SpeakerDecision
  • SPEAKERS by TYPE
    • Passive Bookshelf Speakers
    • Passive Floor-standing Speakers
    • Passive Center Channel Speakers
    • Passive In-wall Speakers
    • All Passive Speakers
    • Powered Subwoofers
    • Powered Stereo Speakers
  • AMPLIFIERS
Bowers Wilkins Bowers & Wilkins 706 S2 Review
Bowers & Wilkins 706 S2

Main Features

  • 1" Decoupled Soft-Dome Tweeter
  • 6.5" Continuum Woofer
  • 50-28k Hz Frequency Response
  • 88 dB Sensitivity
  • Impedance: 8ohms
  • Power Range: 30-120watts
  • Weight:17.71 lbs / 8.05 kg
  • Dimensions(HxWxD): 13.5"x7.8"x11." / 340.0 x 200.0 x 301.0mm
CHECK PRICE
CHECK PRICE

Compare To

x
Add a Speaker for comparison
B&W 706 S2 Review

Bowers & Wilkins 706 S2 is a 2-way Passive Bass Reflex Bookshelf speaker by Bowers Wilkins. It features a 1" Decoupled Soft-Dome Tweeter and 1 x 6.5" Continuum Woofer. The speaker has a frequency range of 50-28k Hz and a sensitivity of 88 dB. B&W 706 S2 has an MSRP of 1999$ per pair.

What size of room is the B&W 706 S2 speaker good for?

The size of the room in which you are planning to use the B&W 706 S2 is an important decision factor. Here we have evaluated its suitability to various sizes of environments considering its size and max power parameters:

Listening Environment* Suitability
Near-fieldPoor
Small RoomAverage
Mid-size RoomGood
Large RoomAverage
Very Large RoomPoor

(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2. Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)

Bowers Wilkins later replaced 706 S2 with 706 S3. Follow the link to read our in-depth comparison of these speakers:
Compare B&W 706 S2 vs B&W 706 S3

What are the speakers in Bowers Wilkins's 700 S2 Anniversary Edition Series?

706 S2 is a member of Bowers Wilkins's 700 S2 Anniversary Edition series of Passive speakers. Below you can see the main specs of these speakers.

Bowers Wilkins 700 S2 Anniversary Edition Series Speakers
Model Frequency SensitivityImpedance Woofer
B&W 706 S2
50-28k Hz 88 dB8Ω 1 x 6.5"
B&W 703 S2
Compare
46-28k Hz 89 dB8Ω 2 x 6.5"
B&W 704 S2
Compare
48-28k Hz 88 dB8Ω 2 x 5"
B&W 705 S2
Compare
50-28k Hz 88 dB8Ω 1 x 6.5"
B&W 707 S2
Compare
50-28k Hz 84 dB8Ω 1 x 5"
B&W 702 S2
Compare
46-28k Hz 90 dB8Ω 3 x 6.5"
BW HTM71 S2
Compare
50-28k Hz 89 dB8Ω 2 x 6.5"
BW HTM72 S2
Compare
70-28k Hz 87 dB8Ω 2 x 5"


**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.

What is the Frequency Response of the B&W 706 S2 speaker?

B&W 706 S2 has a Frequency response range of 50-28k Hz at ±3dB and Power Range of 30-120 watts. At a minimum frequency of 50 Hz, 706 S2 will provide an average bass depth so depending on your use case, you may consider supplementing your system with a subwoofer.

To focus on the subwoofers that are in a similar price range with B&W 706 S2, check out the Powered Subwoofers under $2000. Alternatively, find the Full list of Powered Subwoofers regardless of the price.
Here we have a comparison of how 706 S2's Low and High frequency values compare with the average, max and min Low and High frequency values in its class.
Low Frequency
Bookshelf Speakers
B&W 706 S2
Min
Average
Max
High Frequency
Bookshelf Speakers
B&W 706 S2
Min
Average
Max
B&W 706 S2 Woofer
B&W 706 S2's Continuum Woofer



What are the Impedance and Sensitivity of the B&W 706 S2? Is it an easy-to-drive speaker?

B&W 706 S2's nominal impedance level is 8 ohms but can go down to as low as 3.7 ohms, and has a sensitivity of 88 dB.

Sensitivity
Bookshelf Speakers
B&W 706 S2
Min
Average
Max

8 Ohms is pretty much the standard nominal impedance amongst stereo speakers and amplifiers so Bowers & Wilkins 706 S2 is not considered a difficult to drive speaker from nominal Impedance perspective.

Sensitivity

88dB of Bowers & Wilkins 706 S2 is an average sensitivity for stereo speaker so it is neither easy nor difficult to drive Sensitivity wise.

