MoFi SourcePoint V10 is a -way Passive Floor-standing speaker by MoFi. It features a 1.25" Soft-Dome Tweeter, x 10" Midrange and 2 x 10" Paper Pulp Woofer. The speaker has a frequency range of 27-30k Hz and a sensitivity of 91 dB. MoFi SourcePoint V10 has an MSRP of 7994$ per pair but can often be found around 0$ per pair.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the MoFi SourcePoint V10 Speaker
MoFi SourcePoint V10 has a Frequency response range of 27-30k Hz at ±3dB and Power Range of up to 200 watts. With a minimum frequency of 27 Hz, MoFi SourcePoint V10 delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Visit our Powered Subwoofers section to find out more about the available subwoofer options.
Here we have a comparison of how MoFi SourcePoint V10's Low and High frequency values compare with the average, max and min Low and High frequency values in its class.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
Among the speakers in our database with a max MSRP price of 10000$ (Pair), these are the 3 Passive Floor-standing speakers that have the deeper bass levels than the MoFi SourcePoint V10's 27Hz:
Impedance and Sensitivity
MoFi SourcePoint V10's nominal impedance level is
6 ohms and has a sensitivity of
91 dB.
Sensitivity
Floor-standing Speakers
Nominal Impedance of the 6 Ohms makes the MoFi SourcePoint V10 a relatively difficult to drive speaker compared to more frequently found 8 ohms speakers from nominal Impedance perspective.
Sensitivity
91dB of the MoFi SourcePoint V10 is considered a high sensitivity compared to average stereo speaker which makes MoFi SourcePoint V10 an easy to drive from Sensitivity perspective. If you are planning to power your speaker with a Tube amp which are generally very low power, the MoFi SourcePoint V10 will be a good choice.
Check the amplifiers that are in a similar price range to the MoFi SourcePoint V10:
Input Type
MoFi SourcePoint V10 has Binding post type connectors and lets bi-amping/bi-wiring. Bi-wiring can enhance the overall transparency of your loudspeakers by using separate speaker wires for the low and high-frequency drivers from a single amplifier. Bi-amping, on the other hand, involves using separate amplifiers for the high and low-frequency drivers, potentially resulting in a greater dynamic range and reduced distortion.
MoFi SourcePoint V10 External Dimensions and Weight
MoFi SourcePoint V10 has external dimensions of (Height x Width x Depth) 48-13/16inch x 15-9/16inch x 19-15/16inch (1240.0 x 396.0 x 507.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of MoFi SourcePoint V10 is approximately 2007.7cm2 / 311.2inch2.
WeightThe MoFi SourcePoint V10 weighs 72.73kg / 160lbs per piece. Here is a comparison of how MoFi SourcePoint V10's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers under $10000
Available colors
MoFi SourcePoint V10 is available in Black.
What's in the Box of MoFi SourcePoint V10?
Here are the items that are included inside the box of MoFi SourcePoint V10:
Floorstanding loudspeaker Grille 4 Isolation feet 4 Spike feet 4 Threaded-rods 4 Locking-rings 2 Jumper-plates (pre-installed) User Manual
Recommended Accessories
Here is a list of accessories that we think you may need for the MoFi SourcePoint V10.
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.