In this review, we will be comparing SourcePoint 10 and SourcePoint 8, two Passive Bookshelf speakers by MoFi Let's have a brief look at the main features
of MoFi SourcePoint 10 and MoFi SourcePoint 8 first before getting into our more
detailed comparison.
SourcePoint 10 and SourcePoint 8 are members of MoFi's SourcePoint series of speakers. Below you can find the loudspeakers from this series.
MoFi SourcePoint Series History
What size room are the MoFi SourcePoint 10 and MoFi SourcePoint 8 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the MoFi SourcePoint 10 and MoFi SourcePoint 8 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both SourcePoint 10 and SourcePoint 8 are 2-way speakers.
| Driver |
MoFi SourcePoint 10 |
MoFi SourcePoint 8 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1.25-inch
|
1.25-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 10-inch
|
1 x 8-inch
|
SourcePoint 10 features a 1.25" wide roll soft dome Tweeter and 1 x 10" Paper-pulp Woofer with a Crossover frequency at 1600 Hz. On the other hand, the SourcePoint 8 features a 1.25" wide roll soft dome Tweeter and 1 x 8" Paper-pulp Woofer with a Crossover frequency at 1600 Hz.
Frequency Response
SourcePoint 10 has a frequency range of 42-30k Hz whereas SourcePoint 8 has a frequency range of 47-30k Hz. With a minimum frequency of 42Hz, the SourcePoint 10 can go significantly deeper on the low side and provide stronger bass compared to the SourcePoint 8's min frequency of 47Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
SourcePoint 10 and SourcePoint 8 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. SourcePoint 10 sensitivity is rated at 91dB and the SourcePoint 8's is at 87dB. This 4 dB difference makes the MoFi SourcePoint 10 a more sensitive speaker compared to MoFi SourcePoint 8, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
SourcePoint 10 can handle a max power of 200 watts RMS from the amp the whereas SourcePoint 8 has a max power handling value of 150 watts RMS, 50 watts less than the SourcePoint 10.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
SourcePoint 10 features 5-Way post type posts and SourcePoint 8 has a 5-Way post type posts. None of these speakers feature bi-amping/bi-wiring.
MoFi SourcePoint 10's 5-Way post terminals
MoFi SourcePoint 8's 5-Way post terminals
Cabinet Type and Port Position
Both SourcePoint 10 and SourcePoint 8 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare MoFi SourcePoint 10's and MoFi SourcePoint 8's external dimensions. MoFi SourcePoint 10 has external dimensions of 572 x 368 x 406mm ( 22.5 x 14.5 x 16 inch) whereas MoFi SourcePoint 8 has external dimensions of 456 x 290 x 320mm ( 18 x 11.4 x 12.6 inch) .
MoFi SourcePoint 10 is clearly the larger of the two speakers. Its body is 78mm wider, 116mm taller and 102mm deeper than MoFi SourcePoint 8.
Below you can see the front view size comparison of MoFi SourcePoint 10 and MoFi SourcePoint 8 in scale.
Comparison image of MoFi SourcePoint 10 and MoFi SourcePoint 8 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the MoFi SourcePoint 10 is approximately 1552.0cm2 / 240.6inch2 and base area of the MoFi SourcePoint 8 is approximately 928.0cm2 / 143.8inch2. The SourcePoint 10 requires 67% more surface area than the SourcePoint 8 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The MoFi SourcePoint 10 weighs 21.00kg / 46.2lbs and the MoFi SourcePoint 8 weighs 12.70kg / 27.9lbs. This makes the SourcePoint 10 65% heavier than the SourcePoint 8.
Here is a comparison of how SourcePoint 10 and SourcePoint 8's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
 Max Input Power |
200 watts
vs
150 watts
|
Handle more power from your amplifier |
 Sensitivity |
91 dB
vs
87 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
10 inches
vs
8 inches
|
Larger woofer |
| Low Frequency Response |
42 Hz
vs
47 Hz
|
Generates deeper bass |
 Minimum Impedance |
6.4 ohms
vs
6.2 ohms
|
Very low impedance levels puts more pressure on amplifier |
 Height |
456mm
vs
572mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
928cm2 (290x320mm)
vs
1552cm2 (368x422mm)
|
Takes less floor space |
 Price per pair* |
2999USD
vs
3699USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
MoFi SourcePoint 10 |
MoFi SourcePoint 8 |
| Brand |
MoFi |
MoFi |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
30-200 watts |
30-150 watts |
| Sensitivity |
91dB |
87dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
6.2 ohms |
6.4 ohms |
| Frequency Response |
42-30k Hz |
47-30k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
8" |
| Woofer Composition |
Paper-pulp |
Paper-pulp |
| Tweeter Size |
1.25" |
1.25" |
| Tweeter Type |
wide roll soft dome |
wide roll soft dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
1600 Hz |
1600 Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
572.0mm (22.5") |
456.0mm (18") |
| Width |
368.0mm (14.5") |
290.0mm (11.4") |
| Depth |
422.0mm (16.6") |
320.0mm (12.6") |
| Weight |
21.00kg (46.2lbs) |
12.70kg (27.9lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
real wood veneer |
real wood veneer |
| Available Colors |
Satin Walnut, Satin Black Ash |
Black, Walnut, Satin White |
| Mounting Bracket |
No |
No |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
|
|
| Labor Warranty |
|
|