In this review, we will be comparing Rubikore 6 and SourcePoint V10, two Passive Floor-standing speakers from DALI and MoFi.
Let's have a brief look at the main features
of DALI Rubikore 6 and MoFi SourcePoint V10 first before getting into our more
detailed comparison.
| Key Specs | DALI Rubikore 6 | MoFi SourcePoint V10 |
|---|
| Brand | DALI Denmark · founded 1983 | MoFi United States · founded 2016 |
|---|
| Design | 2-way | 2-way |
|---|
| Tweeter | 1.14" Hybrid dome + planar | 1.25" Soft-Dome |
|---|
| Woofer | 2 x 6.5" Wood fibre | 2 x 10" Paper Pulp |
|---|
| Frequency response | 38-34k Hz | 27-30k Hz |
|---|
| Sensitivity | 88.5 dB | 91 dB |
|---|
| Impedance | 4 ohms | 6 ohms |
|---|
| Power range | 40-200 watts | up to 200 watts |
|---|
| Weight | — | 72.73kg / 160lbs |
|---|
| Dimensions (H x W x D) | 38.98" x 7.87" x 14.96" 990 x 200 x 380 mm | 48-13/16" x 15-9/16" x 19-15/16" 1240.0 x 396.0 x 507.0mm |
|---|
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
Both Rubikore 6 and SourcePoint V10 are 2-way speakers.
DALI Rubikore 6MoFi SourcePoint V10
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
DALI Rubikore 6 |
MoFi SourcePoint V10 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1.14-inch
|
1.25-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 6.5-inch
|
2 x 10-inch
|
Rubikore 6 features a 1.14" Hybrid dome + planar Tweeter and 2 x 6.5" Wood fibre Woofer with a Crossover frequency at 800 / 2600 / 14000Hz. On the other hand, the SourcePoint V10 features a 1.25" Soft-Dome Tweeter and 2 x 10" Paper Pulp Woofer.
Frequency Response
Rubikore 6 has a frequency range of 38-34k Hz whereas SourcePoint V10 has a frequency range of 27-30k Hz. With a minimum frequency of 27Hz, the SourcePoint V10 can go significantly deeper on the low side and provide stronger bass compared to the Rubikore 6's min frequency of 38Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Rubikore 6 is a 4 ohms speaker compared to the SourcePoint V10 which has a nominal impedance of 6 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Rubikore 6 can provide this impedance level.
These two speakers also have different sensitivity levels. Rubikore 6 sensitivity is rated at 88.5 dB and the SourcePoint V10's is rated at 91 dB. This 2 dB difference makes the MoFi SourcePoint V10 a more sensitive speaker compared to DALI Rubikore 6, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
Both handle the same maximum of 200 watts RMS, though Rubikore 6 is rated 40-200 watts and SourcePoint V10 up to 200 watts.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Both Rubikore 6 and SourcePoint V10 features dual binding post speaker terminals for bi-amping or bi-wiring.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare DALI Rubikore 6's and MoFi SourcePoint V10's external dimensions. DALI Rubikore 6 has external dimensions of 990 x 200 x 380 mm () whereas MoFi SourcePoint V10 has external dimensions of 1240.0 x 396.0 x 507.0mm (48-13/16inch x 15-9/16inch x 19-15/16inch).
MoFi SourcePoint V10 is clearly the larger of the two speakers. Its body is 196mm wider, 250mm taller and 127mm deeper than DALI Rubikore 6.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
MoFi SourcePoint V10 needs about 164% more floor or shelf area. MoFi SourcePoint V10 is 127mm deeper, so it stands that much further out from the wall. MoFi SourcePoint V10 is 250mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the DALI Rubikore 6 is approximately 760.0cm2 / 117.8inch2 and base area of the MoFi SourcePoint V10 is approximately 2007.7cm2 / 311.2inch2. The Rubikore 6 requires 62% less surface area than the SourcePoint V10 which gives it a small advantage on placement in tight spaces.
What's in the Box of MoFi SourcePoint V10?
Here are the items that come with the SourcePoint V10:
- Floorstanding loudspeaker
- Grille
- 4 Isolation feet
- 4 Spike feet
- 4 Threaded-rods
- 4 Locking-rings
- 2 Jumper-plates (pre-installed)
- User Manual