Fluance HFF is a 3-way Passive Bass Reflex Floor-standing speaker by Fluance. It was released in 2016. It features a 1" Soft-Dome Tweeter, 1 x 5" Midrange and 2 x 8" Polypropylene Woofer.
The Signature tower: a 1 inch ferrofluid-cooled silk dome, a 5 inch woven glass-fibre midrange and two 8 inch polypropylene woofers, each driver in its own sealed sub-enclosure, rear ported, on outrigger stabilisers.
The speaker has a frequency range of 35-20k Hz and a sensitivity of 89 dB. Fluance HFF has an MSRP of 800$ per pair.
Room Size Suitability
The size of the room where you plan to use the Fluance HFF is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Bad |
| Small Room | Poor |
| Mid-size Room | Average |
| Large Room | Good |
| Very Large Room | Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Fluance's Signature Series of Loudspeakers
HFF is a member of Fluance's Signature series of Passive speakers. Below you can see the main specs of these speakers.
Fluance Signature Series Speakers
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Fluance HFF Speaker
Fluance HFF has a Frequency response range of 35-20k Hz at ±3dB and Power Range of 90-200 watts. With a minimum frequency of 35 Hz, HFF delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how HFF's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Floor-standing Speakers
Thinking about a subwoofer for the Fluance HFF?
Crossover frequency of the Fluance HFF?
HFF is a 3-way speaker and its crossover frequency between the woofer and the midrange set to Hz and the Crossover frequency between the midrange and the tweeter is set to Hz.
Impedance and Sensitivity
Fluance HFF's nominal impedance level is
8 ohms and has a sensitivity of
89 dB.
Sensitivity
Floor-standing Speakers
8 Ohms is pretty much the standard nominal impedance amongst stereo speakers and amplifiers so Fluance HFF is not considered a difficult to drive speaker from nominal Impedance perspective.
Sensitivity
89dB of the Fluance HFF is an average sensitivity for stereo speaker so it is neither easy nor difficult to drive Sensitivity wise. Work out how loud the Fluance HFF plays in your room →
What amplifier does the Fluance HFF need?
At normal listening levels in a medium room, about
9.5–150 W
per channel into 8 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $1,000, or every amplifier we cover.
Input Type
HFF features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
Work out what gauge speaker cable this run needs →
Fluance HFF External Dimensions and Weight
Fluance HFF has external dimensions of (Height x Width x Depth) 47-5/16 x 10-7/8 x 15-3/8inch (1201.0 x 277.0 x 391.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Fluance HFF is approximately 1083.1cm2 / 167.9inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe Fluance HFF weighs 28.30kg / 62.3lbs per piece. Here is a comparison of how HFF's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers under $1000
Cabinet type and Materials
Fluance HFF has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Port Position
Fluance HFF is a rear-firing port speaker so you have to make sure you leave enough space between the back of the speaker and wall or bookshelf so that it has room to breathe.
Does the Fluance HFF come with a Grille?
HFF comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Fluance HFF.
Official Product Page
Official manufacturer's product page for the Fluance HFF speaker can be found below:
Official Product Page for Fluance HFF
Warranty
Lifetime of parts warranty and Lifetime of labor warranty is generally provided by the manufacturer.