SpeakerDecision
  • SPEAKERS by TYPE
    • Passive Bookshelf Speakers
    • Passive Floor-standing Speakers
    • Passive Center Channel Speakers
    • Passive In-wall Speakers
    • All Passive Speakers
    • Powered Subwoofers
    • Powered Stereo Speakers
  • AMPLIFIERS
  • SMART FIND
  1. Home
  2. Revel Speakers
  3. Passive Floor-standing Speakers
Revel PerformaBe F226Be Review
Revel PerformaBe F226Be

Main Features

  • 1" dome with proprietary acoustic lens waveguide Tweeter
  • 5.25" Deep Ceramic Composite Midrange
  • 2 x 6.5" DCC Aluminum Woofer
  • 50-40k Hz Frequency Response
  • 90 dB Sensitivity
  • Impedance: 8ohms
  • Power Range: 50-200watts
  • Weight:58.00 lbs / 26.36 kg
  • Dimensions(HxWxD): 41-5/16"x9-13/16"x13-3/4" / 1050.0 x 250.0 x 350.0mm
CHECK PRICE

Compare To

x
Add a Speaker for comparison
Revel PerformaBe F226Be Review
Revel PerformaBe F226Be Revel PerformaBe F22...
See at AMAZON

Revel PerformaBe F226Be is a 3-way Passive Bass Reflex Floor-standing speaker by Revel. It features a 1" dome with proprietary acoustic lens waveguide Tweeter, 1 x 5.25" Midrange and 2 x 6.5" DCC Aluminum Woofer. The speaker has a frequency range of 50-40k Hz and a sensitivity of 90 dB. Revel PerformaBe F226Be has an MSRP of 7700$ per pair.

Room Size Suitability

The size of the room where you plan to use the Revel PerformaBe F226Be is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:

Listening Environment* Suitability
Near-fieldBad
Small RoomPoor
Mid-size RoomGood
Large RoomGood
Very Large RoomPoor

(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2. Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)

Revel's PerformaBe Series of Loudspeakers

PerformaBe F226Be is a member of Revel's PerformaBe series of Passive speakers. Below you can see the main specs of these speakers.

Revel PerformaBe Series Speakers
Model Frequency SensitivityImpedance Woofer
Revel PerformaBe F228Be
Compare
27-44k Hz 90 dB8Ω 2 x 8"
Revel M126Be
Compare
54-44k Hz 86 dB8Ω 1 x 6.5"
Revel PerformaBe F226Be
50-40k Hz 90 dB8Ω 2 x 6.5"
Revel PerformaBe F328Be
Compare
26-40k Hz 91 dB8Ω 3 x 8.0"


**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.

Frequency Response of the Revel PerformaBe F226Be Speaker

Revel PerformaBe F226Be has a Frequency response range of 50-40k Hz at ±3dB and Power Range of 50-200 watts. With a minimum frequency of 50 Hz, PerformaBe F226Be delivers moderate bass depth so depending on your use case, you might want to consider adding a subwoofer to your system.

Visit our Powered Subwoofers section to find out more about the available subwoofer options.
Here we have a comparison of how PerformaBe F226Be's Low and High frequency values compare with the average, max and min Low and High frequency values in its class.
Low Frequency
Floor-standing Speakers
Revel PerformaBe F226Be
Min
Average
Max
High Frequency
Floor-standing Speakers
Revel PerformaBe F226Be
Min
Average
Max

Among the speakers in our database with a max MSRP price of 10000$ (Pair), these are the 5 Passive Floor-standing speakers that have the deeper bass levels than the Revel PerformaBe F226Be's 50Hz:

  • PSB Synchrony T600 with Low Frequency of 24 Hz (Compare w/ PerformaBe F226Be)
  • KLH Kendall with Low Frequency of 25 Hz (Compare w/ PerformaBe F226Be)
  • GoldenEar Triton Five with Low Frequency of 26 Hz (Compare w/ PerformaBe F226Be)
  • Monitor Audio Silver 500 7G with Low Frequency of 27 Hz (Compare w/ PerformaBe F226Be)
  • MartinLogan Motion XT F200 with Low Frequency of 27 Hz (Compare w/ PerformaBe F226Be)

Impedance and Sensitivity

Revel PerformaBe F226Be's nominal impedance level is 8 ohms and has a sensitivity of 90 dB.

Sensitivity
Floor-standing Speakers
Revel PerformaBe F226Be
Min
Average
Max

8 Ohms is pretty much the standard nominal impedance amongst stereo speakers and amplifiers so Revel PerformaBe F226Be is not considered a difficult to drive speaker from nominal Impedance perspective.

