Klipsch Reference Premiere RP-8060FA II is a 2-way Passive Bass Reflex Floor-standing speaker by Klipsch. It was released in 2021. It features a 1" Tractrix Horn Tweeter and 2 x 8" Cerametallic Woofer. The speaker has a frequency range of 35-25k Hz and a sensitivity of 98 dB. Klipsch RP-8060FA II has an MSRP of 2998$ per pair but can often be found around 1798$ per pair.
RP-8060FA II also features built-in Dolby Atmos system which consists of up-firing one 6.5 inch woofer and one 1-inch tweeter drivers.
Klipsch RP-8060FA II Dolby Atmos Drivers
Room Size Suitability
The size of the room where you plan to use the Klipsch RP-8060FA II is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Bad |
| Small Room | Poor |
| Mid-size Room | Good |
| Large Room | Good |
| Very Large Room | Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Klipsch replaced the older Klipsch RP-8060FA with this model and later RP-8060FA II was replaced with Klipsch RP-8263FA. Follow the links to compare these speakers in detail: Compare Klipsch RP-8060FA II vs Klipsch RP-8060FA
Compare Klipsch RP-8060FA II vs Klipsch RP-8263FA
Klipsch RP-8060FA II Lifestyle
Klipsch's Reference Premiere (RP) II Series of Loudspeakers
RP-8060FA II is a member of Klipsch's Reference Premiere (RP) II series of Passive speakers. Reference Premiere II is the latest generation of Klipsch's RP line, with redesigned horns and drivers. Below you can see the main specs of these speakers.
See all 10 Klipsch Reference Premiere (RP) II models compared »
Klipsch Reference Premiere (RP) II Series Speakers
Klipsch Reference Premiere (RP) II Series Speakers
Frequency Response of the Klipsch RP-8060FA II Speaker
Klipsch RP-8060FA II has a Frequency response range of 35-25k Hz and Power Range of up to 150 watts. With a minimum frequency of 35 Hz, RP-8060FA II delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how RP-8060FA II's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Floor-standing Speakers
Thinking about a subwoofer for the Klipsch RP-8060FA II?
Among the speakers in our database with a max MSRP price of 3000$ (Pair), these are the 5 Passive Floor-standing speakers that have the deeper bass levels than the Klipsch RP-8060FA II's 35Hz:
Crossover frequency of the Klipsch RP-8060FA II?
The crossover frequency of the RP-8060FA II is set to 1630 Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
Klipsch RP-8060FA II's nominal impedance level is
8 ohms and has a sensitivity of
98 dB.
Sensitivity
Floor-standing Speakers
8 Ohms is pretty much the standard nominal impedance amongst stereo speakers and amplifiers so Klipsch Reference Premiere RP-8060FA II is not considered a difficult to drive speaker from nominal Impedance perspective.
Sensitivity
98dB of the Klipsch Reference Premiere RP-8060FA II is considered a high sensitivity compared to average stereo speaker which makes RP-8060FA II an easy to drive from Sensitivity perspective. If you are planning to power your speaker with a Tube amp which are generally very low power, the Klipsch RP-8060FA II will be a good choice. Work out how loud the Klipsch RP-8060FA II plays in your room →
What amplifier does the Klipsch RP-8060FA II need?
At normal listening levels in a medium room, about
1.2–60 W
per channel into 8 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $3,000, or every amplifier we cover.
Input Type
RP-8060FA II has Binding post type connectors and lets bi-amping/bi-wiring. Bi-wiring can enhance the overall transparency of your loudspeakers by using separate speaker wires for the low and high-frequency drivers from a single amplifier. Bi-amping, on the other hand, involves using separate amplifiers for the high and low-frequency drivers, potentially resulting in a greater dynamic range and reduced distortion.
Work out what gauge speaker cable this run needs →
Klipsch RP-8060FA II Back View
Klipsch RP-8060FA II External Dimensions and Weight
Klipsch RP-8060FA II has external dimensions of (Height x Width x Depth) 43-1/8 x 10-7/8 x 20-13/16inch (1099.0 x 277.0 x 528.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Klipsch RP-8060FA II is approximately 1462.6cm2 / 226.7inch2.
To get a better perspective on the real life size of Klipsch RP-8060FA II, let's compare it with a standard size Compact Disc which has a diameter of 4.7inch (120mm).
Klipsch RP-8060FA II Speaker Size Compared to a Compact Disc
Here we place the Klipsch RP-8060FA II virtually next to a standard width amplifier and turntable on a media center to get a better idea about the size.
Klipsch RP-8060FA II Floor-standing Speaker next to a Media Stand
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe Klipsch RP-8060FA II weighs 34.40kg / 75.7lbs per piece. Here is a comparison of how RP-8060FA II's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers under $3000
Cabinet type and Materials
Klipsch RP-8060FA II has a
Bass Reflex type cabinet and a MDF/Wood-grain vinyl finish. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Klipsch RP-8060FA II - Side View
Port Position
Klipsch RP-8060FA II is a rear-firing port speaker so you have to make sure you leave enough space between the back of the speaker and wall or bookshelf so that it has room to breathe.
Available colors
Klipsch RP-8060FA II is available in Walnut and Ebony.
Does the Klipsch RP-8060FA II come with a Grille?
RP-8060FA II comes with magnetic grilles in Black color choices. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible. Since the included grille of the RP-8060FA II is magnetic type, it is very easy to put it on and off.
Klipsch RP-8060FA II with Grille
What's in the Box of Klipsch RP-8060FA II?
Here are the items that are included inside the box of RP-8060FA II:
- Floorstanding loudspeaker
- Stabilizer feet (pre-installed)
- Front grille
- Top grille (pre-installed)
- 2 Terminal jumpers (pre-installed)
- Rubber cap (pre-installed)
- User Manual
- Important Safety Instructions
- Warranty Information
Recommended Accessories
Here is a list of accessories that we think you may need for the Klipsch Reference Premiere RP-8060FA II.
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.