Perlisten A3t is a 3-way Passive Bass Reflex Floor-standing speaker by Perlisten. It was released in 2023. It features a Tweeter and x " Woofer.
Tweeter: 35mm composite Teteron dome Woofers: (2) 215mm carbon fiber diaphragm
The speaker has a frequency range of 31-27k Hz and a sensitivity of 87.7 dB. Perlisten A3t has an MSRP of 4990$ per pair.
Room Size Suitability
The size of the room where you plan to use the Perlisten A3t is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Bad |
| Small Room | Poor |
| Mid-size Room | Average |
| Large Room | Good |
| Very Large Room | Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Perlisten A3t Speaker
Perlisten A3t has a Frequency response range of 31-27k Hz at ±3dB and Power Range of 50 – 300W watts. With a minimum frequency of 31 Hz, A3t delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how A3t's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Floor-standing Speakers
Thinking about a subwoofer for the Perlisten A3t?
Among the speakers in our database with a max MSRP price of 5000$ (Pair), these are the 5 Passive Floor-standing speakers that have the deeper bass levels than the Perlisten A3t's 31Hz:
Impedance and Sensitivity
Perlisten A3t's nominal impedance level is
4 ohms but can go down to as low as
3 ohms, and has a sensitivity of
87.7 dB.
Sensitivity
Floor-standing Speakers
Nominal Impedance of the 4 Ohms means that the Perlisten A3t is a difficult to drive speaker from nominal Impedance perspective, make sure that you choose an amplifier than can provide 4 Ohms for this speaker.
Many AVRs (audio/video receiver) in the market may have difficulty when the speakers dip below the 4 Ohms levels (this may cause clipping or even physical damage), so we recommend to not pair the Perlisten A3t with an AVR but use an Integrated Amplifier instead.
Sensitivity
88dB of the Perlisten A3t is an average sensitivity for stereo speaker so it is neither easy nor difficult to drive Sensitivity wise. Work out how loud the Perlisten A3t plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
Minimum Impedance of the Perlisten A3t
Even though the nominal impedance of the A3t is 4 ohms, the minimum impedance level of this speaker according to Perlisten is 3 ohms Perlisten A3t so while choosing an amplifier, you should ideally check if the unit you are considering can provide this impedance level.
What amplifier does the Perlisten A3t need?
At normal listening levels in a medium room, about
24–300 W
per channel into 4 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $5,000, or every amplifier we cover.
Input Type
A3t features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
Work out what gauge speaker cable this run needs →
Perlisten A3t External Dimensions and Weight
Perlisten A3t has external dimensions of (Height x Width x Depth) 50.59 x 11.02 x 15.35inch (1285.0 x 279.9 x 389.9mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Perlisten A3t is approximately 1091.3cm2 / 169.2inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers under $5000
Cabinet type and Materials
Perlisten A3t has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Does the Perlisten A3t come with a Grille?
A3t comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Perlisten A3t.
Official Product Page
Official manufacturer's product page for the Perlisten A3t speaker can be found below:
Official Product Page for Perlisten A3t