Sensitivity

90dB of the Revel PerformaBe F226Be is an average sensitivity for stereo speaker so it is neither easy nor difficult to drive Sensitivity wise.

Check the amplifiers that are in a similar price range to the Revel PerformaBe F226Be:

  • Integrated Amps under 5000 USD
  • Integrated Amps under 10000 USD
  • Integrated Amps under 20000 USD
  • All Integrated Amplifiers

Input Type

PerformaBe F226Be has Binding post type connectors and lets bi-amping/bi-wiring. Bi-wiring can enhance the overall transparency of your loudspeakers by using separate speaker wires for the low and high-frequency drivers from a single amplifier. Bi-amping, on the other hand, involves using separate amplifiers for the high and low-frequency drivers, potentially resulting in a greater dynamic range and reduced distortion.

Revel PerformaBe F226Be External Dimensions and Weight

Revel PerformaBe F226Be has external dimensions of (Height x Width x Depth) 41-5/16 x 9-13/16 x 13-3/4inch (1050.0 x 250.0 x 350.0mm ).

Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited. The base area of Revel PerformaBe F226Be is approximately 875.0cm2 / 135.6inch2.

To get a better perspective on the real life size of Revel PerformaBe F226Be, let's compare it with a standard size Compact Disc which has a diameter of 4.7inch (120mm).

Revel PerformaBe F226Be Real Life Body Size Comparison
Revel PerformaBe F226Be Speaker Size Compared to a Compact Disc

Here we place the Revel PerformaBe F226Be virtually next to a standard width amplifier and turntable on a media center to get a better idea about the size.

Revel PerformaBe F226Be placed next to a Media Stand
Revel PerformaBe F226Be Floor-standing Speaker next to a Media Stand

Weight

The Revel PerformaBe F226Be weighs 26.36kg / 58lbs per piece. Here is a comparison of how PerformaBe F226Be's weight compares with the average, max and min weights in its class.

Weight
All Floor-standing Speakers
Revel PerformaBe F226Be
Min
Average
Max
Weight
Floor-standing Speakers under $10000
Revel PerformaBe F226Be
Min
Average
Max

How does the Revel PerformaBe F226Be compare to the Revel PerformaBe F228Be?

One of the natural alternative to the Revel PerformaBe F226Be is the PerformaBe F228Be which is located one step higher in Revel's Passive Floor-standing selection.

Check the Detailed Comparison of Revel PerformaBe F226Be vs PerformaBe F228Be for more details.

Cabinet type and Materials

Revel PerformaBe F226Be has a Bass Reflex type cabinet and a Wood/Lacquer finish. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.

Speaker Feet

Revel PerformaBe F226Be comes with 4 Spike feet which you can use to secure your loudspeaker on the surface that you are putting on.

It is always recommended to use some kind of feet under all types of speakers. Besides limiting the movement of the speakers, it also compensates for non-flat surfaces and limits the contact surface area of the speaker. Rubber based feet also help isolating the vibrations within certain frequency ranges.

Port Position

Revel PerformaBe F226Be is a front-firing port speaker , which gives you more flexibility compared to rear firing speakers when you need to place it close against a wall or other surfaces.

Available colors

Revel PerformaBe F226Be is available in Gloss Black.

Does the Revel PerformaBe F226Be come with a Grille?

PerformaBe F226Be comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.

What's in the Box of Revel PerformaBe F226Be?

Here are the items that are included inside the box of PerformaBe F226Be:
  • Floorstanding loudspeaker
  • Grille
  • 4 Spike feet
  • 4 Locking rings
  • 4 Washers
  • 2 Terminal jumpers (pre-installed)
  • Foam port plug
  • Owners Manual
  • Recommended Accessories

    Here is a list of accessories that we think you may need for the Revel PerformaBe F226Be.

    • Speaker Cable and Connectors
      • Speaker Cables with Banana Plugs: If you know the lenght of the cable you need, this is the easier option to connect your speakers with your amp.
      • Speaker Cables without Connectors: If you are not sure about the lenght or need longer than standard cables with plugs, choose this option.
      • Banana Connectors and Plugs: If you chose the cables without connectors option or already have some cable around, pick the banana plugs separately.
    • Vibration Isolators: IsoAcoustics isolators more affordable options too.
    • Acoustic Panels and Treatments: Your room is as important as your stereo equipment so acoustic treatments goes a long way in improving the overall performance.

    Warranty

    5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.

