In this review, we will be comparing Imagine X2T and R-625FA, two Passive Floor-standing speakers from PSB and Klipsch. Let's have a brief look at the main features
of PSB Imagine X2T and Klipsch R-625FA first before getting into our more
detailed comparison.
What size room are the PSB Imagine X2T and Klipsch R-625FA speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the PSB Imagine X2T and Klipsch R-625FA compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Imagine X2T is a 3-way design whereas the R-625FA is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
PSB Imagine X2T |
Klipsch R-625FA |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 5.25-inch |
- |
|
Woofer
|
2 x 6.2-inch
|
2 x 6.5-inch
|
Imagine X2T features a 1" titanium with neodymium magnets Dome Tweeter , a 5.25" Midrange and 2 x 6.2" Clay/Ceramic/Poly Woofer with a Crossover frequency at 500Hz and 2200Hz. On the other hand, the R-625FA features a 1" Tweeter and 2 x 6.5" Copper-spun IMG Woofer with a Crossover frequency at 2000Hz.
Frequency Response
Imagine X2T has a frequency range of 30-23k Hz whereas R-625FA has a frequency range of 38-21k Hz. With a minimum frequency of 30Hz, the Imagine X2T can go significantly deeper on the low side and provide stronger bass compared to the R-625FA's min frequency of 38Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Imagine X2T and R-625FA have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Imagine X2T sensitivity is rated at 90 dB and the R-625FA's is at 96 dB. This 6 dB difference makes the Klipsch R-625FA a more sensitive speaker compared to PSB Imagine X2T, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Imagine X2T can handle a max power of 200 watts RMS from the amp the whereas R-625FA has a max power handling value of 100 watts RMS, 100 watts less than the Imagine X2T.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Imagine X2T features 5-Way post posts which make bi-amping or bi-wiring possible. R-625FA has a Post which doesn't feature bi-amping/bi-wiring.
PSB Imagine X2T's 5-Way post terminals allows Bi-amping or bi-wiring
Klipsch R-625FA's Post terminals
Cabinet Type and Port Position
Imagine X2T has a front firing port whereas R-625FA has a rear firing ports. PSB Imagine X2T's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Klipsch R-625FA with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare PSB Imagine X2T's and Klipsch R-625FA's external dimensions. PSB Imagine X2T has external dimensions of 1020.0 x 229.0 x 426.0mm ( 40-1/8 x 9 x 16-3/4inch) whereas Klipsch R-625FA has external dimensions of 1021.0 x 239.0 x 426.0mm ( 40-3/16 x 9-3/8 x 16-3/4inch) .
Below you can see the front view size comparison of PSB Imagine X2T and Klipsch R-625FA in scale.
Comparison image of PSB Imagine X2T and Klipsch R-625FA Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the PSB Imagine X2T is approximately 975.5cm2 / 151.2inch2 and base area of the Klipsch R-625FA is approximately 1018.1cm2 / 157.8inch2. The Imagine X2T requires 4% less surface area than the R-625FA which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The PSB Imagine X2T weighs 23.60kg / 51.9lbs and the Klipsch R-625FA weighs 22.20kg / 48.8lbs. This makes the Imagine X2T 6% heavier than the R-625FA.
Here is a comparison of how Imagine X2T and R-625FA's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of PSB Imagine X2T?
Here are the items that are included inside the box of Imagine X2T:
Floor-standing speakerGrille4 Rubber feet4 Spiked FeetWrenchQuick Start GuideWarranty Card
What's in the Box of Klipsch R-625FA?
Here are the items that come with the R-625FA:
Floorstanding loudspeaker2 Grilles (installed)2 Feet4 ScrewsQuick Setup GuideImportant Safety InstructionsWarranty InformationLoudspeaker Feet note
 Max Input Power |
200 watts
vs
100 watts
|
Handle more power from your amplifier |
 Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
 Low Frequency Response |
30 Hz
vs
38 Hz
|
Generates deeper bass |
 High Frequency Response |
23k Hz
vs
21k Hz
|
Generates higher frequency |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
 Base Surface Area |
975cm2 (229x426mm)
vs
1018cm2 (239x426mm)
|
Takes less floor space |
 Price per pair* |
1500USD
vs
1658USD
|
costs less (*prices may change depending on the seller, location and time) |
 Sensitivity |
96 dB
vs
90 dB
|
Play louder with same amount of amplification power |
| Woofer Size |
6.5 inches
vs
6.2 inches
|
Larger woofer |
 Dolby Atmos Drivers |
Built-in 1 x 5.25
vs
No
|
Dolby Atmos Compatibility |
| General |
PSB Imagine X2T |
Klipsch Reference R-625FA |
| Brand |
PSB |
Klipsch |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
20-200 watts |
up to 100 watts |
| Sensitivity |
90 dB |
96 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
30-23k Hz |
38-21k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6.2" |
6.5" |
| Woofer Composition |
Clay/Ceramic/Poly |
Copper-spun IMG |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Dome |
n/a |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
5.25" |
No |
| Crossover Frequency |
500Hz and 2200Hz |
2000Hz |
| Firing Direction |
front |
rear |
Physical Specs |
|
|
| Height |
1021.0mm (40.2") |
1021.0mm (40.2") |
| Width |
229.0mm (9") |
239.0mm (9.4") |
| Depth |
426.0mm (16.8") |
426.0mm (16.8") |
| Weight |
23.60kg (51.9lbs) |
22.20kg (48.8lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain |
MDF/Wood-grain vinyl |
| Available Colors |
Black |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |