts. With a minimum frequency of 44 Hz, RP-6103M delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how RP-6103M's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Bookshelf Speakers
Thinking about a subwoofer for the Klipsch RP-6103M?
Crossover frequency of the Klipsch RP-6103M?
The crossover frequency of the RP-6103M is set to 1500 Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
Klipsch RP-6103M's nominal impedance level is
8 ohms but can go down to as low as
3.4 ohms, and has a sensitivity of
94.5 dB.
Sensitivity
Bookshelf Speakers
8 Ohms is pretty much the standard nominal impedance amongst stereo speakers and amplifiers so Klipsch Reference Premiere RP-6103M is not considered a difficult to drive speaker from nominal Impedance perspective.
Sensitivity
94dB of the Klipsch Reference Premiere RP-6103M is considered a high sensitivity compared to average stereo speaker which makes RP-6103M an easy to drive from Sensitivity perspective. If you are planning to power your speaker with a Tube amp which are generally very low power, the Klipsch RP-6103M will be a good choice. Work out how loud the Klipsch RP-6103M plays in your room →
Minimum Impedance of the Klipsch RP-6103M
Even though the nominal impedance of the RP-6103M is 8 ohms, the minimum impedance level of this speaker according to Klipsch is 3.4 ohms Klipsch Reference Premiere RP-6103M so while choosing an amplifier, you should ideally check if the unit you are considering can provide this impedance level.
What amplifier does the Klipsch RP-6103M need?
At normal listening levels in a medium room, about
3.0–60 W
per channel into 8 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $750, or every amplifier we cover.
Input Type
RP-6103M has Binding post type connectors and lets bi-amping/bi-wiring. Bi-wiring can enhance the overall transparency of your loudspeakers by using separate speaker wires for the low and high-frequency drivers from a single amplifier. Bi-amping, on the other hand, involves using separate amplifiers for the high and low-frequency drivers, potentially resulting in a greater dynamic range and reduced distortion.
Work out what gauge speaker cable this run needs →
Klipsch RP-6103M External Dimensions and Weight
Klipsch RP-6103M has external dimensions of (Height x Width x Depth) 15-3/4 x 7-15/16 x 13inch (400.0 x 202.0 x 330.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Klipsch RP-6103M is approximately 666.6cm2 / 103.3inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
Weight
All Bookshelf Speakers
Weight
Bookshelf Speakers under $750
Cabinet type and Materials
Klipsch RP-6103M has a
Bass Reflex type cabinet and a MDF (internally braced) finish. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Port Position
Klipsch RP-6103M is a rear-firing port speaker so you have to make sure you leave enough space between the back of the speaker and wall or bookshelf so that it has room to breathe.
Available colors
Klipsch RP-6103M is available in Ebony and Walnut.
Wall Mounting
RP-6103M doesn't sport any built-in mounting bracket, so you need an external structure to mount it on walls.
Does the Klipsch RP-6103M come with a Grille?
RP-6103M comes with grilles in black color choices. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Klipsch Reference Premiere RP-6103M.
- Speaker Cable and Connectors
- Vibration Isolators: IsoAcoustics isolators are our favorite isolators but you may find more affordable options too.
- Acoustic Panels and Treatments: Your room is as important as your stereo equipment so acoustic treatments goes a long way in improving the overall performance.
- Speaker Stands: Stands bring your bookshelf speakers to ideal height (rule of thumb is to have the tweeter level with your ear in your listening position), helps stability and acoustical isolation.
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.