Klipsch Heritage Klipschorn 80th Anniversary is a 2-way Passive Horn Loaded Floor-standing speaker by Klipsch. It was released in 2026. It features a Compression Horn Tweeter and 1 x 15" Paper Woofer.
An 80th-anniversary Klipschorn in tigerwood veneer: the corner-loaded, fully horn-loaded design from 1946 with a K-331-E 15 inch woofer and the K-692 compression driver, 103 dB sensitive.
The speaker has a frequency range of 34-20k Hz and a sensitivity of 103 dB.
Room Size Suitability
The size of the room where you plan to use the Klipsch Heritage Klipschorn 80th Anniversary is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Are you nuts? |
| Small Room | Poor |
| Mid-size Room | Average |
| Large Room | Good |
| Very Large Room | Good |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Klipsch's Heritage Series of Loudspeakers
Klipschorn 80th is a member of Klipsch's Heritage series of Passive speakers. The Heritage range are Klipsch's iconic hand-built American speakers, including the Cornwall, Heresy and horn-loaded La Scala, some in production for decades. Below you can see the main specs of these speakers.
See all 10 Klipsch Heritage models compared »
Klipsch Heritage Series Speakers
Klipsch Heritage Series Speakers
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Klipsch Heritage Klipschorn 80th Anniversary Speaker
Klipsch Heritage Klipschorn 80th Anniversary has a Frequency response range of 34-20k Hz at ±3dB and Power Range of 100-400 watts. With a minimum frequency of 34 Hz, Klipschorn 80th delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Visit our Powered Subwoofers section to find out more about the available subwoofer options.
Here we have a comparison of how Klipschorn 80th's Low and High frequency values compare with the average, max and min Low and High frequency values in its class.
Low Frequency
Floor-standing Speakers
Klipsch Heritage Klipschorn 80th Anniversary
High Frequency
Floor-standing Speakers
Klipsch Heritage Klipschorn 80th Anniversary
Crossover frequency of the Klipsch Heritage Klipschorn 80th Anniversary?
The Crossover frequency of the Klipschorn 80th is set to 350Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
Klipsch Heritage Klipschorn 80th Anniversary's nominal impedance level is
8 ohms but can go down to as low as
4 ohms, and has a sensitivity of
103 dB.
Sensitivity
Floor-standing Speakers
Klipsch Heritage Klipschorn 80th Anniversary
8 Ohms is pretty much the standard nominal impedance amongst stereo speakers and amplifiers so Klipsch Heritage Klipschorn 80th Anniversary is not considered a difficult to drive speaker from nominal Impedance perspective.
Sensitivity
103dB of the Klipsch Heritage Klipschorn 80th Anniversary is considered a high sensitivity compared to average stereo speaker which makes Klipschorn 80th an easy to drive from Sensitivity perspective. If you are planning to power your speaker with a Tube amp which are generally very low power, the Klipsch Heritage Klipschorn 80th Anniversary will be a good choice.
Minimum Impedance of the Klipsch Heritage Klipschorn 80th Anniversary
Even though the nominal impedance of the Klipschorn 80th is 8 ohms, the minimum impedance level of this speaker according to Klipsch is 4 ohms Klipsch Heritage Klipschorn 80th Anniversary so while choosing an amplifier, you should ideally check if the unit you are considering can provide this impedance level.
Browse all integrated amplifiers
Input Type
Klipschorn 80th features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
Klipsch Heritage Klipschorn 80th Anniversary External Dimensions and Weight
Klipsch Heritage Klipschorn 80th Anniversary has external dimensions of (Height x Width x Depth) 51-15/16 x 31-1/2 x 24inch (1320.0 x 800.0 x 610.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Klipsch Heritage Klipschorn 80th Anniversary is approximately 4880.0cm2 / 756.4inch2.
WeightThe Klipsch Heritage Klipschorn 80th Anniversary weighs 65.70kg / 144.5lbs per piece. Here is a comparison of how Klipschorn 80th's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Klipsch Heritage Klipschorn 80th Anniversary
Cabinet type and Materials
Klipsch Heritage Klipschorn 80th Anniversary has a
Horn Loaded type cabinet and a 19 mm MDF with real wood veneer finish.
Port Position
Klipsch Heritage Klipschorn 80th Anniversary is a front-firing port speaker , which gives you more flexibility compared to rear firing speakers when you need to place it close against a wall or other surfaces.
Available colors
Klipsch Heritage Klipschorn 80th Anniversary is available in Tigerwood.
Does the Klipsch Heritage Klipschorn 80th Anniversary come with a Grille?
Klipschorn 80th comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Klipsch Heritage Klipschorn 80th Anniversary.
Official Product Page
Official manufacturer's product page for the Klipsch Heritage Klipschorn 80th Anniversary speaker can be found below:
Official Product Page for Klipsch Heritage Klipschorn 80th Anniversary
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.