In this review, we will be comparing A3t and Silver 500 7G, two Passive Floor-standing speakers from Perlisten and Monitor Audio.
Let's have a brief look at the main features
of Perlisten A3t and Monitor Audio Silver 500 7G first before getting into our more
detailed comparison.
| Key Specs | Perlisten A3t | Monitor Audio Silver 500 7G |
|---|
| Design | 3-way | 3-way |
|---|
| Tweeter | — | 1" gold dome C-CAM with Uniform Dispersion (UD) Waveguide II |
|---|
| Midrange | — | 3" |
|---|
| Woofer | — | 2 x 8" C-CAM RST II |
|---|
| Frequency response | 31-27k Hz | 27-35k Hz |
|---|
| Sensitivity | 87.7 dB | 90.5 dB |
|---|
| Impedance | 4 ohms | 8 ohms |
|---|
| Power range | 50 – 300W watts | 80-250 watts |
|---|
| Weight | — | 22.53kg / 49.6lbs |
|---|
| Dimensions (H x W x D) | 50.59" x 11.02" x 15.35"
1285.0 x 279.9 x 389.9mm | 42-11/16" x 12-11/16" x 15-7/16"
1085.0 x 323.0 x 393.0mm |
|---|
What size room are the Perlisten A3t and Monitor Audio Silver 500 7G speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Perlisten A3t |
Monitor Audio Silver 500 7G |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking
through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both A3t and Silver 500 7G are 3-way speakers.
| Driver |
Perlisten A3t |
Monitor Audio Silver 500 7G |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
-inch
|
1-inch
|
|
Midrange
|
- |
1 x 3-inch |
|
Woofer
|
x -inch
|
2 x 8-inch
|
A3t features a " Tweeter and x " Woofer. On the other hand, the Silver 500 7G features a 1" gold dome C-CAM with Uniform Dispersion (UD) Waveguide II Tweeter, a 3" Midrange and 2 x 8" C-CAM RST II Woofer.
Frequency Response
A3t has a frequency range of 31-27k Hz whereas Silver 500 7G has a frequency range of 27-35k Hz. With a minimum frequency of 27Hz, the Silver 500 7G can go slightly deeper then the A3t's min frequency of 31Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
A3t is a 4 ohms speaker compared to the Silver 500 7G which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the A3t can provide this impedance level.
These two speakers also have different sensitivity levels. A3t sensitivity is rated at 87.7 dB and the Silver 500 7G's is rated at 90.5 dB. This 3 dB difference makes the Monitor Audio Silver 500 7G a more sensitive speaker compared to Perlisten A3t, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
Silver 500 7G can handle a max power of 250 watts RMS, whereas A3t has a max power handling value of watts RMS, 250 watts less than the Silver 500 7G.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier — change it to the one you own, or any you are
considering, and watch both numbers move.
Monitor Audio Silver 500 7G
Input Type and Bi-Amping / Bi-Wiring
Silver 500 7G features Binding post posts which make bi-amping or bi-wiring possible. A3t has a Binding post which doesn't feature bi-amping/bi-wiring.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Perlisten A3t's and Monitor Audio Silver 500 7G's external dimensions. Perlisten A3t has external dimensions of 1285.0 x 279.9 x 389.9mm (50.59 x 11.02 x 15.35inch) whereas Monitor Audio Silver 500 7G has external dimensions of 1085.0 x 323.0 x 393.0mm (42-11/16 x 12-11/16 x 15-7/16inch).
Perlisten A3t is 43.1mm narrower and 3.1mm less deeper than Monitor Audio Silver 500 7G but it is also 200mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Perlisten A3t is approximately 1091.3cm2 / 169.2inch2 and base area of the Monitor Audio Silver 500 7G is approximately 1269.4cm2 / 196.8inch2. The A3t requires 14% less surface area than the Silver 500 7G which gives it a small advantage on placement in tight spaces.
What's in the Box of Monitor Audio Silver 500 7G?
Here are the items that come with the Silver 500 7G:
- Floorstanding loudspeaker
- Grille
- 4 Outrigger feet
- 4 Rubber feet (pre-installed on outrigger feet)
- 4 Spikes
- 4 Bolts
- 4 Machine screws
- 2 Foam port plugs
- 2 Hex-keys
- Owners Manual
- Important Safety Instructions