Minimum Impedance of B&W 706 S2

Even though the nominal impedance of the 706 S2 is 8 ohms, the minimum impedance level of this speaker according to Bowers Wilkins is 3.7 ohms Bowers & Wilkins 706 S2 so while choosing an amplifier, you should ideally check if the unit you are considering can provide this impedance level.

Check the amplifiers that are in a similar price range to the B&W 706 S2:

  • Integrated Amps under 1500 USD
  • Integrated Amps under 2000 USD
  • Integrated Amps under 3000 USD
  • All Integrated Amplifiers

Input Type

706 S2 has Binding post type connectors and lets bi-amping/bi-wiring. Bi-wiring can provide improvements in the overall transparency of your loudspeakers by running separate speaker wires to the low & high frequency drivers from a single amplifier. Bi-amping allows the use of separate amplifiers for the high & low frequency drivers of your loudspeaker which may result in greater dynamic range & lower distortion.

B&W 706 S2 External Dimensions and Weight

B&W 706 S2 has external dimensions of (Height x Width x Depth) 13.5-inch x 7.8-inch x 11.-inch (340.0 x 200.0 x 301.0mm ).

Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited. The base area of B&W 706 S2 is approximately 602.0cm2 / 93.3inch2.

To get a better perspective on the real life size of B&W 706 S2, let's compare it with a standard size Compact Disc which has a diameter of 4.7inch (120mm).

B&W 706 S2 Real Life Body Size Comparison
B&W 706 S2 Speaker Size Compared to a Compact Disc

Here we place the B&W 706 S2 virtually next to a standard width amplifier and turntable on a BDI Octave Media Cabinet to get a better idea about the size.

B&W 706 S2 placed next to an amplifier and turntable
B&W 706 S2 Speaker next to an amplifier and turntable

Weight

The B&W 706 S2 weighs 8.05kg / 17.7lbs per piece. Here is a comparison of how 706 S2's weight compares with the average, max and min weights in its class.

Weight
All Bookshelf Speakers
B&W 706 S2
Min
Average
Max
Weight
Bookshelf Speakers under $2000
B&W 706 S2
Min
Average
Max

How does the B&W 706 S2 compare to the Bowers Wilkins 705 S2?

One of the natural alternative to the B&W 706 S2 is the 705 S2 which is located one step higher in Bowers Wilkins's Passive Bookshelf selection.

Check the Detailed Comparison of B&W 706 S2 vs 705 S2 for more details.

Cabinet type and Materials

B&W 706 S2 has a Bass Reflex type cabinet and a MDF/Wood Veneer finish. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.

Speaker Feet

B&W 706 S2 comes with 8 Self-adhesive rubber feet which you can use to secure your loudspeaker on the surface that you are putting on.

It is always recommended to use some kind of feet under all types of speakers. Besides limiting the movement of the speakers, it also compensates for non-flat surfaces and limits the contact surface area of the speaker. Rubber based feet also help isolating the vibrations within certain frequency ranges.

Port Position

B&W 706 S2 is a rear-firing port speaker so you have to make sure you leave enough space between the back of the speaker and wall or bookshelf so that it has room to breathe. 706 S2 comes with 2 Two-piece foam port plugs so if you don't have any choice but place the speakers too close to the walls or other surfaces, you can use these plugs in order to avoid boomy or too much bass.

Available colors

B&W 706 S2 is available in Rosewood, Gloss Black and Satin White.

Wall Mounting

706 S2 doesn't sport any built-in mounting bracket, so you need an external structure to mount it on walls.

Does the B&W 706 S2 come with a Grille?

706 S2 comes with magnetic grilles in Black and Grey (Satin White only color choices. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible. Since the included grille of the 706 S2 is magnetic type, it is very easy to put it on and off.

B&W 706 S2  with Grille
B&W 706 S2 with Grille

What's in the Box of B&W 706 S2?

Here are the items that are included inside the box of 706 S2:
  • 2 Bookshelf loudspeakers
  • 2 Grilles
  • 2 Two-piece foam port plugs
  • 8 Self-adhesive rubber feet
  • 4 Jumper-straps
  • Manual
  • Bowers & Wilkins brochure
  • Warranty Information
  • User's Manual

    For more information about how to setup, use and maintain the Bowers & Wilkins 706 S2, use the direct link below to download the official manual document:
    Download User Manual for B&W 706 S2

    Official Brochure

    Here is a link to download the official brochure for the Bowers & Wilkins 706 S2 speaker:
    Official Brochure for B&W 706 S2

    Official Product Page

    Official manufacturer's product page for the Bowers & Wilkins 706 S2 speaker can be found below:
    Official Product Page for B&W 706 S2

    Warranty

    5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.

