Klipsch Heritage Rebellion is a 2-way Passive Bass Reflex Bookshelf speaker by Klipsch. It was released in 2026. It features a Compression Horn Tweeter and 1 x 8" Paper Woofer.
A horn-loaded standmount in the Heritage line: a K-81-EP 8 inch woofer and the K-702 compression driver crossed at 715 Hz, 95 dB sensitive, 14.5 kg each.
The speaker has a frequency range of 60-20k Hz and a sensitivity of 95 dB.
Room Size Suitability
The size of the room where you plan to use the Klipsch Heritage Rebellion is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Poor |
| Small Room | Average |
| Mid-size Room | Good |
| Large Room | Average |
| Very Large Room | Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Klipsch's Heritage Series of Loudspeakers
Rebellion is a member of Klipsch's Heritage series of Passive speakers. The Heritage range are Klipsch's iconic hand-built American speakers, including the Cornwall, Heresy and horn-loaded La Scala, some in production for decades. Below you can see the main specs of these speakers.
See all 10 Klipsch Heritage models compared »
Klipsch Heritage Series Speakers
Klipsch Heritage Series Speakers
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Klipsch Heritage Rebellion Speaker
Klipsch Heritage Rebellion has a Frequency response range of 60-20k Hz at ±3dB and Power Range of up to 200 watts. With a minimum frequency of 60 Hz, Rebellion delivers moderate bass depth so depending on your use case, you might want to consider adding a subwoofer to your system.
Visit our Powered Subwoofers section to find out more about the available subwoofer options.
Here we have a comparison of how Rebellion's Low and High frequency values compare with the average, max and min Low and High frequency values in its class.
Low Frequency
Bookshelf Speakers
Klipsch Heritage Rebellion
High Frequency
Bookshelf Speakers
Klipsch Heritage Rebellion
Crossover frequency of the Klipsch Heritage Rebellion?
The Crossover frequency of the Rebellion is set to 715Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
Klipsch Heritage Rebellion's nominal impedance level is
8 ohms but can go down to as low as
3.3 ohms, and has a sensitivity of
95 dB.
Sensitivity
Bookshelf Speakers
Klipsch Heritage Rebellion
8 Ohms is pretty much the standard nominal impedance amongst stereo speakers and amplifiers so Klipsch Heritage Rebellion is not considered a difficult to drive speaker from nominal Impedance perspective.
Sensitivity
95dB of the Klipsch Heritage Rebellion is considered a high sensitivity compared to average stereo speaker which makes Rebellion an easy to drive from Sensitivity perspective. If you are planning to power your speaker with a Tube amp which are generally very low power, the Klipsch Heritage Rebellion will be a good choice.
Minimum Impedance of the Klipsch Heritage Rebellion
Even though the nominal impedance of the Rebellion is 8 ohms, the minimum impedance level of this speaker according to Klipsch is 3.3 ohms Klipsch Heritage Rebellion so while choosing an amplifier, you should ideally check if the unit you are considering can provide this impedance level.
Browse all integrated amplifiers
Input Type
Rebellion features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
Klipsch Heritage Rebellion External Dimensions and Weight
Klipsch Heritage Rebellion has external dimensions of (Height x Width x Depth) 19-1/8 x 12 x 9-3/4inch (485.0 x 305.0 x 247.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Klipsch Heritage Rebellion is approximately 753.4cm2 / 116.8inch2.
WeightThe Klipsch Heritage Rebellion weighs 14.51kg / 31.9lbs per piece. Here is a comparison of how Rebellion's weight compares with the average, max and min weights in its class.
Weight
All Bookshelf Speakers
Klipsch Heritage Rebellion
Cabinet type and Materials
Klipsch Heritage Rebellion has a
Bass Reflex type cabinet and a 18 mm MDF with real wood veneer finish. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Port Position
Klipsch Heritage Rebellion is a rear-firing port speaker so you have to make sure you leave enough space between the back of the speaker and wall or bookshelf so that it has room to breathe.
Available colors
Klipsch Heritage Rebellion is available in Black Ash and Walnut.
Wall Mounting
Rebellion doesn't sport any built-in mounting bracket, so you need an external structure to mount it on walls.
Does the Klipsch Heritage Rebellion come with a Grille?
Rebellion comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Klipsch Heritage Rebellion.
- Speaker Cable and Connectors
- Vibration Isolators: IsoAcoustics isolators are our favorite isolators but you may find more affordable options too.
- Acoustic Panels and Treatments: Your room is as important as your stereo equipment so acoustic treatments goes a long way in improving the overall performance.
- Speaker Stands: Stands bring your bookshelf speakers to ideal height (rule of thumb is to have the tweeter level with your ear in your listening position), helps stability and acoustical isolation.
Official Product Page
Official manufacturer's product page for the Klipsch Heritage Rebellion speaker can be found below:
Official Product Page for Klipsch Heritage Rebellion
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.