The M10 V3 is an Streaming Integrated Amplifier by NAD that delivers 100 watts x 2 channels into 8 ohms and 100 watts x 2 channels into 4 ohms. Minimum impedance of 4 ohms makes the M10 V3 compatible with a wide range of loudspeakers. Thanks to its built-in ESS Sabre ES9039 DAC, you can play digital sources directly without the need for an external DAC unit. NAD M10 V3 lets you connect your turntable via its Phono input and start listening to your vinyl collection without a hassle. NAD M10 V3 has an MSRP of 2499$.
NAD replaced the older NAD Masters Series M10 V2 with this model. Follow the link to read our detailed comparison of these models:
Compare NAD M10 V3 vs NAD Masters Series M10 V2
There are 10 NAD amplifiers in our database. Below you can see the main specs of these amps.
NAD Integrated Amplifier Series
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Performance Specs
One of the most important factors when deciding on an integrated amplifier is its power ratings and compatibility with your speaker's impedance requirements.The NAD M10 V3 is rated at 100 watts RMS into 8-ohms. NAD provides this wattage at a THD (Total Harmonic Distortion) of 0.03% which is an important indicator of distortion at the given values (lower THD is better).
Here are the main highlights of its performance specs:
- 100 watts into 8-ohms (20-20k) at 0.03%
- 100 watts into 4-ohms
- 4-ohms Min Impedance (allows compatibility with a wide range of loudspeakers)
- 90dB Signal to Noise Ratio
When pairing the NAD M10 V3 with a passive Bookshelf (Stand mount) or Passive Floor Standing (Tower) speaker, you have to check if their Max Power Range is below the max wattage of the amp for the given impedance levels.
Operating your amp outside of this max range may damage the speakers.
Inputs and Outputs
Besides the performance specs of the NAD M10 V3, the next important feature set that you have to evaluate is the input and output selections that it offers.
Inputs
- Phono Input
- 1 Optical Digital Input
- 1 Coaxial Digital Input
- USB Input:
Outputs
- Yes Preamp Outputs
- Subwoofer Output
Bluetooth Connectivity
NAD M10 V3 features built-in Bluetooth for wireless music streaming from your Bluetooth-enabled devices such as Apple iPod/iPhone/iPad, Android smartphone/tablet, Windows PC, Mac computers/laptops.
Among the amps in the same price range, these are the 5 amps that have Bluetooth Connectivity:
Phono Input
Subwoofer Output
NAD M10 V3 has a dedicated subwoofer output which can be used to connect it directly to a powered subwoofer via an LFE(Low Frequency Effects) cable.
Check our
Powered Subwoofers page to find a subwoofer that will work with NAD M10 V3 amp and your speakers.
DAC and Digital Music
The NAD M10 V3's built-in DAC allows the connection of digital sources directly, eliminating the need for an external DAC. The DAC chip that is used in the M10 V3 is the
ESS Sabre ES9039, and supports resolutions up to
24-bit, 192KHZ.
NAD M10 V3 External Dimensions and Weight
NAD M10 V3 has external dimensions of (H x W x D) 3-15/16inch x 8-9/16inch x 10-15/16inch (101.0mm x 218.0mm x 278.0mm ). The unit weighs
5.00kg / 11lbs.
Base Surface Area
Base surface area of an integrated amplifier may become an important decision factor when the space in your room or desk is limited.
The base area of the NAD M10 V3 is approximately 606.0cm2 / 93.9inch2.
- Width: 218.0mm (8-9/16")
- Height: 101.0mm (3-15/16")
- Depth: 278.0mm (10-15/16")
- Weight: 5.00 kg (11.00lbs)
- Base Surface Area: ~606.0cm2 / 93.9inch2
- Volume: ~6.1 liter / 1.6 gallon
What's in the Box of NAD M10 V3?
Here are the items that are included inside the box of M10 V3:
Integrated amplifier6.5-feet AC power cordRemote control (BC1)2 -inchAAA-inch batteriesAuto calibration microphoneUSB microphone adapterCleaning clothQuick Setup GuideDirac Live Quick Start GuideImportant Safety InstructionsWarranty Information
Warranty
2 Years of parts warranty and 2 Years of labor warranty is generally provided for the NAD M10 V3 by the manufacturer.
| General |
| Brand |
NAD |
| Full Model Name |
NAD Masters Series M10 V3 |
| Amplifier Type |
Integrated Amplifier |
| Performance |
| Watts RMS per Channel into 8-ohms |
100 watts |
| Watts RMS per Channel into 6-ohms |
N/A |
| Watts RMS per Channel into 4-ohms |
100 watts |
| Frequency Bandwidth |
20-20k |
| THD |
0.03% |
| Minimum Impedance |
4 |
| Signal to Noise Ratio |
90 dB |
| Digital Music |
| Built-in DAC |
Yes |
| DAC Specs |
ESS Sabre ES9039 |
| Bluetooth |
Yes |
| WiFi |
802.11ac |
| Ecosystem |
| Apple AirPlay |
Yes |
| Apple AirPlay2 |
Yes |
| DTS Play-Fi |
No |
| Chromecast built-in |
|
| Roon |
Ready |
| HEOS |
No |
| BluOS |
Yes |
| CONNECTIONS |
| Total Analog Inputs |
|
| Phono Input |
Yes |
| Optical Digital Inputs |
1 |
| Coaxial Digital Inputs |
1 |
| USB Input |
Yes |
| Preamp Outputs |
Yes |
| Pre-out / Main-in Loop |
No |
| Headphone Output |
No |
| Subwoofer Output |
Yes |
| Removable Power Cord |
IEC 3-prong |
| PHYSICAL SPECS |
| Height |
101.0mm (3-15/16") |
| Width |
218.0mm (8-9/16") |
| Depth |
278.0mm (10-15/16") |
| Weight |
5.00 kg (11.00lbs) |
| OTHER |
| Parts Warranty |
2 Years |
| Labor Warranty |
2 Years |