In this review, we will be comparing two different type of speakers by MoFi. MoFi SourcePoint 888 is a Bookshelf speaker whereas the MoFi SourcePoint V10 is a Floor-standing speaker.
Let's have a brief look at the main features
of MoFi SourcePoint 888 and MoFi SourcePoint V10 first before getting into our more
detailed comparison.
MoFi SourcePoint 888 Key Specs
- 3-way Design
- 1.25" wide roll soft dome Tweeter
- 8" Midrange
- 2 x 8" Paper-pulp Woofer
- 32-30k Hz Frequency Response
- 87dB Sensitivity
- Impedance: 6ohms
- Power Range:Up to 200watts
- Weight:43.00kg
- Dimensions (H x W x D): 1070.0" x 12.6" x 16.1"( 1070 x 320 x 410mm )
MoFi SourcePoint V10 Key Specs
- 2-way Design
- 1.25" Soft-Dome Tweeter
- 2 x 10" Paper Pulp Woofer
- 27-30k Hz Frequency Response
- 91 dB Sensitivity
- Impedance: 6ohms
- Power Range:up to 200watts
- Weight:72.73kg
- Dimensions (H x W x D): 1240.0" x 15-9/16" x 19-15/16"( 1240.0 x 396.0 x 507.0mm )
SourcePoint 888 and MoFi SourcePoint V10 are members of MoFi's SourcePoint series of speakers. Below you can find the loudspeakers from this series.
MoFi SourcePoint Series
History
In the following sections, we will get into more detail in order to better understand how the MoFi SourcePoint 888 and MoFi SourcePoint V10 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that SourcePoint 888 is a 3-way design whereas the MoFi SourcePoint V10 is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
MoFi SourcePoint 888 |
MoFi SourcePoint V10 |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
1.25-inch
|
1.25-inch
|
|
Midrange
|
1 x 8-inch |
- |
|
Woofer
|
2 x 8-inch
|
2 x 10-inch
|
SourcePoint 888 features a 1.25" wide roll soft dome Tweeter , a 8" Midrange and 2 x 8" Paper-pulp Woofer with a Crossover frequency at 130Hz and 1.6kHz . On the other hand, the MoFi SourcePoint V10 features a 1.25" Soft-Dome Tweeter and 2 x 10" Paper Pulp Woofer .
Frequency Response
SourcePoint 888 has a frequency range of 32-30k Hz whereas MoFi SourcePoint V10 has a frequency range of 27-30k Hz. With a minimum frequency of 27Hz, the MoFi SourcePoint V10 can go significantly deeper on the low side and provide stronger bass compared to the SourcePoint 888's min frequency of 32Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
SourcePoint 888 and MoFi SourcePoint V10 have the same Impedance of 6 ohms but where they differ is the sensitivity levels. SourcePoint 888 sensitivity is rated at 87dB and the MoFi SourcePoint V10's is at 91 dB. This 4 dB difference makes the MoFi SourcePoint V10 a more sensitive speaker compared to MoFi SourcePoint 888, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
SourcePoint 888 can handle a max power of 200 watts RMS from the amp the whereas MoFi SourcePoint V10 has a max power handling value of watts RMS, 200 watts less than the SourcePoint 888.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both SourcePoint 888 and MoFi SourcePoint V10 features dual binding post speaker terminals for bi-amping or bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare MoFi SourcePoint 888's and MoFi SourcePoint V10's external dimensions. MoFi SourcePoint 888 has external dimensions of 1070 x 320 x 410mm ( 42.1 x 12.6 x 16.1 inch) whereas MoFi SourcePoint V10 has external dimensions of 1240.0 x 396.0 x 507.0mm ( 48-13/16inch x 15-9/16inch x 19-15/16inch ) .
MoFi SourcePoint V10 is clearly the larger of the two speakers. Its body is 76mm wider, 170mm taller and 97mm deeper than MoFi SourcePoint 888.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the MoFi SourcePoint 888 is approximately 1312.0cm2 / 203.4inch2 and base area of the MoFi SourcePoint V10 is approximately 2007.7cm2 / 311.2inch2. The SourcePoint 888 requires 35% less surface area than the MoFi SourcePoint V10 which gives it a small advantage on placement in tight spaces.
What's in the Box of MoFi SourcePoint V10?
Here are the items that come with the MoFi SourcePoint V10:
Floorstanding loudspeaker Grille 4 Isolation feet 4 Spike feet 4 Threaded-rods 4 Locking-rings 2 Jumper-plates (pre-installed) User Manual