ELAC Concentro M 807 is a 4-way Passive Bass reflex Floor-standing speaker by ELAC. It was released in 2025. It features a JET 6c AMT Tweeter, 2 x 4.5" Midrange and 2 x 10" Aluminium sandwich (AS) Woofer.
VXe array: six 40 mm A-XR drivers ring the JET 6c tweeter, with a rear-panel switch setting the directivity.
The speaker has a frequency range of 24-50k Hz and a sensitivity of 88 dB. ELAC Concentro M807 has an MSRP of 45000$ per pair.
Room Size Suitability
The size of the room where you plan to use the ELAC Concentro M807 is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Are you nuts? |
| Small Room | Poor |
| Mid-size Room | Average |
| Large Room | Good |
| Very Large Room | Good |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
ELAC's Concentro 2.0 Series of Loudspeakers
M807 is a member of ELAC's Concentro 2.0 series of Passive speakers. Below you can see the main specs of these speakers.
See all 5 ELAC Concentro 2.0 models compared »
ELAC Concentro 2.0 Series Speakers
Frequency Response of the ELAC Concentro M807 Speaker
ELAC Concentro M807 has a Frequency response range of 24-50k Hz and Power Range of 80-600 watts. With a minimum frequency of 24 Hz, M807 delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how M807's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Floor-standing Speakers
Thinking about a subwoofer for the ELAC Concentro M807?
Crossover frequency of the ELAC Concentro M807?
The crossover points of the M807 are set at 150/650/2650Hz.
Impedance and Sensitivity
ELAC Concentro M807's nominal impedance level is
4 ohms but can go down to as low as
3.1 ohms, and has a sensitivity of
88 dB.
Sensitivity
Floor-standing Speakers
Nominal Impedance of the 4 Ohms means that the ELAC Concentro M 807 is a difficult to drive speaker from nominal Impedance perspective, make sure that you choose an amplifier than can provide 4 Ohms for this speaker.
Many AVRs (audio/video receiver) in the market may have difficulty when the speakers dip below the 4 Ohms levels (this may cause clipping or even physical damage), so we recommend to not pair the ELAC Concentro M 807 with an AVR but use an Integrated Amplifier instead.
Sensitivity
88dB of the ELAC Concentro M 807 is an average sensitivity for stereo speaker so it is neither easy nor difficult to drive Sensitivity wise. Work out how loud the ELAC Concentro M807 plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
Minimum Impedance of the ELAC Concentro M807
Even though the nominal impedance of the M807 is 4 ohms, the minimum impedance level of this speaker according to ELAC is 3.1 ohms ELAC Concentro M 807 so while choosing an amplifier, you should ideally check if the unit you are considering can provide this impedance level.
What amplifier does the ELAC Concentro M807 need?
At normal listening levels in a medium room, about
24–375 W
per channel into 4 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? See every integrated amplifier we cover.
Input Type
M807 has Binding posts type connectors and lets bi-amping/bi-wiring. Bi-wiring can enhance the overall transparency of your loudspeakers by using separate speaker wires for the low and high-frequency drivers from a single amplifier. Bi-amping, on the other hand, involves using separate amplifiers for the high and low-frequency drivers, potentially resulting in a greater dynamic range and reduced distortion.
Work out what gauge speaker cable this run needs →
ELAC Concentro M807 External Dimensions and Weight
ELAC Concentro M807 has external dimensions of (Height x Width x Depth) 52-3/4 x 18-1/8 x 23-7/16inch (1340.0 x 461.0 x 595.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of ELAC Concentro M807 is approximately 2743.0cm2 / 425.2inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe ELAC Concentro M807 weighs 62.00kg / 136.4lbs per piece. Here is a comparison of how M807's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers under $30000
Cabinet type and Materials
ELAC Concentro M807 has a
Bass reflex type cabinet and a MDF/High-gloss lacquer finish.
Available colors
ELAC Concentro M807 is available in Black High Gloss and White High Gloss.
Recommended Accessories
Here is a list of accessories that we think you may need for the ELAC Concentro M 807.
Official Product Page
Official manufacturer's product page for the ELAC Concentro M 807 speaker can be found below:
Official Product Page for ELAC Concentro M807
Warranty
3 Years of parts warranty and 3 Years of labor warranty is generally provided by the manufacturer.