    Revel PerformaBe F226Be Alternatives in Passive Floor-standing Speakers
    Model Type Sensitivity Impedance Frequency
    Revel PerformaBe F228Be
    Compare
    3-way 90 dB 8 ohms 27-44k Hz
    B&W 702 S3
    Compare
    3-way 90 dB 8 ohms 46-28k Hz
    Revel M126Be
    Compare
    2-way 86 dB 8 ohms 54-44k Hz
    KEF R7
    Compare
    3-way 88 dB 8 ohms 48-28k Hz
    Revel PerformaBe F328Be
    Compare
    3-way 91 dB 8 ohms 26-40k Hz
    GoldenEar Triton One.R
    Compare
    3-way 92 dB 8 ohms 13-35k Hz
    B&W 703 S3
    Compare
    3-way 90 dB 8 ohms 46-28k Hz
    Polk R700
    Compare
    3-way 88 dB 8 ohms 38-38k Hz
    Frequently Asked Questions about Revel PerformaBe F226Be
    What is the External Dimensions of Revel PerformaBe F226Be
    What is the Speaker Sensitivity of Revel PerformaBe F226Be
    is the Revel PerformaBe F226Be an easy to drive speaker?

    Revel PerformaBe F226Be Detailed Specifications

    General
    BrandRevel
    Full Model NameRevel PerformaBe F226Be
    Speaker Type3-way Floor-standing
    Power Range50-200 watts
    Sensitivity90 dB
    Impedance8 ohms
    Frequency Response50-40k Hz
    DRIVERS
    Woofer Size6.5-inch
    Woofer CompositionDCC Aluminum
    Woofer SurroundRubber
    Tweeter Size1-inch
    Tweeter Typedome with proprietary acoustic lens waveguide
    Midrange Size5.25-inch
    Port Positionfront

    CONNECTIONS
    Connector TypeBinding post
    Biamp InputsYes
    Port Positionfront
    PHYSICAL SPECS
    Height1050.0mm ( 41-5/16-inch)
    Width250.0mm ( 9-13/16-inch)
    Depth350.0mm ( 13-3/4-inch)
    Height1050.0mm ( 41-5/16-inch)
    Weight26.36kg ( 58.00 lbs)
    EnclosureBass Reflex
    FinishWood/Lacquer
    Available ColorsGloss Black
    Mounting BracketNo
    GrilleYes
    Moisture ResistanceNo
    OTHER
    Handheld RemoteNo
    Parts Warranty5 Years
    Labor Warranty5 Years
    LATEST BLOG POSTS

    Klipsch La Scala AL6 and Klipschorn AK7 Speakers are Unveiled
    New Audiolab 6000A MkII with upgraded DAC and new HDMI ARC connection
    Q Acoustics 3000c Series Loudspeakers added to the database
    WiiM VibeLink Amp: A Game-Changer for Budget Hi-Fi in 2025
    KEF Meta and Reference Meta Floorstanding Speaker Size and Specs Comparison
    Triangle Borea Bookshelf and Floorstanding Speaker Size and Specs Comparison


    Latest Passive Floor-standing Speakers
    Klipsch Heritage La Scala AL6
    Klipsch La Scala AL6
    3-way Floor-standing | 103 dB | 8 ohms
    Klipsch Heritage Klipschorn AK7
    Klipsch Klipschorn AK7
    3-way Floor-standing | 103 dB | 8 ohms
    Q Acoustics 3050c
    Q Acoustics 3050c
    2-way Floor-standing | 90 dB | 6 ohms
    Q Acoustics 3050i
    Q Acoustics 3050i
    2-way Floor-standing | 91 dB | 6 ohms
    Triangle Borea BR10
    Triangle Borea BR10
    3-way Floor-standing | 92 dB | 8 ohms
    ELAC Debut 3.0 DF63
    ELAC Debut 3.0 DF63
    3-way Floor-standing | 87.5 dB | 4 ohms
    ELAC Debut 3.0 DF53
    ELAC Debut 3.0 DF53
    3-way Floor-standing | 87.5 dB | 4 ohms
    Monitor Audio Gold 500 6G
    Monitor Audio Gold 500 6G
    3-way Floor-standing | 88.5 dB | 4 ohms
    Monitor Audio Gold 300 6G
    Monitor Audio Gold 300 6G
    3-way Floor-standing | 87 dB | 4 ohms
    JBL Stage 280F
    JBL Stage 280F
    3-way Floor-standing | 91 dB | 6 ohms


    Copyright © 2025 by SpeakerDecision
    About Privacy Contact US Camera Decision
    Compare List

      Add a speaker to the List