R-625FA is a 2-way Passive Bass Reflex Floor-standing speaker by Klipsch. It features a 1" Tweeter and 2 x 6.5" Copper-spun IMG Woofer. The speaker has a frequency range of 38-21k Hz and a sensitivity of 96 dB. Klipsch R-625FA has an MSRP of 1658$ per pair. R-625FA also features built-in Dolby Atmos system which consists of up-firing 1 x 5.25 drivers.
Klipsch R-625FA Dolby Atmos Drivers
R-625FA is a member of Klipsch's Reference (R) series of Passive speakers. Below you can see the main specs of these speakers.
Klipsch Reference (R) Series Speakers
**This post contains affiliate links and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response
Klipsch R-625FA has a Frequency response range of 38-21k Hz at ±3dB and Power Range of up to 100 watts. At a minimum frequency of 38 Hz, R-625FA will provide a deep bass that will probably satisfy majority of listeners, especially for music. Movie lovers and music listeners who likes to experience a full range response will still benefit from use of a subwooofer though.
To focus on the potential subwoofers that are in a similar price range with Klipsch R-625FA, check the Powered Subwoofers under $2000. Alternatively, find theFull list of Powered Subwoofers regardless from the price.
Here we have a comparison of how R-625FA's Low and High frequency values compare with the average, max and min Low and High frequency values in its class.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
Among the speakers in our database with a max MSRP price of 2000$ (Pair), these are the 5 Passive Floor-standing speakers that have the deeper bass levels than the Klipsch R-625FA's 38Hz:
What is the Crossover frequency of Klipsch R-625FA?
Crossover frequency of the R-625FA is set to 2000Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
Klipsch R-625FA's nominal impedance level is 8 ohms and has a sensitivity of 96 dB.
Sensitivity
Floor-standing Speakers
Is the Klipsch Reference R-625FA an easy to drive speaker?
8 Ohms is pretty much the standard impedance amongst stereo speakers and amplifiers so Klipsch Reference R-625FA is not considered a difficult to drive speaker from nominal Impedance perspective.
96dB of Klipsch Reference R-625FA is considered a high sensitivity compared to average stereo speaker which makes R-625FA an easy to drive from Sensitivity perspective. If you are planning to power your speaker with a Tube amp which are generally very low power, the Klipsch R-625FA will be a good choice.
Input Type
R-625FA features Post type connectors. Bi-amping and Bi-wiring is not possible.
Klipsch R-625FA's Post terminals
Klipsch R-625FA Speaker Size: Weight and Dimensions
Klipsch R-625FA has external dimensions of (Height x Width x Depth) 40-3/16 x 9-3/8 x 16-3/4inch (1021.0 x 239.0 x 426.0mm ). Each speaker weighs 22.20kg / 48.8lbs.
Base Surface Area and Volume
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Klipsch R-625FA is approximately 1018.1cm2 / 157.8inch2.
To have a better perspective on the real life size of Klipsch R-625FA, let's compare it with a standard size Compact Disc which has a diameter of 4.7inch (120mm).
Klipsch R-625FA Speaker Size Compared to a Compact Disc
Here we place the Klipsch R-625FA virtually next to a standard width amplifier and turntable on a media center to get a better idea about the size.
Klipsch R-625FA Floor-standing Speaker next to a Media Stand
Here we have a comparison of how R-625FA's weight compared with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers under $2000
Cabinet type and Materials
Klipsch R-625FA has a
Bass Reflex type cabinet and MDF/Wood-grain vinyl finish. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Speaker Feet
Klipsch R-625FA comes with
2 Feet which you can use to secure your loudspeaker on the surface that you are putting on.
It is always recommended to use some kind of feet under all types of speakers. Besides limiting the movement of the speakers, it also compensates for non-flat surfaces and limits the contact surface area of the speaker. Rubber based feet also help isolating the vibrations within certain frequency ranges.
Port Position
Klipsch R-625FA is a rear-firing port speaker so you have to make sure you leave enough space between the back of the speaker and wall or bookshelf so that it has room to breathe.
Available colors
Klipsch R-625FA is available in Black.
Grille
R-625FA comes with removable front and top grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound pass as clearly as possible.
Klipsch R-625FA with Grille
What's in the Box of Klipsch R-625FA?
Here are the items that are included inside the box of R-625FA:
Floorstanding loudspeaker2 Grilles (installed)2 Feet4 ScrewsQuick Setup GuideImportant Safety InstructionsWarranty InformationLoudspeaker Feet note
User's Manual
For more information about how to setup, use and maintain the Klipsch Reference R-625FA, use the direct link below to download the official manual document:
Download User Manual for Klipsch R-625FA
Official Product Page
Official manufacturer's product page for the Klipsch Reference R-625FA speaker can be found below:
Official Product Page for Klipsch R-625FA
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.
