In this review, we will be comparing SourcePoint 10 and SourcePoint 888, two Passive Bookshelf speakers by MoFi Let's have a brief look at the main features
of MoFi SourcePoint 10 and MoFi SourcePoint 888 first before getting into our more
detailed comparison.
SourcePoint 10 and SourcePoint 888 are members of MoFi's SourcePoint series of speakers. Below you can find the loudspeakers from this series.
MoFi SourcePoint Series History
What size room are the MoFi SourcePoint 10 and MoFi SourcePoint 888 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the MoFi SourcePoint 10 and MoFi SourcePoint 888 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that SourcePoint 10 is a 2-way design whereas the SourcePoint 888 is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
MoFi SourcePoint 10 |
MoFi SourcePoint 888 |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1.25-inch
|
1.25-inch
|
|
Midrange
|
- |
1 x 8-inch |
|
Woofer
|
1 x 10-inch
|
2 x 8-inch
|
SourcePoint 10 features a 1.25" wide roll soft dome Tweeter and 1 x 10" Paper-pulp Woofer with a Crossover frequency at 1600 Hz. On the other hand, the SourcePoint 888 features a 1.25" wide roll soft dome Tweeter , a 8" Midrange and 2 x 8" Paper-pulp Woofer with a Crossover frequency at 130Hz and 1.6kHz .
Frequency Response
SourcePoint 10 has a frequency range of 42-30k Hz whereas SourcePoint 888 has a frequency range of 32-30k Hz. With a minimum frequency of 32Hz, the SourcePoint 888 can go significantly deeper on the low side and provide stronger bass compared to the SourcePoint 10's min frequency of 42Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
SourcePoint 10 is a 8 ohms speaker compared to the SourcePoint 888 which has a nominal impedance of 6 ohms.
These two speakers also have different sensitivity levels. SourcePoint 10 sensitivity is rated at 91dB and the SourcePoint 888's is rated at 87dB. This 4 dB difference makes the MoFi SourcePoint 10 a more sensitive speaker compared to MoFi SourcePoint 888, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
SourcePoint 888 features 5-Way post posts which make bi-amping or bi-wiring possible. SourcePoint 10 has a 5-Way post which doesn't feature bi-amping/bi-wiring.
MoFi SourcePoint 10's 5-Way post terminals
Cabinet Type and Port Position
Both SourcePoint 10 and SourcePoint 888 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare MoFi SourcePoint 10's and MoFi SourcePoint 888's external dimensions. MoFi SourcePoint 10 has external dimensions of 572 x 368 x 406mm ( 22.5 x 14.5 x 16 inch) whereas MoFi SourcePoint 888 has external dimensions of 1070 x 320 x 410mm ( 42.1 x 12.6 x 16.1 inch) .
MoFi SourcePoint 888 is 48mm narrower and 12mm less deeper than MoFi SourcePoint 10 but it is also 498mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the MoFi SourcePoint 10 is approximately 1552.0cm2 / 240.6inch2 and base area of the MoFi SourcePoint 888 is approximately 1312.0cm2 / 203.4inch2. The SourcePoint 10 requires 18% more surface area than the SourcePoint 888 which gives it a small disadvantage on placement in tight spaces.