In this review, we will be comparing two different type of speakers by MoFi. MoFi SourcePoint V10 is a Floor-standing speaker whereas the SourcePoint 10 is a Bookshelf speaker.
Let's have a brief look at the main features
of MoFi SourcePoint V10 and MoFi SourcePoint 10 first before getting into our more
detailed comparison.
MoFi SourcePoint V10 Key Specs
- 2-way Design
- 1.25" Soft-Dome Tweeter
- 2 x 10" Paper Pulp Woofer
- 27-30k Hz Frequency Response
- 91 dB Sensitivity
- Impedance: 6ohms
- Power Range:up to 200watts
- Weight:72.73kg
- Dimensions (H x W x D): 1240.0" x 15-9/16" x 19-15/16"( 1240.0 x 396.0 x 507.0mm )
MoFi SourcePoint 10 Key Specs
- 2-way Design
- 1.25" wide roll soft dome Tweeter
- 10" Paper-pulp Woofer
- 42-30k Hz Frequency Response
- 91dB Sensitivity
- Impedance: 8ohms
- Power Range:30-200watts
- Weight:21.00kg
- Dimensions (H x W x D): 572.0" x 14.5" x 16"( 572 x 368 x 406mm )
MoFi SourcePoint V10 and SourcePoint 10 are members of MoFi's SourcePoint series of speakers. Below you can find the loudspeakers from this series.
MoFi SourcePoint Series
History
In the following sections, we will get into more detail in order to better understand how the MoFi SourcePoint V10 and MoFi SourcePoint 10 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both MoFi SourcePoint V10 and SourcePoint 10 are 2-way speakers.
| Driver |
MoFi SourcePoint V10 |
MoFi SourcePoint 10 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1.25-inch
|
1.25-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 10-inch
|
1 x 10-inch
|
MoFi SourcePoint V10 features a 1.25" Soft-Dome Tweeter and 2 x 10" Paper Pulp Woofer . On the other hand, the SourcePoint 10 features a 1.25" wide roll soft dome Tweeter and 1 x 10" Paper-pulp Woofer with a Crossover frequency at 1600 Hz.
Frequency Response
MoFi SourcePoint V10 has a frequency range of 27-30k Hz whereas SourcePoint 10 has a frequency range of 42-30k Hz. With a minimum frequency of 27Hz, the MoFi SourcePoint V10 can go significantly deeper on the low side and provide stronger bass compared to the SourcePoint 10's min frequency of 42Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
MoFi SourcePoint V10 is a 6 ohms speaker compared to the SourcePoint 10 which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. MoFi SourcePoint V10 sensitivity is rated at 91 dB and the SourcePoint 10's is rated at 91dB.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
MoFi SourcePoint V10 can handle a max power of 200 watts RMS from the amp the whereas MoFi SourcePoint V10 has a max power handling value of watts RMS , 200 watts less than the SourcePoint 10.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
MoFi SourcePoint V10 features Binding post posts which make bi-amping or bi-wiring possible. SourcePoint 10 has a 5-Way post which doesn't feature bi-amping/bi-wiring.
MoFi SourcePoint 10's 5-Way post terminals
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare MoFi SourcePoint V10's and MoFi SourcePoint 10's external dimensions. MoFi SourcePoint V10 has external dimensions of 1240.0 x 396.0 x 507.0mm ( 48-13/16inch x 15-9/16inch x 19-15/16inch ) whereas MoFi SourcePoint 10 has external dimensions of 572 x 368 x 406mm ( 22.5 x 14.5 x 16 inch) .
MoFi SourcePoint V10 is clearly the larger of the two speakers. Its body is 28mm wider, 668mm taller and 85mm deeper than MoFi SourcePoint 10.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the MoFi SourcePoint V10 is approximately 2007.7cm2 / 311.2inch2 and base area of the MoFi SourcePoint 10 is approximately 1552.0cm2 / 240.6inch2. The MoFi SourcePoint V10 requires 29% more surface area than the SourcePoint 10 which gives it a small disadvantage on placement in tight spaces.
What's in the Box of MoFi SourcePoint V10?
Here are the items that are included inside the box of MoFi SourcePoint V10:
Floorstanding loudspeaker Grille 4 Isolation feet 4 Spike feet 4 Threaded-rods 4 Locking-rings 2 Jumper-plates (pre-installed) User Manual