ELAC Concentro S 507.2 is a 4-way Passive Bass reflex Floor-standing speaker by ELAC. It was released in 2024. It features a JET 6 AMT Tweeter, 1 x 7" Midrange and 4 x 6" Aluminium sandwich (AS) Woofer.
Four side-firing 150 mm woofers in ELAC's impulse-compensated ICD layout; 180 mm AS-XR low-mid plus the concentric StepX-JET. Dimensions include spikes and washers.
The speaker has a frequency range of 24-50k Hz and a sensitivity of 88 dB. ELAC Concentro S507.2 has an MSRP of 15398$ per pair.
Room Size Suitability
The size of the room where you plan to use the ELAC Concentro S507.2 is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Are you nuts? |
| Small Room | Poor |
| Mid-size Room | Average |
| Large Room | Good |
| Very Large Room | Good |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
ELAC's Concentro 2.0 Series of Loudspeakers
CFS507.2 is a member of ELAC's Concentro 2.0 series of Passive speakers. Below you can see the main specs of these speakers.
See all 5 ELAC Concentro 2.0 models compared »
ELAC Concentro 2.0 Series Speakers
Frequency Response of the ELAC Concentro S507.2 Speaker
ELAC Concentro S507.2 has a Frequency response range of 24-50k Hz and Power Range of 60-500 watts. With a minimum frequency of 24 Hz, CFS507.2 delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how CFS507.2's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Floor-standing Speakers
Thinking about a subwoofer for the ELAC Concentro S507.2?
Crossover frequency of the ELAC Concentro S507.2?
The crossover points of the CFS507.2 are set at 120/400/2600Hz.
Impedance and Sensitivity
ELAC Concentro S507.2's nominal impedance level is
4 ohms but can go down to as low as
3.0 ohms, and has a sensitivity of
88 dB.
Sensitivity
Floor-standing Speakers
Nominal Impedance of the 4 Ohms means that the ELAC Concentro S 507.2 is a difficult to drive speaker from nominal Impedance perspective, make sure that you choose an amplifier than can provide 4 Ohms for this speaker.
Many AVRs (audio/video receiver) in the market may have difficulty when the speakers dip below the 4 Ohms levels (this may cause clipping or even physical damage), so we recommend to not pair the ELAC Concentro S 507.2 with an AVR but use an Integrated Amplifier instead.
Sensitivity
88dB of the ELAC Concentro S 507.2 is an average sensitivity for stereo speaker so it is neither easy nor difficult to drive Sensitivity wise. Work out how loud the ELAC Concentro S507.2 plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
Minimum Impedance of the ELAC Concentro S507.2
Even though the nominal impedance of the CFS507.2 is 4 ohms, the minimum impedance level of this speaker according to ELAC is 3.0 ohms ELAC Concentro S 507.2 so while choosing an amplifier, you should ideally check if the unit you are considering can provide this impedance level.
What amplifier does the ELAC Concentro S507.2 need?
At normal listening levels in a medium room, about
24–300 W
per channel into 4 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? See every integrated amplifier we cover.
Input Type
CFS507.2 has Binding posts type connectors and lets bi-amping/bi-wiring. Bi-wiring can enhance the overall transparency of your loudspeakers by using separate speaker wires for the low and high-frequency drivers from a single amplifier. Bi-amping, on the other hand, involves using separate amplifiers for the high and low-frequency drivers, potentially resulting in a greater dynamic range and reduced distortion.
Work out what gauge speaker cable this run needs →
ELAC Concentro S507.2 External Dimensions and Weight
ELAC Concentro S507.2 has external dimensions of (Height x Width x Depth) 48-1/16 x 10-5/8 x 14-15/16inch (1220.0 x 270.0 x 380.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of ELAC Concentro S507.2 is approximately 1026.0cm2 / 159.0inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe ELAC Concentro S507.2 weighs 37.00kg / 81.4lbs per piece. Here is a comparison of how CFS507.2's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers under $20000
Cabinet type and Materials
ELAC Concentro S507.2 has a
Bass reflex type cabinet and a MDF/High-gloss lacquer finish.
Available colors
ELAC Concentro S507.2 is available in Black High Gloss and White High Gloss.
Recommended Accessories
Here is a list of accessories that we think you may need for the ELAC Concentro S 507.2.
Official Product Page
Official manufacturer's product page for the ELAC Concentro S 507.2 speaker can be found below:
Official Product Page for ELAC Concentro S507.2
Warranty
3 Years of parts warranty and 3 Years of labor warranty is generally provided by the manufacturer.