Klipsch Reference Premiere RP-600M II is a 2-way Passive Bass Reflex Bookshelf speaker by Klipsch. It was released in 2022. It features a 1" Hybrid Tractrix Horn Tweeter and 1 x 6.5" Cerametallic cone Woofer. The speaker has a frequency range of 44-25k Hz and a sensitivity of 94.5 dB. Klipsch RP-600M II has an MSRP of 749$ per pair but can often be found around 459$ per pair.
Room Size Suitability
The size of the room where you plan to use the Klipsch RP-600M II is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Average |
| Small Room | Good |
| Mid-size Room | Average |
| Large Room | Poor |
| Very Large Room | Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Klipsch replaced the older Klipsch RP-600M with this model and later RP-600M II was replaced with Klipsch RP-6103M. Follow the links to compare these speakers in detail: Compare Klipsch RP-600M II vs Klipsch RP-600M
Compare Klipsch RP-600M II vs Klipsch RP-6103M
Klipsch RP-600M II Lifestyle
Klipsch's Reference Premiere (RP) II Series of Loudspeakers
RP-600M II is a member of Klipsch's Reference Premiere (RP) II series of Passive speakers. Reference Premiere II is the latest generation of Klipsch's RP line, with redesigned horns and drivers. Below you can see the main specs of these speakers.
See all 10 Klipsch Reference Premiere (RP) II models compared »
Klipsch Reference Premiere (RP) II Series Speakers
Klipsch Reference Premiere (RP) II Series Speakers
Frequency Response of the Klipsch RP-600M II Speaker
Klipsch RP-600M II has a Frequency response range of 44-25k Hz and Power Range of up to 100 watts. With a minimum frequency of 44 Hz, RP-600M II delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how RP-600M II's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Bookshelf Speakers
Thinking about a subwoofer for the Klipsch RP-600M II?
Klipsch RP-600M II's Cerametallic cone Woofer
Klipsch RP-600M II's titanium Hybrid Tractrix Horn Tweeter
Crossover frequency of the Klipsch RP-600M II?
The crossover frequency of the RP-600M II is set to 1500 Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
Klipsch RP-600M II's nominal impedance level is
8 ohms and has a sensitivity of
94.5 dB.
Sensitivity
Bookshelf Speakers
8 Ohms is pretty much the standard nominal impedance amongst stereo speakers and amplifiers so Klipsch Reference Premiere RP-600M II is not considered a difficult to drive speaker from nominal Impedance perspective.
Sensitivity
94dB of the Klipsch Reference Premiere RP-600M II is considered a high sensitivity compared to average stereo speaker which makes RP-600M II an easy to drive from Sensitivity perspective. If you are planning to power your speaker with a Tube amp which are generally very low power, the Klipsch RP-600M II will be a good choice. Work out how loud the Klipsch RP-600M II plays in your room →
What amplifier does the Klipsch RP-600M II need?
At normal listening levels in a medium room, about
3.0–60 W
per channel into 8 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $750, or every amplifier we cover.
Input Type
RP-600M II has Binding post type connectors and lets bi-amping/bi-wiring. Bi-wiring can enhance the overall transparency of your loudspeakers by using separate speaker wires for the low and high-frequency drivers from a single amplifier. Bi-amping, on the other hand, involves using separate amplifiers for the high and low-frequency drivers, potentially resulting in a greater dynamic range and reduced distortion.
Work out what gauge speaker cable this run needs →
Klipsch RP-600M II Back View
Klipsch RP-600M II's Binding post terminals allows Bi-amping or bi-wiring
Klipsch RP-600M II External Dimensions and Weight
Klipsch RP-600M II has external dimensions of (Height x Width x Depth) 15-13/16 x 8 x 13-1/16inch (402.0 x 204.0 x 332.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Klipsch RP-600M II is approximately 677.3cm2 / 105.0inch2.
To get a better perspective on the real life size of Klipsch RP-600M II, let's compare it with a standard size Compact Disc which has a diameter of 4.7inch (120mm).
Klipsch RP-600M II Speaker Size Compared to a Compact Disc
Here we place the Klipsch RP-600M II virtually next to a standard width amplifier and turntable on a BDI Octave Media Cabinet to get a better idea about the size.
Klipsch RP-600M II Speaker next to an amplifier and turntable
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe Klipsch RP-600M II weighs 8.20kg / 18lbs per piece. Here is a comparison of how RP-600M II's weight compares with the average, max and min weights in its class.
Weight
All Bookshelf Speakers
Weight
Bookshelf Speakers under $750
Cabinet type and Materials
Klipsch RP-600M II has a
Bass Reflex type cabinet and a MDF/Wood-grain vinyl finish. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Klipsch RP-600M II - Side View
Speaker Feet
Klipsch RP-600M II comes with Cork pads which you can use to secure your loudspeaker on the surface that you are putting on.
It is always recommended to use some kind of feet under all types of speakers. Besides limiting the movement of the speakers, it also compensates for non-flat surfaces and limits the contact surface area of the speaker. Rubber based feet also help isolating the vibrations within certain frequency ranges.
Port Position
Klipsch RP-600M II is a rear-firing port speaker so you have to make sure you leave enough space between the back of the speaker and wall or bookshelf so that it has room to breathe.
Available colors
Klipsch RP-600M II is available in Walnut and Black.
Wall Mounting
RP-600M II doesn't sport any built-in mounting bracket, so you need an external structure to mount it on walls.
Does the Klipsch RP-600M II come with a Grille?
RP-600M II comes with magnetic grilles in black color choices. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible. Since the included grille of the RP-600M II is magnetic type, it is very easy to put it on and off.
Klipsch RP-600M II with Grille
What's in the Box of Klipsch RP-600M II?
Here are the items that are included inside the box of RP-600M II:
- 2 Bookshelf loudspeakers
- 2 Grilles
- 4 Terminal jumpers (pre-installed)
- User Manual
- Important Safety Instructions
- Warranty Information
Recommended Accessories
Here is a list of accessories that we think you may need for the Klipsch Reference Premiere RP-600M II.
- Speaker Cable and Connectors
- Vibration Isolators: IsoAcoustics isolators are our favorite isolators but you may find more affordable options too.
- Acoustic Panels and Treatments: Your room is as important as your stereo equipment so acoustic treatments goes a long way in improving the overall performance.
- Speaker Stands: Stands bring your bookshelf speakers to ideal height (rule of thumb is to have the tweeter level with your ear in your listening position), helps stability and acoustical isolation.
User's Manual
For more information about how to setup, use and maintain the Klipsch Reference Premiere RP-600M II, use the direct link below to download the official manual document:
Download User Manual for Klipsch RP-600M II
Official Product Page
Official manufacturer's product page for the Klipsch Reference Premiere RP-600M II speaker can be found below:
Official Product Page for Klipsch RP-600M II
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.