SpeakerDecision
  • SPEAKERS by TYPE
    • Passive Bookshelf Speakers
    • Passive Floor-standing Speakers
    • Passive Center Channel Speakers
    • Passive In-wall Speakers
    • All Passive Speakers
    • Powered Subwoofers
    • Powered Stereo Speakers
  • AMPLIFIERS
  • SMART FIND

B&W 707 S2 vs B&W 706 S2 Comparison

x
Speaker to replace
Change

B&W 707 S2

Passive Bookshelf | 50-28k Hz

Bowers & Wilkins 707 S2
CHECK PRICE
Change
    
B&W 706 S2

Passive Bookshelf | 50-28k Hz

Bowers & Wilkins 706 S2
CHECK PRICE
B&W 707 S2 B&W 707 S2
See at AMAZON
B&W 706 S2 B&W 706 S2
See at AMAZON
B&W 707 S2
See at AMAZON
B&W 706 S2
See at AMAZON
B&W 707 S2 vs B&W 706 S2 Speaker Comparison

In this review, we will be comparing 707 S2 and 706 S2, two Passive Bookshelf speakers by Bowers Wilkins

Let's have a brief look at the main features of B&W 707 S2 and B&W 706 S2 first before getting into our more detailed comparison.

B&W 707 S2 Key Specs

  • 2-way Design
  • 1" Decoupled Soft-Dome Tweeter
  • 5" Continuum Woofer
  • 50-28k Hz Frequency Response
  • 84 dB Sensitivity
  • Impedance: 8ohms
  • Power Range:30-100watts
  • Weight:6.00kg
  • Dimensions (H x W x D): 280.0" x 6.5" x 10.9"( 280.0 x 165.0 x 276.0mm )

B&W 706 S2 Key Specs

  • 2-way Design
  • 1" Decoupled Soft-Dome Tweeter
  • 6.5" Continuum Woofer
  • 50-28k Hz Frequency Response
  • 88 dB Sensitivity
  • Impedance: 8ohms
  • Power Range:30-120watts
  • Weight:8.05kg
  • Dimensions (H x W x D): 340.0" x 7.8" x 11."( 340.0 x 200.0 x 301.0mm )

707 S2 and 706 S2 are members of Bowers Wilkins's 700 S2 Anniversary Edition series of speakers. Below you can find the loudspeakers from this series.

Bowers Wilkins 700 S2 Anniversary Edition Series History
Model Body Frequency SensitivityImpedance Woofer
B&W 706 S2
Bookshelf 50-28k Hz 88 dB8Ω 1 x 6.5"
B&W 703 S2
  
Floor-standing 46-28k Hz 89 dB8Ω 2 x 6.5"
B&W 704 S2
  
Floor-standing 48-28k Hz 88 dB8Ω 2 x 5"
B&W 707 S2
Bookshelf 50-28k Hz 84 dB8Ω 1 x 5"
B&W 705 S2
  
Bookshelf 50-28k Hz 88 dB8Ω 1 x 6.5"
B&W 702 S2
  
Floor-standing 46-28k Hz 90 dB8Ω 3 x 6.5"
BW HTM71 S2
  
Center Channel 50-28k Hz 89 dB8Ω 2 x 6.5"
BW HTM72 S2
  
Center Channel 70-28k Hz 87 dB8Ω 2 x 5"

What size room are the B&W 707 S2 and B&W 706 S2 speakers good for?

The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:

Listening Environment* B&W 707 S2 B&W 706 S2
Near-field Average Poor
Small Room Good Average
Mid-size Room Average Good
Large Room Poor Average
Very Large Room Bad Poor

(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2. Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)

In the following sections, we will get into more detail in order to better understand how the B&W 707 S2 and B&W 706 S2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.


**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.


Drivers

Both 707 S2 and 706 S2 are 2-way speakers.

