Klipsch Heritage Jubilee is a 2-way Passive Horn Loaded Floor-standing speaker by Klipsch. It was released in 2022. It features a 7" Compression Horn Tweeter and 2 x 12" Fibre composite Woofer.
Paul W. Klipsch's last project, finished decades later: a fully horn-loaded two-box system. Dual K-283 12 inch woofers below, a K-693 compression driver with a 5 inch voice coil above, crossed at 340 Hz and driven through an external active crossover. The LF section is 8 ohms and 107 dB, the HF section 16 ohms and 110 dB; the LF figures are the ones stored here. 125 dB maximum, and 185 kg for the pair of boxes that make one speaker.
The speaker has a frequency range of 18-20k Hz and a sensitivity of 107 dB.
Room Size Suitability
The size of the room where you plan to use the Klipsch Heritage Jubilee is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Are you nuts? |
| Small Room | Poor |
| Mid-size Room | Average |
| Large Room | Good |
| Very Large Room | Good |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Klipsch's Heritage Series of Loudspeakers
Jubilee is a member of Klipsch's Heritage series of Passive speakers. The Heritage range are Klipsch's iconic hand-built American speakers, including the Cornwall, Heresy and horn-loaded La Scala, some in production for decades. Below you can see the main specs of these speakers.
See all 10 Klipsch Heritage models compared »
Klipsch Heritage Series Speakers
Klipsch Heritage Series Speakers
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Klipsch Heritage Jubilee Speaker
Klipsch Heritage Jubilee has a Frequency response range of 18-20k Hz at ±3dB and Power Range of 300-1200 watts. With a minimum frequency of 18 Hz, Jubilee delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Visit our Powered Subwoofers section to find out more about the available subwoofer options.
Here we have a comparison of how Jubilee's Low and High frequency values compare with the average, max and min Low and High frequency values in its class.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
Crossover frequency of the Klipsch Heritage Jubilee?
The Crossover frequency of the Jubilee is set to 340Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
Klipsch Heritage Jubilee's nominal impedance level is
8 ohms but can go down to as low as
3.5 ohms, and has a sensitivity of
107 dB.
Sensitivity
Floor-standing Speakers
8 Ohms is pretty much the standard nominal impedance amongst stereo speakers and amplifiers so Klipsch Heritage Jubilee is not considered a difficult to drive speaker from nominal Impedance perspective.
Sensitivity
107dB of the Klipsch Heritage Jubilee is considered a high sensitivity compared to average stereo speaker which makes Jubilee an easy to drive from Sensitivity perspective. If you are planning to power your speaker with a Tube amp which are generally very low power, the Klipsch Heritage Jubilee will be a good choice.
Minimum Impedance of the Klipsch Heritage Jubilee
Even though the nominal impedance of the Jubilee is 8 ohms, the minimum impedance level of this speaker according to Klipsch is 3.5 ohms Klipsch Heritage Jubilee so while choosing an amplifier, you should ideally check if the unit you are considering can provide this impedance level.
Browse all integrated amplifiers
Input Type
Jubilee features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
Klipsch Heritage Jubilee External Dimensions and Weight
Klipsch Heritage Jubilee has external dimensions of (Height x Width x Depth) 69 x 50 x 30-1/4inch (1753.0 x 1270.0 x 768.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Klipsch Heritage Jubilee is approximately 9753.6cm2 / 1,511.8inch2.
WeightThe Klipsch Heritage Jubilee weighs 185.00kg / 407lbs per piece. Here is a comparison of how Jubilee's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Cabinet type and Materials
Klipsch Heritage Jubilee has a
Horn Loaded type cabinet.
Port Position
Klipsch Heritage Jubilee is a front-firing port speaker , which gives you more flexibility compared to rear firing speakers when you need to place it close against a wall or other surfaces.
Does the Klipsch Heritage Jubilee come with a Grille?
Jubilee comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Klipsch Heritage Jubilee.
Official Product Page
Official manufacturer's product page for the Klipsch Heritage Jubilee speaker can be found below:
Official Product Page for Klipsch Heritage Jubilee
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.