DALI Rubikore 6 is a 2-way Passive Bass Reflex Floor-standing speaker by DALI. It was released in May 2024. It features a 1.14" Hybrid dome + planar Tweeter and 2 x 6.5" Wood fibre Woofer.
DALI publishes the driver complement as: 2 x 6½ inch low/mid, 17 x 45 mm planar, 1 x 29 mm soft dome high frequency.
The speaker has a frequency range of 38-34k Hz and a sensitivity of 88.5 dB. DALI Rubikore 6 has an MSRP of 9000$ per pair.
DALI's Rubikore Series of Loudspeakers
Rubikore 6 is a member of DALI's Rubikore series of Passive speakers. Below you can see the main specs of these speakers.
See all 5 DALI Rubikore models compared »
DALI Rubikore Series Speakers
Frequency Response of the DALI Rubikore 6 Speaker
DALI Rubikore 6 has a Frequency response range of 38-34k Hz and Power Range of 40-200 watts. With a minimum frequency of 38 Hz, Rubikore 6 delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how Rubikore 6's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Floor-standing Speakers
Thinking about a subwoofer for the DALI Rubikore 6?
Among the speakers in our database with a max MSRP price of 10000$ (Pair), these are the 5 Passive Floor-standing speakers that have the deeper bass levels than the DALI Rubikore 6's 38Hz:
Crossover frequency of the DALI Rubikore 6?
The crossover frequency of the Rubikore 6 is set to 800 / 2600 / 14000Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
DALI Rubikore 6's nominal impedance level is
4 ohms and has a sensitivity of
88.5 dB.
Sensitivity
Floor-standing Speakers
Nominal Impedance of the 4 Ohms means that the DALI Rubikore 6 is a difficult to drive speaker from nominal Impedance perspective, make sure that you choose an amplifier than can provide 4 Ohms for this speaker.
Many AVRs (audio/video receiver) in the market may have difficulty when the speakers dip below the 4 Ohms levels (this may cause clipping or even physical damage), so we recommend to not pair the DALI Rubikore 6 with an AVR but use an Integrated Amplifier instead.
Sensitivity
89dB of the DALI Rubikore 6 is an average sensitivity for stereo speaker so it is neither easy nor difficult to drive Sensitivity wise. Work out how loud the DALI Rubikore 6 plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
What amplifier does the DALI Rubikore 6 need?
At normal listening levels in a medium room, about
19–200 W
per channel into 4 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? See every integrated amplifier we cover.
Input Type
Rubikore 6 has Binding post type connectors and lets bi-amping/bi-wiring. Bi-wiring can enhance the overall transparency of your loudspeakers by using separate speaker wires for the low and high-frequency drivers from a single amplifier. Bi-amping, on the other hand, involves using separate amplifiers for the high and low-frequency drivers, potentially resulting in a greater dynamic range and reduced distortion.
Work out what gauge speaker cable this run needs →
DALI Rubikore 6 External Dimensions and Weight
DALI Rubikore 6 has external dimensions of (Height x Width x Depth) (990 x 200 x 380 mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of DALI Rubikore 6 is approximately 760.0cm2 / 117.8inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
Cabinet type and Materials
DALI Rubikore 6 has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Does the DALI Rubikore 6 come with a Grille?
Rubikore 6 comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the DALI Rubikore 6.
Official Product Page
Official manufacturer's product page for the DALI Rubikore 6 speaker can be found below:
Official Product Page for DALI Rubikore 6
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.