In this review, we will be comparing two different type of speakers by Revel. Revel Performa3 C205 is a Center Channel speaker whereas the M106 is a Bookshelf speaker.
Let's have a brief look at the main features
of Revel Performa3 C205 and Revel M106 first before getting into our more
detailed comparison.
Revel Performa3 C205 and M106 are members of Revel's Performa3 series of speakers. Below you can find the loudspeakers from this series.
Revel Performa3 Series History
What size room are the Revel Performa3 C205 and Revel M106 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Revel Performa3 C205 and Revel M106 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Revel Performa3 C205 and M106 are 2-way speakers.
| Driver |
Revel Performa3 C205 |
Revel M106 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 5.25-inch
|
1 x 6.5-inch
|
Revel Performa3 C205 features a 1" aluminum dome with proprietary acoustic lens and waveguide Tweeter and 2 x 5.25" aluminum cone with cast frames Woofer . On the other hand, the M106 features a 1" aluminum Hard-Dome with Acoustic Lens Waveguide Tweeter and 1 x 6.5" Aluminum Woofer with a Crossover frequency at 2300Hz.
Frequency Response
Revel Performa3 C205 has a frequency range of 80Hz- 20kHz whereas M106 has a frequency range of 59Hz- 20kHz. With a minimum frequency of 59Hz, the M106 can go significantly deeper on the low side and provide stronger bass compared to the Revel Performa3 C205's min frequency of 80Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Revel Performa3 C205 and M106 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Revel Performa3 C205 sensitivity is rated at 89 dB and the M106's is at 87 dB. This 2 dB difference makes the Revel Performa3 C205 a more sensitive speaker compared to Revel M106, hence will play louder with the same amount of watts.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Revel Performa3 C205 can handle a max power of 150 watts RMS from the amp the whereas Revel Performa3 C205 has a max power handling value of 120 watts RMS , 30 watts less than the M106.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Revel Performa3 C205 features Binding post type posts and M106 has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Revel Performa3 C205's Binding post terminals
Revel M106's Binding post terminals
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Revel Performa3 C205's and Revel M106's external dimensions. Revel Performa3 C205 has external dimensions of 207.0 x 535.0 x 294.0mm ( 8-1/8 x 21-1/16 x 11-9/16inch) whereas Revel M106 has external dimensions of 383.0 x 210.0 x 280.0mm ( 15-1/16 x 8-1/4 x 11inch) .
Revel M106 is 325mm narrower and 14mm less deeper than Revel Performa3 C205 but it is also 176mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Revel Performa3 C205 is approximately 1572.9cm2 / 243.8inch2 and base area of the Revel M106 is approximately 588.0cm2 / 91.1inch2. The Revel Performa3 C205 requires 168% more surface area than the M106 which gives it a small disadvantage on placement in tight spaces.
What's in the Box of Revel Performa3 C205?
Here are the items that are included inside the box of Revel Performa3 C205:
Center-channel loudspeakerGrille2 Short feet2 Long feetOwners Manual
What's in the Box of Revel M106?
Here are the items that come with the M106:
Bookshelf loudspeakerGrilleFoam port plugOwners Manual