Bowers & Wilkins 607 S3 is a 2-way Passive Bass Reflex Bookshelf speaker by Bowers Wilkins. It features a 1" Decoupled Double Dome Titanium Tweeter and 1 x 5" Continuum Woofer. The speaker has a frequency range of 52-28k Hz and a sensitivity of 84 dB. B&W 607 S3 has an MSRP of 900$ per pair.
What size of room is the B&W 607 S3 speaker good for?
The size of the room in which you are planning to use the B&W 607 S3 is an important decision factor. Here we have evaluated its suitability to various sizes of environments considering its size and max power parameters:
|Very Large Room
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Bowers Wilkins replaced the older 607 S2 AE with this model. Follow the link to read our detailed comparison of these models:
Compare B&W 607 S3 vs B&W 607 S2
What are the speakers in Bowers Wilkins's 600 S3 Series?
607 S3 is a member of Bowers Wilkins's 600 S3 series of Passive speakers. Below you can see the main specs of these speakers.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
What is the Frequency Response of the B&W 607 S3 speaker?
B&W 607 S3 has a Frequency response range of 52-28k Hz at ±3dB and Power Range of 30-100 watts. At a minimum frequency of 52 Hz, 607 S3 will provide an average bass depth so depending on your use case, you may consider supplementing your system with a subwoofer.
To focus on the subwoofers that are in a similar price range with B&W 607 S3, check out the Powered Subwoofers under $1000. Alternatively, find the Full list of Powered Subwoofers regardless of the price.
Here we have a comparison of how 607 S3's Low and High frequency values compare with the average, max and min Low and High frequency values in its class.
What are the Impedance and Sensitivity of the B&W 607 S3? Is it an easy-to-drive speaker?
B&W 607 S3's nominal impedance level is 8 ohms
but can go down to as low as 3.0 ohms
, and has a sensitivity of 84 dB
8 Ohms is pretty much the standard nominal impedance amongst stereo speakers and amplifiers so Bowers & Wilkins 607 S3 is not considered a difficult to drive speaker from nominal Impedance perspective.
With a sensitivity level of only 84 dB, Bowers & Wilkins 607 S3 is a difficult to drive speaker from Sensitivity perspective, make sure to choose an amplifier with a high output if you like listening to your music at high volume levels. You may especially have a hard time using Tube amplifiers which are traditionally very low power compared to Class A/B or Class D amps.
Minimum Impedance of B&W 607 S3
Even though the nominal impedance of the 607 S3 is 8 ohms, the minimum impedance level of this speaker according to Bowers Wilkins is 3.0 ohms Bowers & Wilkins 607 S3 so while choosing an amplifier, you should ideally check if the unit you are considering can provide this impedance level.
Check the amplifiers that are in a similar price range to the B&W 607 S3:
607 S3 has Binding post type connectors and lets bi-amping/bi-wiring. Bi-wiring can provide improvements in the overall transparency of your loudspeakers by running separate speaker wires to the low & high frequency drivers from a single amplifier. Bi-amping allows the use of separate amplifiers for the high & low frequency drivers of your loudspeaker which may result in greater dynamic range & lower distortion.
B&W 607 S3 External Dimensions and Weight
B&W 607 S3 has external dimensions of (Height x Width x Depth) 11.8 x 6.5 x 9.3inch (300.0 x 166.0 x 235.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of B&W 607 S3 is approximately 390.1cm2 / 60.5inch2.
To get a better perspective on the real life size of B&W 607 S3, let's compare it with a standard size Compact Disc which has a diameter of 4.7inch (120mm).
Here we place the B&W 607 S3 virtually next to a standard width amplifier and turntable on a BDI Octave Media Cabinet to get a better idea about the size.
The B&W 607 S3 weighs 4.65kg / 10.2lbs per piece. Here is a comparison of how 607 S3's weight compares with the average, max and min weights in its class.
All Bookshelf Speakers
Bookshelf Speakers under $1000
Cabinet type and Materials
B&W 607 S3 has a Bass Reflex
type cabinet and a MDF/Vinyl finish. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
B&W 607 S3 comes with 8 Self-adhesive rubber feet
which you can use to secure your loudspeaker on the surface that you are putting on. It is always recommended to use some kind of feet under all types of speakers. Besides limiting the movement of the speakers, it also compensates for non-flat surfaces and limits the contact surface area of the speaker. Rubber based feet also help isolating the vibrations within certain frequency ranges.
B&W 607 S3 is a rear-firing port speaker so you have to make sure you leave enough space between the back of the speaker and wall or bookshelf so that it has room to breathe. 607 S3 comes with 2 Two-piece foam port plugs
so if you don't have any choice but place the speakers too close to the walls or other surfaces, you can use these plugs in order to avoid boomy or too much bass.
B&W 607 S3 is available in Matte Black, Matte White, Oak and Red Cherry.
607 S3 doesn't sport any built-in mounting bracket, so you need an external structure to mount it on walls.
Bowers Wilkins sells a dedicated speaker stand for the 607 S3 with a model name Bower Wilkins FS-600 S3
. You can check the latest price and availability of these stands at B&H PHOTO
Does the B&W 607 S3 come with a Grille?
607 S3 comes with magnetic grilles in Black and Grey color choices. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible. Since the included grille of the 607 S3 is magnetic type, it is very easy to put it on and off.
What's in the Box of B&W 607 S3?
Here are the items that are included inside the box of 607 S3:
2 Bookshelf loudspeakers 2 Grilles 2 Two-piece foam port plugs 8 Self-adhesive rubber feet 4 Jumper-straps (pre-installed) Manual Bowers & Wilkins brochure Warranty Information
Here is a list of accessories that we think you may need for the Bowers & Wilkins 607 S3.
- Speaker Cable and Connectors
- Vibration Isolators: IsoAcoustics isolators more affordable options too.
- Acoustic Panels and Treatments: Your room is as important as your stereo equipment so acoustic treatments goes a long way in improving the overall performance.
- Speaker Stands: Stands bring your bookshelf speakers to ideal height (rule of thumb is to have the tweeter level with your ear in your listening position), helps stability and acoustical isolation.
For more information about how to setup, use and maintain the Bowers & Wilkins 607 S3, use the direct link below to download the official manual document:
Download User Manual for B&W 607 S3
Here is a link to download the official brochure for the Bowers & Wilkins 607 S3 speaker:
Official Brochure for B&W 607 S3
Official Product Page
Official manufacturer's product page for the Bowers & Wilkins 607 S3 speaker can be found below:
Official Product Page for B&W 607 S3
5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.