Klipsch Reference Premiere RP-8263FA is a 2-way Passive Bass Reflex Floor-standing speaker by Klipsch. It is due in October 2026. It features a 1" Tractrix Horn Tweeter and 2 x 8" Cerametallic Woofer.
A dual 8 inch Cerametallic two-way tower with a Dolby Atmos height channel built into the top: a second 1 inch titanium LTS tweeter and a 6.5 inch Cerametallic woofer in a sealed acoustic-suspension box, crossed at 2 kHz and rated 100 W continuous, on its own binding post. The main channel crosses at 1630 Hz through a flush-mounted BMC axial Tractrix horn and vents through dual-chamber rear Tractrix ports.
The speaker has a frequency range of 35-25k Hz and a sensitivity of 98 dB. Klipsch RP-8263FA has an MSRP of 2600$ per pair.
RP-8263FA also features built-in Dolby Atmos system which consists of up-firing drivers.
Room Size Suitability
The size of the room where you plan to use the Klipsch RP-8263FA is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Bad |
| Small Room | Poor |
| Mid-size Room | Good |
| Large Room | Good |
| Very Large Room | Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Klipsch replaced the older RP-8060FA II with this model. Follow the link to read our detailed comparison of these models:
Compare Klipsch RP-8263FA vs Klipsch RP-8060FA II
Klipsch's Reference Premiere (RP) III Series of Loudspeakers
RP-8263FA is a member of Klipsch's Reference Premiere (RP) III series of Passive speakers. Below you can see the main specs of these speakers.
See all 9 Klipsch Reference Premiere (RP) III models compared »
Klipsch Reference Premiere (RP) III Series Speakers
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Klipsch RP-8263FA Speaker
Klipsch RP-8263FA has a Frequency response range of 35-25k Hz and Power Range of up to 150 watts. With a minimum frequency of 35 Hz, RP-8263FA delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how RP-8263FA's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Floor-standing Speakers
Thinking about a subwoofer for the Klipsch RP-8263FA?
Among the speakers in our database with a max MSRP price of 3000$ (Pair), these are the 5 Passive Floor-standing speakers that have the deeper bass levels than the Klipsch RP-8263FA's 35Hz:
Crossover frequency of the Klipsch RP-8263FA?
The crossover frequency of the RP-8263FA is set to 1630 Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
Klipsch RP-8263FA's nominal impedance level is
8 ohms but can go down to as low as
3.84 ohms, and has a sensitivity of
98 dB.
Sensitivity
Floor-standing Speakers
8 Ohms is pretty much the standard nominal impedance amongst stereo speakers and amplifiers so Klipsch Reference Premiere RP-8263FA is not considered a difficult to drive speaker from nominal Impedance perspective.
Sensitivity
98dB of the Klipsch Reference Premiere RP-8263FA is considered a high sensitivity compared to average stereo speaker which makes RP-8263FA an easy to drive from Sensitivity perspective. If you are planning to power your speaker with a Tube amp which are generally very low power, the Klipsch RP-8263FA will be a good choice. Work out how loud the Klipsch RP-8263FA plays in your room →
Minimum Impedance of the Klipsch RP-8263FA
Even though the nominal impedance of the RP-8263FA is 8 ohms, the minimum impedance level of this speaker according to Klipsch is 3.84 ohms Klipsch Reference Premiere RP-8263FA so while choosing an amplifier, you should ideally check if the unit you are considering can provide this impedance level.
What amplifier does the Klipsch RP-8263FA need?
At normal listening levels in a medium room, about
1.2–60 W
per channel into 8 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $3,000, or every amplifier we cover.
Input Type
RP-8263FA has Binding post type connectors and lets bi-amping/bi-wiring. Bi-wiring can enhance the overall transparency of your loudspeakers by using separate speaker wires for the low and high-frequency drivers from a single amplifier. Bi-amping, on the other hand, involves using separate amplifiers for the high and low-frequency drivers, potentially resulting in a greater dynamic range and reduced distortion.
Work out what gauge speaker cable this run needs →
Klipsch RP-8263FA External Dimensions and Weight
Klipsch RP-8263FA has external dimensions of (Height x Width x Depth) 43-1/8 x 10-13/16 x 20-13/16inch (1095.0 x 275.0 x 528.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Klipsch RP-8263FA is approximately 1452.0cm2 / 225.1inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers under $3000
Cabinet type and Materials
Klipsch RP-8263FA has a
Bass Reflex type cabinet and a MDF (internally braced) finish. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Port Position
Klipsch RP-8263FA is a rear-firing port speaker so you have to make sure you leave enough space between the back of the speaker and wall or bookshelf so that it has room to breathe.
Available colors
Klipsch RP-8263FA is available in Ebony and Walnut.
Does the Klipsch RP-8263FA come with a Grille?
RP-8263FA comes with grilles in black color choices. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Klipsch Reference Premiere RP-8263FA.
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.