In this review, we will be comparing MoFi SourcePoint V10 and Triton Five, two Passive Floor-standing speakers from MoFi and GoldenEar.
Let's have a brief look at the main features
of MoFi SourcePoint V10 and GoldenEar Triton Five first before getting into our more
detailed comparison.
MoFi SourcePoint V10 Key Specs
- 1.25" Soft-Dome Tweeter
- 2 x 10" Paper Pulp Woofer
- 27-30k Hz Frequency Response
- 91 dB Sensitivity
- Impedance: 6ohms
- Power Range:up to 200watts
- Weight:72.73kg
- Dimensions (H x W x D): 1240.0" x 15-9/16" x 19-15/16"( 1240.0 x 396.0 x 507.0mm )
GoldenEar Triton Five Key Specs
- 2-way Design
- " Folded Ribbon Tweeter
- 2 x 6" Polypropylene Woofer
- 26-35k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 8ohms
- Power Range:15-400watts
- Weight:18.18kg
- Dimensions (H x W x D): 1131.0" x 11-1/16" x 16-9/16"( 1131.0 x 281.0 x 421.0mm )
In the following sections, we will get into more detail in order to better understand how the MoFi SourcePoint V10 and GoldenEar Triton Five compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that MoFi SourcePoint V10 is a -way design whereas the Triton Five is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
MoFi SourcePoint V10 |
GoldenEar Triton Five |
|
Driver Setup
|
-way
|
2-way
|
|
Tweeter
|
1.25-inch
|
-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 10-inch
|
2 x 6-inch
|
MoFi SourcePoint V10 features a 1.25" Soft-Dome Tweeter and 2 x 10" Paper Pulp Woofer . On the other hand, the Triton Five features a " Folded Ribbon Tweeter and 2 x 6" Polypropylene Woofer .
Frequency Response
MoFi SourcePoint V10 has a frequency range of 27-30k Hz whereas Triton Five has a frequency range of 26-35k Hz. With a minimum frequency of 26Hz, the Triton Five can go slightly deeper then the MoFi SourcePoint V10's min frequency of 27Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
MoFi SourcePoint V10 is a 6 ohms speaker compared to the Triton Five which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. MoFi SourcePoint V10 sensitivity is rated at 91 dB and the Triton Five's is rated at 90 dB. This 1 dB difference makes the MoFi SourcePoint V10 a more sensitive speaker compared to GoldenEar Triton Five, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
MoFi SourcePoint V10 can handle a max power of 400 watts RMS from the amp the whereas MoFi SourcePoint V10 has a max power handling value of watts RMS , 400 watts less than the Triton Five.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
MoFi SourcePoint V10 features Binding post posts which make bi-amping or bi-wiring possible. Triton Five has a 5-way Post which doesn't feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare MoFi SourcePoint V10's and GoldenEar Triton Five's external dimensions. MoFi SourcePoint V10 has external dimensions of 1240.0 x 396.0 x 507.0mm ( 48-13/16inch x 15-9/16inch x 19-15/16inch ) whereas GoldenEar Triton Five has external dimensions of 1131.0 x 281.0 x 421.0mm ( 44-1/2 x 11-1/16 x 16-9/16inch) .
MoFi SourcePoint V10 is clearly the larger of the two speakers. Its body is 115mm wider, 109mm taller and 86mm deeper than GoldenEar Triton Five.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the MoFi SourcePoint V10 is approximately 2007.7cm2 / 311.2inch2 and base area of the GoldenEar Triton Five is approximately 1183.0cm2 / 183.4inch2. The MoFi SourcePoint V10 requires 70% more surface area than the Triton Five which gives it a small disadvantage on placement in tight spaces.