Driver B&W 707 S2 B&W 706 S2
Driver Setup 2-way 2-way
Tweeter 1-inch 1-inch
Midrange - -
Woofer 1 x 5-inch 1 x 6.5-inch

707 S2 features a 1" Decoupled Soft-Dome Tweeter and 1 x 5" Continuum Woofer . On the other hand, the 706 S2 features a 1" Decoupled Soft-Dome Tweeter and 1 x 6.5" Continuum Woofer .

Frequency Response

707 S2 and 706 S2 has exactly the same frequency range of 50-28k Hz.

Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.

Low Frequency

Bookshelf Speakers

707 S2
706 S2
Min
Average
Max
High Frequency

Bookshelf Speakers

B&W 707 S2
B&W 706 S2
Min
Average
Max

None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.

Impedance and Sensitivity

707 S2 and 706 S2 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. 707 S2 sensitivity is rated at 84 dB and the 706 S2's is at 88 dB. This 4 dB difference makes the B&W 706 S2 a more sensitive speaker compared to B&W 707 S2, hence will play louder with the same amount of watts.

Sensitivity

Bookshelf Speakers

707 S2
706 S2
Min
Average
Max

Power Range

Power range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.

707 S2 can handle a max power of 120 watts RMS from the amp the whereas 707 S2 has a max power handling value of 100 watts RMS , 20 watts less than the 706 S2.

Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters such as Impedance, sensitivity and system efficiencies.

Input Type and Bi-Amping / Bi-Wiring

Both 707 S2 and 706 S2 features dual binding post speaker terminals for bi-amping or bi-wiring.

Cabinet Type and Port Position

Both 707 S2 and 706 S2 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.

If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.

Physical Specs

Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare B&W 707 S2's and B&W 706 S2's external dimensions. B&W 707 S2 has external dimensions of 280.0 x 165.0 x 276.0mm ( 11-inch x 6.5-inch x 10.9-inch) whereas B&W 706 S2 has external dimensions of 340.0 x 200.0 x 301.0mm ( 13.5-inch x 7.8-inch x 11.-inch) .

B&W 706 S2 is clearly the larger of the two speakers. Its body is 35mm wider, 60mm taller and 25mm deeper than B&W 707 S2.

Below you can see the front view size comparison of B&W 707 S2 and B&W 706 S2 in scale.

B&W 707 S2 vs B&W 706 S2 Size Comparison - Front View
Comparison image of B&W 707 S2 and B&W 706 S2 Size and External Dimensions

Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited. The base surface area of the B&W 707 S2 is approximately 455.4cm2 / 70.6inch2 and base area of the B&W 706 S2 is approximately 602.0cm2 / 93.3inch2. The 707 S2 requires 24% less surface area than the 706 S2 which gives it a small advantage on placement in tight spaces.

Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:

B&W 707 S2 vs B&W 706 S2 Size Comparison on a Media Console
Size Comparison image of B&W 707 S2 and B&W 706 S2 on a Media Console
Weight Comparison

The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The B&W 707 S2 weighs 6.00kg / 13.2lbs and the B&W 706 S2 weighs 8.05kg / 17.7lbs. This makes the 706 S2 34% heavier than the 707 S2.

Here is a comparison of how 707 S2 and 706 S2's weights compare with the average, max and min weights in Passive Bookshelf class.

Weight
All Bookshelf Speakers
B&W 707 S2
B&W 706 S2
Min
Average
Max

What's in the Box of B&W 707 S2?

Here are the items that are included inside the box of 707 S2:
  • 2 Bookshelf loudspeakers
  • 2 Grilles
  • 2 Two-piece foam port plugs
  • 8 Self-adhesive rubber feet
  • 4 Jumper-straps
  • Manual
  • Bowers & Wilkins brochure
  • Warranty Information
  • What's in the Box of B&W 706 S2?

