Wilson Audio Alexia V is a 3-way Passive Bass Reflex Floor-standing speaker by Wilson Audio. It was released in 2022. It features a 1" Dome Tweeter, 1 x 7" Midrange and 1 x 10" Paper pulp Woofer.
An 8 inch and a 10 inch woofer rather than a matched pair, with a 7 inch midrange in its own rear-vented enclosure and the tweeter sealed. 120 kg each.
The speaker has a frequency range of 19-33k Hz and a sensitivity of 90 dB. Wilson Audio Alexia V has an MSRP of 75600$ per pair.
Room Size Suitability
The size of the room where you plan to use the Wilson Audio Alexia V is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Are you nuts? |
| Small Room | Poor |
| Mid-size Room | Average |
| Large Room | Good |
| Very Large Room | Good |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Frequency Response of the Wilson Audio Alexia V Speaker
Wilson Audio Alexia V has a Frequency response range of 19-33k Hz and Power Range of from 20 watts. With a minimum frequency of 19 Hz, Alexia V delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how Alexia V's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Floor-standing Speakers
Thinking about a subwoofer for the Wilson Audio Alexia V?
Impedance and Sensitivity
Wilson Audio Alexia V's nominal impedance level is
4 ohms but can go down to as low as
2.59 ohms, and has a sensitivity of
90 dB.
Sensitivity
Floor-standing Speakers
Nominal Impedance of the 4 Ohms means that the Wilson Audio Alexia V is a difficult to drive speaker from nominal Impedance perspective, make sure that you choose an amplifier than can provide 4 Ohms for this speaker.
Many AVRs (audio/video receiver) in the market may have difficulty when the speakers dip below the 4 Ohms levels (this may cause clipping or even physical damage), so we recommend to not pair the Wilson Audio Alexia V with an AVR but use an Integrated Amplifier instead.
Sensitivity
90dB of the Wilson Audio Alexia V is an average sensitivity for stereo speaker so it is neither easy nor difficult to drive Sensitivity wise. Work out how loud the Wilson Audio Alexia V plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
Minimum Impedance of the Wilson Audio Alexia V
Even though the nominal impedance of the Alexia V is 4 ohms, the minimum impedance level of this speaker according to Wilson Audio is 2.59 ohms Wilson Audio Alexia V so while choosing an amplifier, you should ideally check if the unit you are considering can provide this impedance level.
What amplifier does the Wilson Audio Alexia V need?
At normal listening levels in a medium room, about
15–20 W
per channel into 4 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? See every integrated amplifier we cover.
Input Type
Alexia V features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
Work out what gauge speaker cable this run needs →
Wilson Audio Alexia V External Dimensions and Weight
Wilson Audio Alexia V has external dimensions of (Height x Width x Depth) 50-15/16 x 15-3/4 x 24-3/16inch (1294.0 x 400.0 x 614.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Wilson Audio Alexia V is approximately 2456.0cm2 / 380.7inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe Wilson Audio Alexia V weighs 120.20kg / 264.4lbs per piece. Here is a comparison of how Alexia V's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers under $30000
Cabinet type and Materials
Wilson Audio Alexia V has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Port Position
Wilson Audio Alexia V is a rear-firing port speaker so you have to make sure you leave enough space between the back of the speaker and wall or bookshelf so that it has room to breathe.
Does the Wilson Audio Alexia V come with a Grille?
Alexia V comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Wilson Audio Alexia V.
Official Product Page
Official manufacturer's product page for the Wilson Audio Alexia V speaker can be found below:
Official Product Page for Wilson Audio Alexia V
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.