    Bowers & Wilkins 706 S2 Alternatives in Passive Bookshelf Speakers
    Model Type Sensitivity Impedance Frequency
    Wharfedale LINTON
    Compare
    3-way 90 dB 6 ohms 40-20k Hz
    Buchardt S400 MKII
    Compare
    2-way 88 dB 4 ohms 33-40k HZ
    Wharfedale EVO4.2
    Compare
    3-way 88 dB 8 ohms 54-22k Hz
    KEF R3
    Compare
    3-way 87 dB 8 ohms 52-28k Hz
    B&W 706 S3
    Compare
    2-way 88 dB 8 ohms 50-28k Hz
    Monitor Audio Silver 100 7G
    Compare
    2-way 87.5 dB 8 ohms 35-35k Hz
    Buchardt P300
    Compare
    2-way 86 dB 4 ohms 37-40k HZ
    Polk L200
    Compare
    2-way 85.5 dB 4 ohms 46-38k Hz
    DALI Opticon 1 II
    Compare
    2-way 86 dB 4 ohms 62-26k Hz
    JBL HDI-1600
    Compare
    2-way 85 dB 4 ohms 40-30k Hz
    Frequently Asked Questions about Bowers & Wilkins 706 S2
    What is the External Dimensions of Bowers & Wilkins 706 S2
    What is the Speaker Sensitivity of Bowers & Wilkins 706 S2
    is the Bowers & Wilkins 706 S2 an easy to drive speaker?



    B&W 706 S2 Detailed Specifications

    General
    BrandBowers Wilkins
    Full Model NameBowers & Wilkins 706 S2
    Speaker Type2-way Bookshelf
    Power Range30-120 watts
    Sensitivity88 dB
    Impedance8 ohms
    Frequency Response50-28k Hz
    DRIVERS
    Woofer Size6.5-inch
    Woofer CompositionContinuum
    Woofer SurroundRubber
    Tweeter Size1-inch
    Tweeter TypeDecoupled Soft-Dome
    Port Positionrear

    CONNECTIONS
    Connector TypeBinding post
    Biamp InputsYes
    Port Positionrear
    PHYSICAL SPECS
    Height340.0mm ( 13.5-inch)
    Width200.0mm ( 7.8-inch)
    Depth301.0mm ( 11.-inch)
    Height340.0mm ( 13.5-inch)
    Weight8.05kg ( 17.71 lbs)
    EnclosureBass Reflex
    FinishMDF/Wood Veneer
    Available ColorsRosewood, Gloss Black, Satin White
    Mounting BracketNo
    Recommended Stand Height24-26
    GrilleYes
    Moisture ResistanceNo
    OTHER
    Handheld RemoteNo
    Parts Warranty5 Years
    Labor Warranty5 Years
    LATEST BLOG POSTS

    In-wall Speakers Added to Our Reviews and Comparisons
    Cambridge Audio CXA61 and CXA81 Amps now available in Black 
    Klipsch Unveils New Reference Premiere Subwoofers
    ELAC Varro Series of Subwoofers are here!
    KEF R7 Meta Review by Steve Guttenberg
    Top 10 Powered Stereo Speakers with HDMI Input for your TV in 2023


    Latest Passive Bookshelf Speakers
    Mission 700
    Mission 700
    2-way Bookshelf | 86 dB | 8 ohms
    Wharfedale Dovedale
    Wharfedale Dovedale
    3-way Bookshelf | 89 DB | 6.5 ohms
    KEF Reference 1 Meta
    KEF Reference 1 Meta
    3-way Bookshelf | 85 dB | 4 ohms
    Focal Vestia No1
    Focal Vestia No1
    2-way Bookshelf | 89.5 dB | 8 ohms
    KEF R3 Meta
    KEF R3 Meta
    3-way Bookshelf | 87 dB | 4 ohms
    MartinLogan Motion® MP10
    MartinLogan Motion MP10
    2-way Bookshelf | 92 dB | 5 ohms
    MartinLogan Motion® B10
    MartinLogan Motion B10
    2-way Bookshelf | 92 dB | 5 ohms
    MartinLogan Motion® XT B100
    MartinLogan Motion XT B100
    2-way Bookshelf | 93 dB | 4 ohms
    SVS Prime Satellite
    SVS Prime Satellite
    2-way Bookshelf | 85 dB | 8 ohms
    Polk Audio Reserve R200 50th Anniversary Edition
    Polk R200 50th AE
    2-way Bookshelf | 86 dB | 8 ohms


    Copyright © 2023 by SpeakerDecision
    About Privacy Camera Decision