JBL 4369 is a 2-way Passive Bass Reflex Floor-standing speaker by JBL. It was released in November 2025. It features a 3" Compression Driver Tweeter and 1 x 15" Pure Pulp Woofer.
The 4367's bigger sibling: a 15 inch 2219Nd Differential Drive woofer and a 3 inch D2830B dual-diaphragm, dual-voice-coil compression driver on a Sonoglass HDI horn, crossed at 800 Hz. Dual front ports, 93 dB, 63.5 kg each.
The speaker has a frequency range of 28-25k Hz and a sensitivity of 93 dB. JBL 4369 has an MSRP of 23200$ per pair.
Room Size Suitability
The size of the room where you plan to use the JBL 4369 is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Are you nuts? |
| Small Room | Poor |
| Mid-size Room | Average |
| Large Room | Good |
| Very Large Room | Good |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
JBL's Studio Monitor Series of Loudspeakers
4369 is a member of JBL's Studio Monitor series of Passive speakers. The Studio Monitor range are JBL's premium powered monitors, descended from the brand's professional studio speakers. Below you can see the main specs of these speakers.
See all 6 JBL Studio Monitor models compared »
JBL Studio Monitor Series Speakers
Frequency Response of the JBL 4369 Speaker
JBL 4369 has a Frequency response range of 28-25k Hz and Power Range of up to 350 watts. With a minimum frequency of 28 Hz, 4369 delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how 4369's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Floor-standing Speakers
Thinking about a subwoofer for the JBL 4369?
Among the speakers in our database with a max MSRP price of 30000$ (Pair), these are the 5 Passive Floor-standing speakers that have the deeper bass levels than the JBL 4369's 28Hz:
Crossover frequency of the JBL 4369?
The crossover frequency of the 4369 is set to 800 Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
JBL 4369's nominal impedance level is
6 ohms and has a sensitivity of
93 dB.
Sensitivity
Floor-standing Speakers
Nominal Impedance of the 6 Ohms makes the JBL 4369 a relatively difficult to drive speaker compared to more frequently found 8 ohms speakers from nominal Impedance perspective.
Sensitivity
93dB of the JBL 4369 is considered a high sensitivity compared to average stereo speaker which makes 4369 an easy to drive from Sensitivity perspective. If you are planning to power your speaker with a Tube amp which are generally very low power, the JBL 4369 will be a good choice. Work out how loud the JBL 4369 plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
What amplifier does the JBL 4369 need?
At normal listening levels in a medium room, about
5.0–80 W
per channel into 6 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? See every integrated amplifier we cover.
Input Type
4369 has Binding post type connectors and lets bi-amping/bi-wiring. Bi-wiring can enhance the overall transparency of your loudspeakers by using separate speaker wires for the low and high-frequency drivers from a single amplifier. Bi-amping, on the other hand, involves using separate amplifiers for the high and low-frequency drivers, potentially resulting in a greater dynamic range and reduced distortion.
Work out what gauge speaker cable this run needs →
JBL 4369 External Dimensions and Weight
JBL 4369 has external dimensions of (Height x Width x Depth) 44-1/8 x 24-13/16 x 18-1/2inch (1120.0 x 630.0 x 470.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of JBL 4369 is approximately 2961.0cm2 / 459.0inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe JBL 4369 weighs 63.50kg / 139.7lbs per piece. Here is a comparison of how 4369's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers under $30000
Cabinet type and Materials
JBL 4369 has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Does the JBL 4369 come with a Grille?
4369 comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the JBL 4369.
Official Product Page
Official manufacturer's product page for the JBL 4369 speaker can be found below:
Official Product Page for JBL 4369