    Here are the items that come with the 706 S2:
  • 2 Bookshelf loudspeakers
  • 2 Grilles
  • 2 Two-piece foam port plugs
  • 8 Self-adhesive rubber feet
  • 4 Jumper-straps
  • Manual
  • Bowers & Wilkins brochure
  • Warranty Information

  • Reasons to choose Bowers & Wilkins 707 S2 over Bowers & Wilkins 706 S2
    Minimum Impedance 4.0 ohms vs 3.7 ohms Very low impedance levels puts more pressure on amplifier
    Height 280mm vs 340mm Easier to fit in smaller spaces
    Base Surface Area 455cm2 vs 602cm2 Takes less floor space
    Price per pair* 1599USD vs 1999USD costs less (*prices may change depending on the seller, location and time)

    Reasons to choose Bowers & Wilkins 706 S2 over Bowers & Wilkins 707 S2

    Max Input Power 120 watts vs 100 watts Handle more power from your amplifier
    Sensitivity 88 dB vs 84 dB Play louder with same amount of amplification power
    Woofer Size 6.5 inches vs 5 inches Larger woofer
    B&W 707 S2 vs B&W 706 S2 Specs Table
    Detailed comparison of specifications
    General Bowers & Wilkins 707 S2 Bowers & Wilkins 706 S2
    Brand Bowers Wilkins Bowers Wilkins
    Speaker Type Bookshelf speakers Bookshelf speakers
    Power Range 30-100 watts 30-120 watts
    Sensitivity 84 dB 88 dB
    Impedance 8 ohms 8 ohms
    Impedance 4.0 ohms 3.7 ohms
    Frequency Response 50-28k Hz 50-28k Hz
    Drivers
    Woofer Quantity 1 1
    Woofer Size 5" 6.5"
    Woofer Composition Continuum Continuum
    Woofer Surround Material Rubber Rubber
    Tweeter Size 1" 1"
    Tweeter Type Decoupled Soft-Dome Decoupled Soft-Dome
    Aimable Tweeter No No
    Midrange Driver No No
    Firing Direction rear rear
    Physical Specs
    Height 280.0mm (11") 340.0mm (13.4")
    Width 165.0mm (6.5") 200.0mm (7.9")
    Depth 276.0mm (10.9") 301.0mm (11.9")
    Weight 6.00kg (13.2lbs) 8.05kg (17.7lbs)
    Enclosure Bass Reflex Bass Reflex
    Finish MDF/Wood Veneer MDF/Wood Veneer
    Available Colors Rosewood, Gloss Black, Satin White Rosewood, Gloss Black, Satin White
    Mounting Bracket No No
    Recommended Stand Height 24-26" 24-26"
    Grille Yes Yes
    Moisture Resistancy No No
    Connections
    Biamp Inputs Yes Yes
    Other
    Parts Warranty 5 Years 5 Years
    Labor Warranty 5 Years 5 Years

    Most Popular Speakers
    Klipsch Reference R-51M
    Klipsch R-51M
    2-way | 93 dB | 8 ohms
    Wharfedale Elysian 2
    Wharfedale Elysian 2
    3-way | 89 dB | 4 ohms
    ELAC Debut 2.0 B6.2
    ELAC Debut 2.0 B6.2
    2-way | 87 dB | 6 ohms
    Bowers & Wilkins 606 S2 Anniversary Edition
    B&W 606 S2
    2-way | 88 dB | 8 ohms
    KEF Q150
    KEF Q150
    2-way | 86 dB | 8 ohms
    Klipsch Reference Premiere RP-500M
    Klipsch RP-500M
    2-way | 93 dB | 8 ohms
    Wharfedale EVO4.1
    Wharfedale EVO4.1
    2-way | 87 dB | 8 ohms
    Bowers & Wilkins 606
    B&W 606
    2-way | 88 dB | 8 ohms
    Copyright © 2025 by SpeakerDecision
    About Privacy Contact US Camera Decision

    Report a Correction